KDS910可定制毫升OEM模块
KDS 910 OEM Syringe Pump
The KDS 900 Microliter and KDS 910 Milliliter syringe pump modules are highly precise, they are ideal pumps for OEM applications. Two modes of operation–constant flow rate or volume dispense. Infuse and withdraw limit switches indicate when the syringe has reached the end of travel (infuse switch) or the syringe plunger has been withdrawn to its limit (withdraw switch). If either switch is activated, the pusher block movement is stopped.
KDS900微升注射泵和KDS910毫升注射泵的模块高度精密,它们是OEM应用的理想选择。该泵有恒定流量或容量分配两种操作模式。注射器到达行程末端(注入开关)或注射器推杆缩回到极限位置(抽取开关)时,注入和抽取限位开关发出指示。任意开关被激活时,推动块即停止运动。
Syringe diameter, flow rates, and target volumes are stored in non-volatile memory. Interface to the pump modules is through RS232.
注射器直径、流速、注射量都保存在非易失性内存中。通过RS232连接模块。
Features特点:
-
Constant Current Drive offers more consistent force delivery over the entire dynamic flow rate range.
恒流驱动使整个动态流速范围内的输送更稳定。
-
Independent infuse and withdraw limit switches
独立的注入和抽取限位开关
-
Linear Force – Minimum 25 lbs over entire range
线性压力——最小为25 lbs
-
Emergency stop switch at pump
紧急停止开关
启动/停止键
-
Encoder for stall detection
失速检测编码器
-
Power and run LED on the PC Board
PC面板上的电源和运行LED指示灯
-
Supports external run LED
支持外部运行LED指示灯
最多连接16台泵
精度<+/- 0.5%
-
Pump setting retained in NVRAM
泵的设置保存在非易失随机存取存储器(NVRAM)中
力度控制可调
-
Easily mounts to panel openings
易于安装到面板开口上
-
Customizable syringe mechanisms available
可提供定制注射装置
-
Customizable chassis designs available
可提供定制机壳设计
-
Lead Free Design, RoHS compliant
无铅设计,符合RoHS标准
CE认证
德可纳利(上海)仪器有限公司-KD Scientific中国代理为您提供KDS910可定制毫升OEM模块,KDSKDS 910产地为美国,属于蠕动泵,除了KDS910可定制毫升OEM模块的参数、价格、型号、原理等信息外,还可为您提供更多蠕动泵,德可纳利科技集团客服电话,售前、售后均可联系。