供货周期: | 一周 |
品牌: | Ted Pella |
货号: | 91202 |
The carbon fiber threads or braids are used in carbon coaters or carbon coating attachments, used on sputter coaters, designed for the use of carbon fiber. The thin carbon layer will act as a conductive layer on non-conductive samples to enable charge free imaging and EDS X-ray analysis. The carbon fiber braids, when attached properly to the holding posts, will give repeatable carbon coating thickness when the same distance from sample surface to evaporation source is used. The carbon fiber braids are processed to resist unraveling at the ends when cut to length. The special heat treatment also produces a spectrographically pure carbon fiber, with impurities only up to a maximum level of 5-10ppm which is not detectable by EDS systems. Saves the work of shaping carbon rods. The power requirement is approximately 20V/20A depending on diameter, but varies depending on the brand of coater. Please consult the instructions with the coater to determine which carbon fiber thread fits best.
The carbon fiber threads are available in three thread diameters; 2.5, 1.3 and 0.8mm.
The thicker thread with a diameter of 2.5mm and a density of 1.6g/m is widely used in general applications and gives a medium carbon layer thickness. This thicker thread is recommended for use on carbon coaters made by Quorum Technologies, SPI, Emitech, Polaron, Fisons and Technics.
The medium thread with 1.3mm diameter and a density of 0.7g/m is recommended for the same carbon coaters as mentioned above, but for applications where a thinner carbon coating is required. The carbon coating thickness can be increased by using multiple threads.
The thinner thread with a diameter of 0.8mm and a density of 0.4g/m is recommended for the thinnest carbon coatings. The thinner thread also exhibits better compatibility with carbon coaters made by Fullam, Leybold, Denton and Baltec.
相关产品
​高压冷冻帽 (Freezer Hats for High Pressure Freezing)
小样品裂片钳
CleanBreak 晶圆切割钳
PELCO LatticeAx 大样品支架
Pelcotec SEM线宽标样CDMS - XY 特征尺寸放大标样
Pelcotec扫描电镜线宽标样CDMS - XY ISO特征尺寸放大标样
Pelcotec SEM线宽标样 CDMS 标准特征尺寸放大标样
Pelcotec扫描电镜线宽标样 CDMS ISO标准特征尺寸放大标样
单面、碳钢Gem?刀片
超声波清洗机3510型 17686-2 超声波清洗机3510型,机械定时, 130 W
超声波清洗机5510型 17820-2 超声波清洗机5510型,机械定时+加热, 469 W
钻石刀,标准SU型 122-SU-50 标准钻石刀, SU, 5.05mm, "S" 型
AFM金属样品圆片 16219 20mm
PELCO? AFM圆片夹
AFM金属样品圆片 16218 15mm
详细地址
联系电话
关注
拨打电话
留言咨询