| 供货周期： | 现货 |
| 品牌： | M2N(微纳伙伴) |
| 货号： | 10-002012-100 |
样品台
We offer a comprehensive choice of standard pin stubs to support virtually all applications. The standard SEM pin stubs are compatible with Thermo Fisher, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs. They are made from vacuum grade aluminium. They are machined according to the original manufacturer's specifications and dimensions. The flat pin stubs from 12.7mm to 38mm diameter are grooved for easy and clean handling. The most used pin stubs are the ?12.7 mm and the ?25.4 mm pin stubs. Pins are all 3.2mm diameter with a length of either 8mm or 9.5mm. The ?12.7 mm pin stubs are also available in brass, copper and high purity carbon.
The full range of standard SEM pin stubs and mounts include:
6.4, 9.5, 12.7, 19, 25.4, 32, 38, 50, 63 and 100mm stub diameter
Special 12.7mm stub diameter with a flate side and 12.7mm stub in brass and copper.
Angled pin stubs to quickly image or analyse a sample under 30°, 45°, 70° or 90° w/o tilting the sample stage:
12.7mm stub diameter with 30°, 45°, 45/90° and 70° pre-tilt in various heights
25mm diameter with 45°, 45/90°, double 45/90° and double 90°
32mm diameter with 45°and double 90°
Flat Pin stubs with extra height. Useful for marking, shorter working distance or to make your own custom stubs. Available as:
12.7mm diameter with 4mm and 6mm extra height and 25.4mm diameter with 4mm extra height
Low profile 12.7 and 25mm pin stubs to enable very short working distances for high resolution SEM imaging and FIB operations. Horizontal (flat), 90° pre-tilt, 38° pre-tilt (for FEI systems) and 35° pre-tilt (Tescan systems)
Engraved pin stubs with lines and numbers for mounting multiple samples or for relocating a sample. Stub diameters are 12.7, 19, 25.4 and 32mm.
Swivel pin mount with a top diameter of 15mm which can be tilted 90o both ways.
Dish cylinder stub with 12.7mm stub diameter for sample preparation of solutions or fluids directly on the stub. The dish design prevent fluid from dripping of the stub. Sample can be dried on the SEM stub.
Cambridge S4 stub, which is not a pin stub but used on many SEMs with pin stubs. A Cambridge S4 holder or Cambridge S4 adapter is needed for the Cambridge S4 stub.
SEM pin stub extenders to quickly adjust height and bring samples closer to the polepiece.
If you need an SEM sample pin stub which is not offered in the list below, please contact us. We can manufacture custom sample stubs or suggest a solution with other sample stubs.
相关产品
工商信息
信息已认证
联系方式
详细地址
联系电话
关注
拨打电话
留言咨询
