人前列腺素F(PGF)ELISA Kit

 产品名称： 人前列腺素F(PGF)ELISA Kit
 
 英文名称： human Prostaglandin F,PG-F ELISA Kit
 
 货号： CSB-E07019h
 
 规格： 96T
 
 种属： human
 
 待测物名称： Prostaglandin F,PG-F
 
 缩写： PG-F
 
 反应时间： 1-5h
 
 所需样本体积： 50-100ul
 
 检测波长： 450 nm
 
 用途： For research use only. Not for diagnostic use.
 
 精密度： Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
 
 样本搜集及储存： Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
 
 检测步骤： Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
 
 结果计算： Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the PGF concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
  
相关产品：

 
产品名称 英文名称 货号 规格
 大鼠前列腺素E1(PGE1)ELISA Kit  rat Prostaglandin E1,PG-E1 Elisa kit  CSB-E07016r  96T 
        
 大鼠皮质酮/肾上腺酮(CORT)ELISA Kit  Rat Corticosterone,CORT ELISA Kit  CSB-E07014r  96T 
        
 人前列腺素E1(PGE1)ELISA Kit  human Prostaglandin E1,PG-E1 ELISA Kit  CSB-E07018h  96T 
        
 兔糖化血红蛋白A1c(GHbA1c)ELISA Kit  Rabbit Glycated hemoglobin A1c,GHbA1c ELISA Kit  CSB-E07011Rb  96T 
        
 兔胶原吡啶交联(PYD)ELISA Kit  Rabbit pyridinoline (PYD) ELISA Kit  CSB-E07012Rb  96T 
        
 大鼠前列腺素F(PGF)ELISA Kit  rat Prostaglandin F,PG-F ELISA Kit  CSB-E07020r  96T 
        
 兔前列腺素F(PG-F)ELISA kit  Rabbit prostaglandin F(PG-F) ELISA kit  CSB-EQ027356RB  96T 
        
 小鼠前列腺素F(PGF)ELISA Kit  Mouse Prostaglandin F,PG-F ELISA Kit  CSB-E07868m  96T 
        
 犬骨桥素(OPN)ELISA Kit  Canine Osteopontin,OPN ELISA Kit  CSB-E07013c  96T 
        
 兔淋巴细胞功能相关抗原3(LFA-3/CD58)ELISA Kit  Rabbit lymphocyte function associated antigen 3,LFA-3 ELISA Kit  CSB-E07017Rb  96T 
        
 兔半胱氨酸蛋白酶抑制剂/胱抑素C(Cys-C)ELISA Kit  Rabbit Cystatin C,Cys-C ELISA Kit  CSB-E07010Rb  96T 
        
 兔儿茶酚胺(CA)ELISA Kit  Rabbit catecholamine,CA ELISA Kit  CSB-E07015Rb  96T