少模光纤放大器
This few mode fiber Erbium doped amplifier has been developed within the MODE-GAP project. The amplifier covers C-band and is available in 3-mode (LP01, LP11a, LP11b) and 6-mode (LP01, LP11a, LP11b, LP21a, LP21b, LP02) options. Low noise figure and high gain is achievable across the full set of modes. The differential modal gain is low and flat across the wavelength range. Number of required pump ports can be defined by the user to provide individual mode group control.
Optical Parameters | Typical |
Wavelength Range | 1535 – 1560nm (C-band) |
Input Power Range | -10 to 0 dBm per mode |
Number of spatial modes | 3 or 6 |
Small Signal Gain | > 20dB |
Number of distinct pump ports | 1-4 |
Maximum Output Power | 17dBm |
Differential Modal Gain | < 4dB |
Noise Figure | < 6dB |
Input/ Output Connector | Bare fiber or FC/PC or FC/APC |
General | |
Control Electronics Dimensions | 19” Rack Unit |
Operating Voltage | 110-230 VAC |
Line Frequency | 50 to 60 Hz |
相关产品