型号: | BJ12 |
产地: | 法国 |
品牌: | VINCI TECHNOLOGIES |
评分: |
![]() ![]() ![]() ![]() ![]() |
此设备在样本和载玻片之间提供均匀的厚度。将样品粘合到载玻片上是薄切片制备中的关键步骤。成功的切割,研磨和抛光很大程度上依赖于粘片质量,即最大限度地减少胶层的厚度。首先,在载玻片和试样上涂上一薄层环氧树脂,然后将样品精确黏贴,为了提高粘合效率,应将组件放置在加热的粘合机上,使其在压力和温度下高质量的粘合。此设备可同时处理最多12个小尺寸样品(26x46,27x47,28x48,30x45),6个大样品(50x75)或6个小样品和3个大样品的组合。
温度:可调节范围20至130℃
重量:10公斤
尺寸:217x124x708毫米
电源:220VAC,50/60Hz
可调节加热温度
无弹簧设计,每个样品可独立设置压力
同时处理12个样本且保持恒温(高达80℃)
| |
The bonding jig is designed to provide a uniform thickness of bonding material between specimens and glass sides. Bond the rock sample on its glass slide is a very important step in the thin section preparation. The success of grinding, lapping and polishing steps depends of the quality of bonding. The objective is to obtain very thin layers of glue. First, a thin layer of epoxy resin is applied on both the glass slide and the specimen. The glass slide is then manually stuck on the sample. To improve the bonding, the complete assembly is placed on the heating bonding press which allows to bond specimen and glass slide under pressure and temperature: The specimen is pressed on its glass slide thanks to an individual weight whereas the temperature is controlled from 20°C to 130°C +/- 2°C to ensure perfect bonding.
|
相关产品
EXAKT金刚石病理切骨机E302
LISICO乐思科核磁共振颗粒表面特性分析仪LS-1
德国LUM 多波长分离行为分散仪LUMiReader&PSA
德国LUM粘附力分析仪LUMiFrac®
德国LUM X射线分离行为分散仪LUMiReader® X-RAY
德国LUM稳定性分析仪LUMiFuge®
德国LUM分散体系分析仪LUMiSizer®
美国BQ数字扫描显微镜SCAN-OSTEO
美国BQ图像采集及骨生物学研究系统
德国EXAKT全自动数显磨片机400CS
德国EXAKT金刚石带锯精密切磨系统312
德国EXAKT金刚石带锯精密切磨系统311CL
德国EXAKT金刚石带锯精密切磨系统310CP/CL
德国EXAKT金刚石带锯精密切磨系统300CP/CL
德国BIODUR片状塑化标本旋转切片机GSP
关注
拨打电话
留言咨询