高温高压养护釜
Introduction仪器概况
HTHP curing chamber is specifically designed in strict accordance with API Specification 10. It can imitate the high temperature and high pressure downhole condition to cure the cement under imitated condition form standard samples (2”×2”×2”) for comprehensive strength testing.
高温高压养护釜是严格按照美国石油协会(API)规范10的要求设计制造的,它能模拟井下高温高压条件,使水泥浆在模拟井下条件下养护一定时间,形成标准的水泥石模块(标准为2*2*2立方英寸),提供给强度测试仪,进行抗压强度试验的仪器。
Features 特点
Vessel assembly each includes: 釜体总成包括
l The sample room with heating and cooling jacket
带有加热和冷却夹套的样品室
l The controller of curing sample temperature
养护样品温度控制器
l With pressure control system
可带有压力控制系统
l Accurate control the temperature of the cement sample
可精确控制水泥试样的温度
l Temperature controller , digital display
温度程序控制、数字显示
l Multiple section temperature control
可实现多段升温控制
l Automatic pressure limiting
可自动限压
l High wattage heater
大功率加热器
l Metal-to-metal sealing
金属高压密封
l Firm and durable ,easy to use
坚固耐用,使用方便
l Stainless steel enclosure
不锈钢外壳
l Cooling jacket for Vessel
釜体带冷却管
l Temperature uniformity in the Vessel to ensure uniform curing of the sample
釜体内温度均匀保障试样养护均匀
Model: TG-7370D
1220*660*1440mm (780kg)
HTHP Curing Chamber/高温高压养护釜
Configurations主要配置
a. Booster Pump compression ratio 100:1
增压泵 压缩比100:1
b. Valve 阀门
c. Program Controller 程序控制器
d. Switch 开关
e. Air-operated Parts气动部件
f. High-pressure Connector高压连接件
g. Low-pressure Connector低压连接件
h. Rupture safety 安全爆破片
i. The main body 仪器主机
j. Vessel 釜体
Specifications 性能参数
Maximum Temperature: 370℃
最高工作温度:370℃
Maximum Pressure: 40MPa
最高工作压力:40MPa
Heater Power: 4.5KW
加热器功率:4.5KW
Input Voltage: 220V
输入电压:220V
Input Maximum Power: 9KW
输入最大功率:9KW
Environment Temperature: 10~40℃
环境温度:10~40℃
Compressed Air: 0.8MPa
压缩空气:0.8MPa
Cooling Water: 0.2~0.6MPa
冷却水:0.2~0.6MPa
1年
是
有
3人以内
1年1次
免费维修更换配件
在48小时到达现场进行维修
相关产品