熔融指数仪

Melt Index Tester Model MeltFloW @on plus

An evolution of Melt Flow Testing: The MeltFloW @on plus. A complete equipped instrument suitable for the determination of MFR values in g/10 min., MVR values in ccm/10 min as well as the melt density in g/ccm.

This equipment is suitable for determinations in accordance with following standards:

ASTM D 1238, method A and B
ISO 1133
and others
Genuine modular testing instrument with microprocessor unit for the computation of

up to 50 MFR or MVR individual values per test run
Average value, standard deviation
Shear stress, Shear rate and Viscosity
PC support
The programming, controlling, evaluation and documentation of the measured values are made by an attached PC by means of the comfortable and operator-friendly WINDOWS software k-BASE. Further software modules for the process control, the data export, assignment of access authorizations and for the simultaneous control of several instruments by one PC (multi-equipment control) are included.

Standard accessories:
linear displacement gauge for the measurement of the MVR values in ccm/10 min.
automatic cutting device
automatic weight lifting device
Piston, nozzle, cleaning tool
integrated set of weights from 1,05 kg to 21,6 kg
system for precompression during preheating time

Melt Index Tester Model MeltFloW @on plus

Data Sheet
Temperature Range: +100°C to +400°C (optional +450°C)
Resolution: 0,1 K
Dimension (WxDxH): 400 x 450 x 1050 mm
Weight: approx. 85 kg
Power Supply: 230/115 V, 50/60 Hz, 1,6 kW

Melt Index Tester Model MeltFloW @on plus

An evolution of Melt Flow Testing: The MeltFloW @on plus. A complete equipped instrument suitable for the determination of MFR values in g/10 min., MVR values in ccm/10 min as well as the melt density in g/ccm.

This equipment is suitable for determinations in accordance with following standards:

ASTM D 1238, method A and B
ISO 1133
and others
Genuine modular testing instrument with microprocessor unit for the computation of

up to 50 MFR or MVR individual values per test run
Average value, standard deviation
Shear stress, Shear rate and Viscosity
PC support
The programming, controlling, evaluation and documentation of the measured values are made by an attached PC by means of the comfortable and operator-friendly WINDOWS software k-BASE. Further software modules for the process control, the data export, assignment of access authorizations and for the simultaneous control of several instruments by one PC (multi-equipment control) are included.

Standard accessories:
linear displacement gauge for the measurement of the MVR values in ccm/10 min.
automatic cutting device
automatic weight lifting device
Piston, nozzle, cleaning tool
integrated set of weights from 1,05 kg to 21,6 kg
system for precompression during preheating time