国产
FPA0640P15F-17-C
Near-Infrared(0.9-1.7μm)640x512 | InGaAs Focal Plane Array | |
FEATURES | APPLICATIONS | |
● Near-Infrared lmaging | ||
0.9μm-1.7μm Spectral Range | ● Covert Surveillance | |
Light Weight 64ClCC Package | ● Semiconductor/Solar Panel Inspection | |
Typical Pixel Operability >99.9% | ● Medical Science and Biology | |
Quantum Efficiency>70% | ● Fiberoptic Assembly and Testing | |
Room Temperature Operation | ● See through Fog/Smoke | |
Built-in Temperature Sensor | ●lce/SlushMoisture Mapping | |
● Industrial Thermal Imaging | ||
2,4 or 8 Outputs with up to 18MHz Pixel Rate Windowing Capability | ● Astronomy and Scientific | |
GENERAL DESCRIPTIONS
PARAMETER | UNIT | VALUE |
Sensor Technology | Planar InGaAs PIN | |
Spectral Range | μm | 0.9-1.7 |
Actual Pixel Array | 640x512 | |
Effectiye Pixel Array | 636x508 | |
Pixel Pitch | um | 15 |
lmag e Size | mm | 9.6x7.68 |
Package Type | 64-pin CergmicLCo | |
Package Size LxWxT | mm | 18x18x2 |
Weigh | g | 1.7 |
SPECIFICATIONS (TMB=22 ℃)
Parameter | Unit | Typical Value | Conditions | |
1.2Dark Current | fA (=6250 e/s) | ≤30 | Photopixel Biased @-0.5V Mean Value | |
.2Quantum Efficiency*Fill Factor (QEFF) | % | ≥70 | λ=1.0μm-1.6μm | |
2Response Nonuniformity | % | ≤5 | At 50%Full Well | |
.2Response Nonlinearity | % | ≤2 | 15%-85%Well Occupation Range | |
3Charge Capacity | @High Gain,46.2 μV/e | Me | 0.041 | ROIC Specifications |
@Mid Gain,16.2 μV/e | 0.118 | |||
@Low Gain,1.39μV/e | 1.380 | |||
Readout Noise Floor | e | <35 | In High Gain Mode | |
2Noise-Equivalent Irradiance (NEI) | ph#/cm²s | ≤2.1x10C | In High Gain Mode Integration Time =3.33 ms λ=1.55μm | |
2Mean Detectivity | cm-VHz/W | ≥3.0x1012 | ||
Output Swing | V | 2.25 | ||
2Minimum Integration Period | μs | <1 | ||
1,4Pixel Operability | % | ≥99.9 | Percentage of Pixels with QEFF Deviation within±20%*(QEFF Mean). |
1.These items are defined for central effective pixel array (636x508).Their values correspond to default operation conditions.
2.Contact us for further information.
3.These values are ROIC-version dependent.
4.FPA with pixel operabiity lower than 99.9%(<99.9%)is categorized as a testgrade device,which,if available in stock can be provided on request.
ABSOLUTE MAXIMUM RATINGS
Parameter | Unit | Min. | Max |
Operating Temperature | ℃ | -40 | +71 |
5Storage Temperature | ℃ | -40 | +80 |
Power Consumption | mW | 200 |
5.In non-condensing environment
PACKAGE OUTLINE (Unit:mm)
Note:CLPT can provide lidless version per customer requests.Lidless FPA can reap the benefits from less window interference and the adoption of proximate optical filter(s).
EXAMPLE CURVES
Histograms
Dark Current lo(fA)
of Dark Condition
Dark Output (%Full Well)
Histograms of llluminated Condition
QEFF (%)
QEFF Spectrum
Wavelength (nm)
Output Linearity
TINT (ms)
Note:The example curves are subject to change without notice.
40天
1年
安装调试现场免费培训
到货后3天内
1小时内
是
3天内
相关产品