美国PE公司的Magna等离子系统是全世界第一台不需要CF4等反应刻蚀气体的等离子刻蚀系统,专用于PCB大容量行业使用,创新的技术保证了稳定可靠的刻蚀效果。
The Magna is the world’s first plasma etching system that eliminates the need for CF4 gases used by PCB manufacturers for plasma processing. The Magna sets new standards in several key areas, including faster etch times, lower power usage, and incredible process uniformity not achievable with any other system.
The Magna provides precise, uniform etching simultaneously on both sides of processed materials. The high performance, low operating costs, and environmentally-friendly usage makes the Magna a significant breakthrough in plasma etching technology.
When circuit boards are manufactured, layers of copper are often sandwiched between layers of polyimide or epoxy (FR4). When these circuit boards are drilled for wire bonding or IC chip installation, the polyimide or epoxy will smear on the copper which can interfere with the electrical connection.
The Magna PCB etching system was designed to remove these contaminants as well as thoroughly clean the copper to allow reliable electrical connections. A clean and smear-free hole is essential to reliably solder wire, IC chips, or other conductive material to the hole.
Plasma etch back not only cleans the residue left behind on the copper by the polyimide or FR4 epoxy by the drilling process, but it also etches away at the polyimide or epoxy material. This allows a multi-surface bonding to the solder or other conductive material.
The material in between layers of copper is etched away by the plasma, allowing solder to contact more of the copper and create a stronger and electrically less resistant connection. Etch back is often used in high grade and military applications.
The process is significantly more accurate than traditional wet chemical cleaning methods. Our plasma products prevent the use of environmentally hazardous waste chemicals and creates no hazardous waste products. This is safer for not only our environment but for lab staff as well.
To purchase a Magna, please contact us at or email us at . If you aren’t ready to purchase a Magna right away, we offer contract services. We are able to perform full functionality testing before your materials are returned to you.
All of our contract services are performed on Plasma Etch equipment by dedicated and experienced operators at our corporate headquarters in Carson City, Nevada.
Electrode Configuration
Carousel (8 panels, 24”x30”)
Advanced Electrode Design Eliminates the Need for CF4 Gases
Generator
2000W 13.56MHz Power Supply with Automatic Matching Network
Gas Control
Two 0-500cc Mass Flow Controllers with Low Gas Source Alarms
Control System
Color Touch Screen Computer
Vacuum Pump
Dry Pump/Blower Combo
Chiller for RF Network & Dry Pump Cooling
Chamber Material
6061-T6 Aluminum
Unit Dimensions
8’x6’x6’
Additional Accessories
Signal Light Tower
On-Board O2 Gas Generator Eliminates the Need for Separate Gas Supply
Packed Fume Scrubber
Process Temperature Control (Patented), 100oF to 250oF
Made in the U.S.A.
Electrical
208V @ 60 Amps, 3 Phase, 5 Wire
Compressed Air Service
80-100PSI, 0.5CFM
Cooling
Closed Loop Water Source
相关产品