KDS200双注射器注入泵

Two-Syringe Infusion Pump. This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application. 双通道注射泵。这款双通道注射泵融合了流速范围广泛与注射器尺寸范围广泛的优势，可以满足几乎所有实验室需求。 Features特点:  Holds one or two syringes, 10 µl to 140 ml each 可选择一个注射器或者两个，每个注射器是10 µl到 140 ml  最小流量0.001μl/hr（10 μl注射器)  Backlit LCD display LCD背光灯显示屏  Knob locks/unlocks drive block for effortless, drag-free manual adjustment 锁定/解锁驱动块通过旋钮可轻松手动调节  Simple menu-driven setup:设置简单，菜单提示 1. select syringe size from displayed table 显示表格中选择注射器尺寸 2. dispense volume 注射量 3. dispense flow rate 注射速率  Continuous dispense volume display 显示连续循环注射量  Preset volume control and automatic shut-off 预设注射量，到达时会自动关闭  Choice of unit selection 单位选择  Settings can be reviewed or changed during operation 运转时可以重新设置或改变参数  Stall detection 失速检测  Last settings stored in permanent memory 最后参数设置自动保存，下次开机时不需要再输入  Built-in RS232C interface for computer "daisy chaining" up to 100 pumps 内置RS232C接口可连接电脑，可以串联100台泵  TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control TTL接口可接脚踏开关、计时器、继电器控制、运行指示器输出、阀门控 制  Optional multi-step keypad programmable feature (KDS200P) 可选择的多步骤可编程型号（KDS200P）