熔融指数仪

Melt Index Tester Model MeltFloW @on

The compact and microprocessor controlled Melt Index Tester is designed to determine MFR values in g/10 min., MVR values in ccm/10 min as well as the melt density in g/ccm.

This equipment is suitable for determinations in accordance with following standards:

ASTM D 1238, method A and B
ISO 1133
and others
Genuine modular testing instrument with microprocessor unit for the computation of

up to 50 MFR or MVR individual values per attempt
Average value, standard deviation
Shear stress, Shear rate and Viscosity

PC support
The programming, controlling, evaluation and documentation of the measured values are made by an attached PC by means of the comfortable and operator-friendly WINDOWS software k-BASE. Further software modules for the process control, the data export, assignment of access authorizations and for the simultaneous control of several instruments by one PC (multi-equipment control) are included.

Standard accessories:
linear displacement gauge for the measurement of the MVR values in ccm/10 min.
Piston, nozzle, cleaning tool
Optionally:
automatic weight lifting device
automatic cutting device
manual cutting device
Nozzle plugging device (for low viscose materials)

Melt Index Tester Model MeltFloW @on

Data Sheet
Temperature Range: +100°C to +400°C (optional +450°C)
Resolution: 0,1 K
Dimension (WxDxH): 400 x 450 x 470 mm (basic configuration)
Weight: approx. 31 kg (basic configuration)
Power Supply: 230/115 V, 50/60 Hz, 1,6 kW

Melt Index Tester Model MeltFloW @on 

The compact and microprocessor controlled Melt Index Tester is designed to determine MFR values in g/10 min., MVR values in ccm/10 min as well as the melt density in g/ccm.

This equipment is suitable for determinations in accordance with following standards:

ASTM D 1238, method A and B
ISO 1133
and others
Genuine modular testing instrument with microprocessor unit for the computation of

up to 50 MFR or MVR individual values per attempt
Average value, standard deviation
Shear stress, Shear rate and Viscosity

PC support
The programming, controlling, evaluation and documentation of the measured values are made by an attached PC by means of the comfortable and operator-friendly WINDOWS software k-BASE. Further software modules for the process control, the data export, assignment of access authorizations and for the simultaneous control of several instruments by one PC (multi-equipment control) are included.

Standard accessories:
linear displacement gauge for the measurement of the MVR values in ccm/10 min.
Piston, nozzle, cleaning tool
Optionally:
automatic weight lifting device
automatic cutting device
manual cutting device
Nozzle plugging device (for low viscose materials)