型号: | BR-PV-SST |
产地: | 上海 |
品牌: | 泊睿 |
评分: |
![]() ![]() ![]() ![]() ![]() |
仪器简介:
★ 型号及规格:
☆ 工作室尺寸 (W×D×H)
大于UL 1703规定的最小尺寸要求
☆ 试验室温度
35℃±2℃
40℃±2℃
技术参数:
★ BR-SST系列盐雾机产品特性:
☆ PVC一体化外壳及内室;内藏式收集器;
☆ 唯一采用全侦测系统,故障发生时可亮灯显示;
☆ 采用自动加水系统,水位不足时能自动补充水位之功能,试验不中断;
☆ 盐水箱采用液位传感器,水位不足自动警报;箱盖为透明有机玻璃或观察窗,保温良好且喷雾状态直视;
☆ 精密玻璃喷嘴雾气扩散均匀,并自然落于试片,保证连续工作4000小时以上无结晶盐阻塞;
☆ 附双重超温保护,水位不足警示,确保使用安全;
☆ 温度控制器使用数字显示,PID控制温度,BR-60误差约±0.3℃;BR-90误差约±0.2℃;BR-120/160/200误差约±0.1℃;
☆ 试验室采用蒸气直接加热方式,升温速度快且均匀,减少待机时间;
☆ 喷雾塔附锥形分散器,具导向雾气、调节雾量及均匀落雾量等功能;
☆ 饱和空气桶采用SUS304不锈钢耐高温桶,保温效果佳,并提供试验室所需之湿度;
☆ 具有快速除雾功能,试验终止或暂时停机时使用此功能,可将残存试验箱内之盐雾气体强制排出室外。
★ 执行标准:
IEC 61701及UL 1703 光伏组件盐雾试验...
BR-PV-SST Salt Mist Corrosion Testing Chamber
Implementation of standards: UL 1703-2008, IEC 61701 Ed.2 (Reference IEC 60068-2-52)
Note: UL 1703-2008 regulate the chamber minimum size is (L×W×H) 1.22m×0.76m×0.91m.
Need at the same time at least begin 2 pcs 2m×1.35m Crystalline silicon module (96 pcs 156×156 cells) test, or begin 4 pcs 2m×1m modules.
Test temperature and Relative humidity:
35±2°C, 40±2°C and 93%+2-3%R.H.
Spray mode:
For UL 1703-2008: Continuous spray mode
For IEC 61701 Ed.2: Alternating spray mode
Attachment:
Acidity meter: precision 0.1pH
Coating on zinc-coated (galvanized) iron or steel:
G90 or G60 coating designation
Reference ASTM A90(A)-1991
Size: 102mm×305mm
single groove approximately: 152mm
The main performance of equipment:
Water jacket (UL 1703 test condition, option)
Double-deck Layer P.P., Good performance of insulation
Automatic water supply, water shortage can automatically supplement.
Double door, ensure the water and gas no leakage.
Precision glass nozzle, mist diffusion uniform.
Double over-temperature protection, water level warning, ensure safe use.
Temperature control precision: 0.5°C ( resolution 0.1°C )
Heating, humidification, gas delivery system, from the outside to the inside.
Compressed air fast exclusion of mist after test.
The PLC programmable control, English operation interface.
Test subject and pass criteria:
① UL 1703-2008:
after the test, the corrosion products formed on the test sample shall not be more than that formed on the reference sample as determined by visual observation. Corrosion in the scribed line area is judged by the spread of corrosion from the scribed line.
② IEC 61701 Ed.2:
Visual inspection, Maximum power determination, Insulation test, Bypass diode thermal test, Wet leakage current test, Ground continuity test.
用户单位 | 采购时间 |
Kinve Solar Power Co.,Ltd. | 2012/03/01 |
China Certification & Inspection (Group) Co.,Ltd. - Photovoltaic Laboratory | 2012/03/01 |
ShanXi LuAn Photovoltaic Technology Co.,Ltd. | 2011/09/01 |
Beijing Solar Power Institute | 2011/09/01 |
China Academy of Telecommunication Research - Photovoltaic Laboratory | 2011/06/01 |
Seraphim Solar System Co.,Ltd. | 2011/03/01 |
Zhejiang University Sunny Energy Science and Technology Co.,Ltd. | 2011/03/01 |
Dow Corning (China) Ltd. - Photovoltaic Laboratory | 2010/06/01 |
China Academy of Telecommunication Research - Photovoltaic Laboratory | 2010/06/01 |
Hengdian Group DMEGC magnetic Co.,Ltd. - Photovoltaic Laboratory | 2010/06/01 |
Jiangsu Sainty International Group - Photovoltaic System Co.,Ltd. | 2010/03/01 |
Worldwide Energy and Manufacturing USA, Inc. ( Chinese factory ) | 2010/03/01 |
China Sunergy (Nanjing) Photovoltaic Co., Ltd. | 2009/03/01 |
Jinko Solar Holding Co.,Ltd. | 2009/03/01 |
Solarfun Power Holdings Co.,Ltd. | 2008/06/01 |
Dow Corning (China) Ltd. - Photovoltaic Laboratory | 2008/03/01 |
相关产品
关注
拨打电话
留言咨询