型号: | PM100 |
产地: | 美国 |
品牌: | Thorlabs |
评分: |
![]() ![]() ![]() ![]() ![]() |
特点:
3种类型的光电探头:标准、条形和积分球
功率范围:5nW-1W
60dB动态范围
波长范围:200-1100nm,400-1100nm,700-1800nm
提供红外卡便于探头对准(吸收带400-640nm,800-1700nm)
NIST标准可追踪数据存储
功率范围和测量波长的设定
6Hz采样速率
模拟输出及RS232接口
可连续工作18小时
LCD显示具有GUI界面,数字化显示便于读取数据:
数字化功率显示
仿真的模拟输出指针
X-Y坐标图趋势分析
矩形图
测量统计
型号 |
PM120 |
PM120V |
PM121 |
PM122 |
PM130 |
PM132 |
PM140 |
PM144 |
探头规格 |
标准 |
条形 |
积分球 |
|||||
探头型号 |
S120B |
S120UV |
S121B |
S122B |
S130A |
S132A |
S140A |
S144A |
功率范围 |
50 nW-50 mW |
0.5-500mW |
35 nW-35 mW |
5 nW–5 mW / 500nW-500 mW(中性滤光片可选) |
1 µW – 1 W |
|||
波长范围 |
400-1100nm |
200-1100nm |
400-1100nm |
700-1800nm |
400 – 1100nm |
700 –1800nm |
400 –1100nm |
800-1700 nm |
探头类型 |
硅 |
硅 |
硅 |
锗 |
硅 |
锗 |
硅 |
铟镓砷 |
噪声水平 |
1nW |
1nW |
10nW |
10nW |
100pW |
1nW |
10nW |
10nW |
靶面尺寸 |
10 mm x 10 mm (0.39" x 0.39") |
10 mm x 10mm (0.39" x 0.39") |
Ø1 mm |
|||||
通光孔径 |
Ø9.5 mm (Ø0.37") |
Ø9.5 mm (Ø0.374") |
Ø5 mm (Ø0.197") |
|||||
接口螺纹 |
SM1 (1.035"-40) |
— |
2 x M2.5 |
|||||
中性滤光片距离 |
2.6 mm (0.10") |
1.2 mm (0.047") |
— |
|||||
探测器距离 |
5.6 mm (0.22") |
3.3 mm (0.130") |
— |
|||||
测量不确定度 |
± 5% |
|||||||
测量标准 |
NIST |
|||||||
损伤阈值 |
50 W/cm² |
10 W/cm² (50 W/cm²) |
200 W/cm² |
|||||
最大能量 |
20 µJ |
2 µJ (20 µJ) |
2 mJ |
|||||
探头尺寸 |
12.7 mm x Ø30.5 mm |
150 mm x 19 mm x 10 mm |
30.5 mm x Ø45 mm |
|||||
接线长度 |
1.5m (60") |
|||||||
重量 |
0.07 kg (0.155l bs) |
0.125 kg (0.275 lb) |
0.125 kg (0.275 lb) |
|||||
通用表头指标 |
||||||||
兼容性 |
光电探头: S120, S130, S140系列;热探头: S200系列 |
|||||||
显示器类型 |
55 x 38 mm LCD, 240 x 160像素, 带背光 |
|||||||
显示格式 |
数字,条形,模拟指针,曲线,统计 |
|||||||
功率单位 |
nW, µW, mW, W, dBm, dB |
|||||||
准确度 |
±1% |
|||||||
分辨率 |
16-Bit 到24-Bit (0.01%全量程) |
|||||||
采样速率 |
数字: 3 Hz, 模拟: 6 Hz |
|||||||
计算机接口 |
RS232, 波特率2400到 115200 bps, DB9公接头 |
|||||||
尺寸(H x W x D) |
230 mm x 95 mm x 55 mm (9" x 3.7" x 2.2) |
|||||||
重量 |
0.5 kg (1.1 lbs) |
|||||||
工作温度 |
5 - 40°C |
|||||||
存放温度 |
-20°C - 70°C |
|||||||
模拟输出 |
||||||||
电压范围 |
0 - 4.095 V (软件调节: 0.001 V/mW - 1000 V/mW) |
|||||||
分辨率 |
12-Bit(1mV) |
|||||||
采样速率 |
6 Hz |
|||||||
接头 |
SMA |
|||||||
供电方式 |
||||||||
电池 |
可换NiMH电池, 1500 mAh, 3.6 V |
|||||||
工作时间 |
达18小时 (无背光显示时) |
|||||||
关闭 |
自动关闭 |
|||||||
充电器 |
含充电器 |
|||||||
充电器供电电源 |
输入: 85 - 265 VAC, 50 - 60 Hz; 输出: 9 VDC @ 1.1 A |
PM200系列高功率数字式功率计
特点
功率范围:20mW~3W(PM210),20mW~10W(PM212),100mW~30W(PM213)
波长范围:250nm~10.6um
热探头设计提供全波段的均匀响应
测量采样频率6Hz
功率范围和测量波长的设定
模拟输出及RS232接口
可连续工作18小时
图形化数字显示界面
型号 |
PM210 |
PM212 |
PM213 |
探头指标 |
|||
探头型号 |
S210A |
S212A |
S213A |
功率范围 |
20 mW - 3 W |
20 mW - 10 W |
100 mW - 30 W |
波长范围 |
250 nm - 10.6 µm |
||
探测器类型 |
热吸收探头 |
||
噪声水平 |
0.5mW |
0.5mW |
5mW |
靶面尺寸 |
- |
||
通光孔径 |
Ø19 mm (Ø3/4") |
Ø12.7 mm (Ø1/2") |
Ø15.9mm (Ø5/8") |
接口螺纹 |
3/4-32 |
- |
|
中性滤光片距离 |
- |
||
探测器距离 |
8 mm (0.315") |
55.9 mm (2.2") |
9.7 mm (0.0.38") |
测量不确定度 |
± 5% |
||
测量标准 |
NIST |
||
损伤阈值 |
200 W/cm² CW |
||
最大脉冲能量 |
3.3 J/cm² (1 ms脉冲 @ 1064 nm) |
||
探头尺寸 |
33.0 x Ø63.5 mm (1.3” x Ø2.5”) |
81.3 x Ø63.5 mm (3.2” x Ø2.5”) |
92.5 x Ø63.5 mm |
接线长度 |
1.8 m (71") |
||
重量 |
0.51 kg (1.13 lbs) |
||
通用表头指标 |
|||
兼容性 |
光电探头: S120, S130, S140系列; 热探头: S200系列 |
||
显示器类型 |
55 x 38mm LCD, 240 x 160像素, 带背光 |
||
显示格式 |
数字,条形,模拟指针,曲线,统计 |
||
功率单位 |
nW, µW, mW, W, dBm, dB |
||
准确度 |
±1% |
||
分辨率 |
16 bit - 24 bit (0.01% 全量程) |
||
采样速率 |
数字: 3 Hz, 模拟: 6 Hz |
||
计算机接口 |
RS232, DB9公接头 |
||
尺寸 (H x W x D) |
230 mm x 95 mm x 55 mm (9" x 3.7" x 2.2") |
||
重量 |
0.5kg (1.1 lbs) |
||
工作温度 |
5°C - 40°C |
||
存放温度 |
-20°C to 70°C |
||
模拟输出 |
|||
电压范围 |
0 - 4.095 V (Software Adjustable: 0.001 V/mW - 1000 V/mW) |
||
分辨率 |
12 bit (1 mV) |
||
采样速率 |
6 Hz |
||
接头 |
SMA |
||
供电电源 |
|||
电池 |
可换NiMH电池, 1500 mAh, 3.6 V |
||
工作时间 |
达18小时 (无背光时) |
||
关闭 |
手动/自动, 时间可调 |
||
充电器 |
含充电器 |
||
充电器电源 |
输入: 85 - 265 VAC, 50 - 60 Hz; 输出: 9 VDC @ 1.1 A |
通用表头特点
可编程通道:实示、差分、比例、数学函数、线形或指数值、衰减
USB2.0接口和软件程序
大的图形显示界面
可兼容探头:S100(光电探头)、S200(热探头)和普通光电二极管
光电或热探测的程序化响应
模拟输出仿真
PM300E附加功能
连续或单次脉冲的能量测量
可调的触发阈值、光束直径和波长
能量显示J或J/cm2,平均功率显示W或W/cm2,重复频率Hz
外部触发的功率和能量测量
型号 |
PM300 |
PM300E |
|
通道 |
CH1 and CH2 |
CH1 and CH2 |
|
通道数 |
2 |
2 |
|
可兼容探头 |
光电探头(两通道) |
光电探头(两通道)
未校准光电二极管(两通道) |
|
显示 |
Large 4.4" LCD Display |
Large 4.4" LCD Display |
|
显示刷新速率 |
20 Hz |
20 Hz |
|
显示项 |
Numerical Readout (Watt or dBm), Time Series Chart, Bar Graph, Statistical Functions |
Numerical Readout (Joule, Watt or dBm), Time Series Chart, Bar Graph, Statistical Functions |
|
尺寸(H x W x D) |
220 x 122 x 325 mm |
220 x 122 x 325 mm |
|
重量 |
<4 kg |
<4 kg |
|
Operating Temperature |
0 °C to 40 °C |
0 °C to 40 °C |
|
Storage Temperature |
-40 °C to 70 °C |
-40 °C to 70 °C |
|
Operation with Our Calibrated Photodiode Sensors |
|||
Compatible with Channels |
CH1 and CH2 |
CH1 and CH2 |
|
Display Units |
Watt, dBm, Amp |
Watt, dBm, Watt/cm² |
|
Measurement Ranges |
7 Decades |
6 Decades |
|
Accuracy |
±0.2% on Low Range Scale |
±0.2% on Low Range Scale |
|
Bandwidth |
DC to 100 kHz, Dependent on Sensor and Settings |
DC to 100 kHz, Dependent on Sensor and Settings |
|
Wavelength Correction |
Automatic After User Sets Operation Wavelength (Calibration Data is Integrated into all Our Sensors) |
Automatic After User Sets Operation Wavelength (Calibration Data is Integrated into all Our Sensors) |
|
Connector |
DB9 (Rear) |
DB9 (Rear) |
|
Operation with Our Calibrated Thermopile Sensors |
|||
Compatible with Channels |
CH1 |
CH1 |
|
Units |
Watt, dBm, Volt |
Watt, dBm, Volt, Watt/cm² |
|
Measurement Ranges |
4 Decades |
3 Decades |
|
Accuracy |
±0.5% Full Scale |
±0.5% Full Scale |
|
Bandwidth |
DC to 10 Hz, Dependent on Sensor and Settings |
DC to 10 Hz, Dependent on Sensor and Settings |
|
Wavelength Correction |
No Wavelength Correction Required |
No Wavelength Correction Required |
|
Connector |
DB9 (Rear) |
DB9 (Rear) |
|
Operation with a Non-Calibrated Photodiode |
|||
Compatible with Channels |
CH1 and CH2 |
CH1 and CH2 |
|
Units |
Watt, dBm, Amp |
Watt, dBm |
|
Measurement Ranges |
7 Decades; 10 nA to 10 mA |
6 Decades; 10 nA to 10 mA |
|
Accuracy |
±0.2% on Low Scale (1 A to 10 mA) |
±0.2% on Low Scale (1 µA to 10 mA) |
|
Bandwidth |
DC to 100 kHz, Dependent on Photodiode and Settings |
DC to 100 kHz, Dependent on Photodiode and Settings |
|
Polarity |
AG, CG |
AG, CG |
|
Bias Voltage |
0 to -10 V (CG), 0 to 10 V (AG) |
0 to -10 V (CG), 0 to 10 V (AG) |
|
Responsivity Correction |
Set By User (A/W) |
Set By User (A/W) |
|
Connector |
BNC (Front) |
BNC (Front) |
|
Operation with a Energy Sensors |
|||
Compatible with Channels |
N/A |
CH1 and CH2 |
|
Units |
N/A |
Joule, Joule/cm², Watt |
|
Measurement Ranges |
N/A |
4 Decades |
|
Accuracy |
N/A |
±0.5% of High Scale |
|
Maximum Repetition Rate |
N/A |
5 kHz |
|
Connector |
N/A |
BNC (Front) |
|
Standard Analog Outputs |
|||
Signal |
CH1, CH2 Amplified Input Signal |
CH1, CH2 Amplified Input Signal |
|
Voltage Range |
0 to ±10 V |
0 to ±10 V |
|
Bandwidth |
Up to 100 kHz, Dependent on Sensor and Settings |
Up to 100 kHz, Dependent on Sensor and Settings |
|
Connector |
BNC Connectors in the Rear |
BNC Connectors in the Rear |
|
Programmable Analog Output |
|||
Signal |
Selectable: CH1, CH2, CH1-CH2, CH1/CH2 |
Selectable: CH1, CH2, CH1-CH2, CH1/CH2 |
|
Voltage Range |
0 to ±10 V; Programmable Gain and Offset |
0 to ±10 V; Programmable Gain and Offset |
|
Bandwidth |
Up to 500 Hz, Dependent on Sensor and Settings |
Up to 500 Hz, Dependent on Sensor and Settings |
|
Connector |
BNC (Rear) |
BNC (Rear) |
|
PC Interface |
|||
Type |
USB 2.0 |
USB 2.0 |
|
Connector |
USB B (Rear) |
USB B (Rear) |
|
LaserPoint功率计能量计
LaserPoint 是一家生产激光功率计能量计的意大利公司,其产品包括质量一流、可测波段涵盖紫外到中红外几乎所有激光波长、可测功率可达数千瓦、能量可达数百焦耳的各种类型探头,还有各种智能探头连接器、模拟\数字表头、模拟\数字接口及应用软件。其产品应用覆盖工业、医疗、科研等众多领域。
表面吸收热探头
² 最大可测300W高功率工业激光
² 探测面积最大可达到60mm
² 探测灵敏度最低至15mW
² 高损伤阈值,功率密度20mW/cm2以及能量密度0.5J/cm2
² NIST标准以及PTB标准
型号 |
功率范围 |
最大间隙能量(2分钟) |
能量范围 |
探头孔径 |
光谱范围 |
制冷 |
A-40-D25-BBF |
10mW - 40W |
60W |
200mJ-40J |
Ø25mm |
0.19-25μm |
TEC |
A-40-D25-HCB |
10mW - 40W |
60W |
200mJ-40J |
Ø25mm |
0.25-11μm |
TEC |
A-40-D40-HPB |
10mW - 40W |
60W |
200mJ-40J |
Ø 40mm |
0.25-11μm |
TEC |
A-40/200-D25-HPB |
100mW - 40W |
200W |
1J-200J |
Ø25mm |
0.25-11μm |
TEC |
A-40/200-D40-HPB |
100mW - 40W |
200W |
1J-200J |
Ø40mm |
0.25-11μm |
TEC |
A-40/200-D60-HPB |
100mW - 40W |
200W |
1J-200J |
Ø60mm |
0.25-11μm |
TEC |
A-200-D25-HPB |
100mW - 200W |
250W |
1J-200J |
Ø25mm |
0.25-11μm |
空冷 |
A-200-D40-HPB |
100mW - 200W |
250W |
1J-200J |
Ø40mm |
0.25-11μm |
空冷 |
A-200-D60-HPB |
100mW - 200W |
250W |
1J-200J |
Ø60mm |
0.25-11μm |
空冷 |
A-300-D60-HCB |
100mW - 300W |
450W |
1.5J-300J |
Ø60mm |
0.25-11μm |
空冷 |
A-600-D40-HPB |
200mW - 600W |
800W |
3J-600J |
Ø40mm |
0.25-11μm |
空冷 |
W-600-D30-HPB |
100mW - 600W |
800W |
3J-600J |
Ø30mm |
0.25-11μm |
水冷 |
体吸收热探头—用于测量高峰脉冲激光
型号 |
功率范围 |
平均功率密度 (max)(W/cm2) |
峰值功率密度 (max)(GW/cm2) |
能量范围 |
探头孔径 |
光谱范围 |
制冷 |
10-UVC-D25 |
10mW-10W |
40 |
0.1 |
25mJ-10J |
Ø25mm |
0.19-0.25μm |
TEC |
10-UVA-D25 |
10mW-10W |
9 |
0.1 |
25mJ-10J |
Ø25mm |
0.25-0.4μm |
TEC |
10-BB-D25 |
10mW-10W |
35 |
100 |
25mJ-10J |
Ø25mm |
0.4-5.2μm |
TEC |
20-UVC-D40 |
10mw- 20W |
40 |
0.1 |
200mJ-20J |
Ø40mm |
0.19-0.25μm |
TEC |
20-UVA-D40 |
20mW-20W |
9 |
0.1 |
200mJ-20J |
Ø40mm |
0.25-0.4μm |
TEC |
20-BB-D40 |
20mW- 20W |
35 |
100 |
200mJ-20J |
Ø40mm |
0.4-5.2μm |
TEC |
焦热电型探头—用于测量脉冲激光器
型号 |
制冷 |
功率范围 |
能量范围 |
探头孔径 |
光谱范围 |
ED200 |
TEC |
10mW-10W |
0.2mJ-8J |
22.85mm |
0.19-40um |
ED200-LA |
TEC |
10mW-20W |
1mJ-30J |
23mm |
0.5-3um |
ED500 |
TEC |
10mW-20W |
1.3mJ-40J |
46mm |
0.19-40um |
功率计/能量计表头
Laser Point 提供三种表头通过智能接口与探头相连来显示测量结果。智能接口能自动识别新插入的探头。表头将探头输出的电压信号转变成需要的功率、能量值以及重复频率等。所有表头都配有与计算机通讯的接口。三种性价比不同的表头,从普通型的PLUS,TPM300到高性能型双通道的DUO,用户可根据预算选配。
PLUS-USB PC-LINK
型号 |
测量模式 |
显示 |
量程 |
分辨率 |
PLUS-USB |
功率&能量,FIT |
4位数字液晶 可方便接入电脑 |
1mW-10kW;1mJ-300J |
0.5‰ |
PC-LINK |
功率&能量,FIT |
无液晶显示 可方便接入电脑 |
1mW-10kW;1mJ-300J |
0.5‰ |
激光功率探针
激光探针是对激光功率测量方法的突破。Laser point公司提供Cronos和Fit两个系列的激光探针,内置微处理器.根据温度动力学确定最佳测量时间长度,全自动运算得出功率参数,可多次测量而无需制冷。
Cronos系列: 全自动,高功率探针
LCD同步显示功率,精度,测试波长(CO2 ,Nd-YaG, Diodes),低电 压提示
-3 种模式(功率幅度:1.5W -- 10KW)
-10秒测量和显示时间
-±2% 良好重复性
-±4% 精度
-高分辨率(1W-10KW)
客户可校准
订货信息
编号(订货时请加上编号) |
符号 |
Digital Laser Power Probe(30-1500W) |
Cronos 1.5 |
Digital Laser Power Probe(100-5000W) |
Cronos 5.0 |
Digital Laser Power Probe(200-10000W) |
Cronos10 |
NIST/PTB Traceability Certificate(on request) |
-Cert |
订单号样式:Cronos5.0-Cert |
|
Fit系列: 全自动,低功率探针
- LCD同步显示功率,测试波长(CO2 ,Nd-YaG), 低电压提示
-3 种模式(500mW - 500W)
-4秒测量和显示时间
-±1% 重复性
-±3% 精度
-客户可校准
相关产品
Photon+近红外相机+ZEPHIR 2.9
斯坦福全线设备维修+维修+SR830
Avesta+AFsG+倍频器
Wasatch+体相位全息光栅+VPH光栅
台湾匠星+电位移台
光学隔振平台
Pyrosensor+SeriesHP+功率计
Pyrosensor+PEM45HP+能量计
superlum+超辐射发光二极管+SLD
Wasatch Photonics+Cobra +OCT光谱仪
Femto+MERCURY+飞秒激光器
Quantum+GHz+飞秒激光器
Highfinesse+Lynceus+近红外相机
EXCELITAS+SPCM+单光子计数模块
TeraSense+TERA-256+太赫兹相机
关注
拨打电话
留言咨询