仪器对比
关注
- 该产品满足 <药品经营质量管理规范>GSP 对冷藏车温湿度自动检测有相关要求。
FEATURES:
Alarm set points (temperature only)
Recording interval (temperature/humidity)
Start delay
Unit description
User may set Time zone
Temperature unit of measure
Stop key enable
IMMEDIATELY KNOW THE TEMPERATURE AND HUMIDITY EXCURSION DURATION
Active LCD display technology allows the duration (cumulative time) for the temperature excursion to be viewed on the display immediately without the need to download data. The user may select the acceptable humidity and temperature parameters (high and low values) in 1% or 1° increments. The cumulative alarm duration timer is started each time the humidity and/or temperature reading is outside an acceptable parameters providing a total excursion time since the start of recording.
ALARM TALLY AND USER SELECTABLE NOTIFICATION
LCD shows the running alarm tally based on the acceptable humidity/temperature range and recording interval. Alarm tally is incremented, when readings move outside parameters during the recording interval.
USER SELECTABLE RECORDING INTERVALS
For complete flexibility, the user-defined recording interval may be set based on the number of desired days to log (from 4 hours to 365 days) or the desired time interval (from every 2 seconds to every 24 hours). Internal flash memory stores 7680 readings. To insure that no data is lost, once the memory is full the thermometer/hygrometer will stop logging data (data will not be overwritten). While recording, the following information is displayed: Current relative humidity and temperature, Min/Max temperature achieved, cumulative running time. Once an alarm condition has occurred, the following additional information is displayed: Alarm Tally, “ALARM” notification, cumulative alarm time.
COMPACT SIZE AND IP66 WATERPROOF RATING
Measuring only 3.25 x 2 x 1.12 inches and weighing only 0.85 ounces, it is the perfect solution for monitoring material in transit as well as reagents, clinical samples, botanical environments, pharmaceuticals and food items in any location. Waterproof design (IP66) eliminates concerns when located in damp environments or areas that are required to be washed down.
TRACEABLE TO NIST FOR ACCURACY
An individually-numbered Traceable® Certificate is provided which assures accuracy from our ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Individual Logger-Trac™ RH/Thermometers are pre-programmed with alarm values of 2°C (low) and 8°C (high) and a recording interval to allow for 30 days of recording (readings are logged every 5 minutes, 33 seconds).
Logging Duration
Sample Interval
4 days
11 seconds
7 days
19 seconds
16 days
43 seconds
30 days
1 minute 20 seconds
60 days
2 minutes 39 seconds
90 days
3 minutes 58 seconds
365 days
16 minutes 4 seconds
Accessory MaxiThermal™ Software
Cable required to program these values. Software and cable allows for the following parameters to be set by the user:
High/Low Alarm set points
Recording interval
Start Data-logging/Alarm Condition delay
User’s unit description
Time and Time zone
Temperature unit of measure (°F/°C)
Stop key enable
相关产品
