All of precision instrument and HMYX-2000 computer control sponge foam indentation hardness tester(applicable to national requirements to test sponge foamsamples on standard foam soft materials, A method, B method, C method)
• indentation hardness testers standard:
GB10802 soft polyurethane foam
GB10807-2006 soft foam polymeric material indentationtesting standards
• sponge indentation tester technical parameters:
(1), speed: 100mm/min;
(2), indentation hardness measurement range: 0-2000.0 N
(3), the force resolution: 0.25 N
(4), error: <1%
• indentation hardness features:
☆ automatic reset: the computer is connected to the start of the experiment instruction, automatic reset system.
☆ automatic return: fracture of the specimen, automatically return to the initial position.
☆ automatic shift: according to the size of the load, can switch different gear, ensuring measurement accuracy.
☆ change speed: This machine according to different samples, arbitrarily change the test speed.
☆ indication calibration: calibration system can realize thevalue of the.
☆ control method: according to the testing requirementscan test methods test force, velocity, displacement, straintest.
A multi-purpose machine: sensors with different specifications, can realize the use of a machine.
☆ curve traversal: after completion of the test, the mouse can be used to find out the test curve of arbitrary point of the stress and deformation data and analysis.
☆ display: dynamic data and test curve display.
☆ results: test results can access, analyze the data curve.
☆ limit: with programmed and mechanical limit.
☆ overload: stop automatically when the load exceeds the rated value.
• foam indentation hardness characteristics:
☆ sag is set in advance, through the timing circuit for accurately controlling the subsidence quantity;
☆ convenient use: high precision of the pressure sensor and the large scale integrated circuit;
Accurate determination of ☆: provide three methods fordetermination of indentation hardness;
☆ pressure head runs smoothly, the speed of 100mm/min;
☆ indentation hardness measurement range: 0-2000 N
☆ force minimum resolution: 0.2 N
☆ measurement error: <1
Other sponge detection instrument
Ball rebound tester HMLQ-500
Tensile strength testing machine HMLS-1000
Fatigue indentation test machine HMPL-2000
Compression deformation tester HMYS
1年
否
有
1人次免费培训
12个月
12个月
24小时达到现场
相关产品