型号: | Solaris CCD Plus |
产地: | 意大利 |
品牌: | GNR |
评分: |
|
仪器性能特点及技术参数
Technical Data of GNR SCP
GNR SCP(Solaris CCD Plus)火花直读光谱仪是一台方便使用和高精度的仪器。
由于结构紧凑体积小巧、性能高Solaris CCD Plus可以安放在办公室、实验室、仓库、生产线等任何工作场所。Solaris CCD Plus可以有不同的配置,用于分析不同种类的黑色和有色金属及合金。
GNR SCP配备:
1. 光学系统 Optical system
2. 谱线 Optical lines
3. 控制、电子采集和数据读出系统 Control, Acquisition Electronics and read out system
4. 火花源 Spark Source
5. 火花台Spark Stand
6. 软件 Software
7. 控制中心:电脑 Control station : computer
组成部分的描述:
DESCRIPTION OF THE COMPONENTS:
1. 光学系统 OPTICAL SYSTEM
v 多块高性能CCD检测器系统,根据应用需要最多达16块CCD检测器
Multi High Resolution CCD Multi detectors (Charge Coupled Device) system with up to 16 CCD solid state detectors depending on the application
v 每块CCD 3,648 像素
Each CCD has 3,648 active elements (pixels equivalent)
v 58,368 像素的分辨率(16 x 3,648 像素)
Resolution of full range 58,368 active elements (pixels) (16 x 3,648 pixels)
v 高性能全息衍射光栅,光栅刻线3600 条/mm
High luminosity holographic grating with 3600 grooves per mm
v 温度稳定系统
Stabilized against fluctuations in temperature
v 采用特殊材料应对漂移
Special material for drift free
v 焦距:500 mm
Focal length 500 mm for all optical systems
v 谱线波长:130 - 800 nm由衍射光栅的选择决定。光栅的选择由制造商根据分析元素和分析程序来决定
Spectral optical wavelength 130 – 800 nm depending on selected diffraction grating. Grating selection is made by manufacturer depending on analytical programs and elements
v 全光学系统自动描迹
Automatic profiling full optical system
v 密闭的真空光学室可以避免灰尘、光线的干扰
Vacuum tight optical chamber sealed against light and dust
2. 谱线OPTICAL LINES
v SCP覆盖了全元素分析范围,可根据具体需要分析相应的元素
SCP can be equipped with all the needed spectral lines basing on analytical programs requested
v 光学系统包括固态检测器能够测量样品所发出的全谱
Optical system includes full range multi-chanel CCDs solid state detectors able to measure the whole optical spectra emitted by all elements in the samples
v 并且为将来可能的升级,增加分析线(元素)方便
It’s always possible to integrate new spectral lines (elements) for future upgrade
v 可现场增加分析程序
Possible on site addition of analytical programs
3. 控制、电子采集和数据读出系统CONTROL, ACQUISITION ELECTRONICS and READ OUT
v 电子系统具有微处理器控制的多通道积分和数据系统采集功能
Electronic system with integrators multi-channels and Data System Acquisition PC controlled by microprocessor
v 高速16位模数转换器
High speed 16 Bit ADC
v ISP混合信号Flash微控制器100MHz
Mixed Signal ISP Flash MCU 100 MHz
v 多种连接源
Serial Source Interface
v 高速读出及高速USB借口支持快速数据控制与处理系统
High speed readout with high speed interface USB for fast data processing and controlling the system
v 最多16块CCD模块,由制造商根据应用情况选择
Up to 16 input for CCD modules. CCD modules selected by manufacturer
4. 火花源SPARK SOURCE
v 全自动控制火花源
Full automatic controlled source
v 半导体控制放电激发
Solid state spark source semiconductor controlled.
v 1 到 100 A等离子体电流
Plasma current from 1 to 100 A
v 放电参数由密码保护
The discharge parameters are protected by password
v 特别的分析要求可有不同的激发参数
Variable discharge parameters for individual analytical tasks
v 火花光源放电稳定,不受供电系统波动的影响
The spark source is stabilized against variations of the power supply
v 激发参数由激发线和分析程序标定和控制
Excitation parameters configurated and controlled according to excitation lines and analytical programs
v 火花源可有多种参数设置
Spark source with variable parameters
v 火花频率: 200 到 to 1000 Hz (可控)
Spark Frequency: 200 up to 1000 Hz (controllable)
v 火花持续时间 10-10000 us (可控)
Spark time 10-10000 us (controllable)
5. 火花台SPARK STAND
v 开放式的火花台可以分析测试重达20Kg的各种形状的样品
The open universal spark stand allows to analyse samples up to 20 Kg and suitable for samples in different forms
v 电极易于拆卸维护
The electrode is easily removable for maintenance
v 氩气吹扫火花台,低氩气消耗
Argon flushed spark stand with minimum consumption of Argon
v 使用便捷的样品夹支持快速样品更换
Quick change with simple designed sample clamp for fast sample throughput
v 不同样品的适配器可满足各种样品的需求(可选)
Small adapters for different samples are also available for various kind of samples(options)
6. 软件 : 分析软件、校正软件、统计功能
SOFTWARES: ANALYTICAL SOFTWARE, CALIBRATION SOFTWARE AND STATISTIC FUNCTION
计算每种元素的校正曲线需考虑到各种基体(参考线)。
For calculation of calibration curves for each elements into consideration of various matrixes (references) available for the calculation of analytical results.
软件功能: Software allows for
分析校正软件:ANALYTICAL AND CALIBRATION SOFTWARE:
智能化 : 用一组标样即可完成标准化
SMARTCAL : standardisation using a single sample
便捷的用户图形界面Easy GUI ( Graphic Interface User) system
创建或修改分析程序Creation or modification analytical programs
常用的操作功能键Function keys for routine operations
可选择的输出方式 ( 强度,强度比,未校正的浓度,校正后的浓度等)
Output unit selectable (intensities, intensities ratios, uncorrected concentrations, corrected concentrations etc)
可选择的浓度单位 ( ppm, % ) Selectable concentrations units ( ppm, % )
通用标准化Global recalibration
微型标准化Mini calibration ( Type recalibration)
校正元素间的干扰Correction of inter elemental interferences
自动标准化Standard deviation and relative standard deviation functions
标准偏差和相对标准偏差功能Repeat or reject one or more discharges
合金类型鉴定(UNI, ISO, DIN, EN, ASTM, JIS, BS, 等.)
Determination type of alloy (quality name) according to the requested norm (UNI, ISO, DIN, EN, ASTM, JIS, BS, etc.)
标样库Standards library
国际标准物质库International norms library
牌号鉴定Quality identification
支持C当量或其他参数的计算
Calculation of Carbon equivalence or any other parameter consequent to the analysis
可标记超出工作曲线范围的元素分析结果Signalling of out prefixed range elements
具有根据分析时间或激发次数自动再校正功能
Possibility of automatic signal for recalibration depending on time or on spark number
统计功能软件:STATISTIC SOFTWARE functions:
统计计算Statistic calculation
可打印所有激发结果或是最多100次的激发平均结果,及其标准偏差和相对标准偏差
Printing of all discharges or only the average of up more than 100 discharges, standard deviation and relative standard deviation
硬盘存储数据便于今后的研究分析
Filing on Hard Disk of all data with possibility of researching various keys
可连接外部计算机或中心系统Connection to external computers or central/server system
· 综合特性:General properties:
* 32位应用软件Software with 32bit application
* 字体、字体大小设定 Fonts, font-sized setup up to setting on screen
* 日期/时间格式基于Windows设置Date/time formats compatible with Windows setup
* 多种输出功能或对话操作的快捷图标
Various icons for quick access to output functions or dialogues
* 下拉式菜单操作文档、筛选、观察Drop lists for File, Filter, View
* 元素数量不受限unlimited number of elements
* 样品识别域数量不受限unlimited number of sample id fields
* 帮助文件Help task
* 手动转换 MS-Word 文件 or PDF文件 (Acrobat Reader)
Manual as MS-Word file or PDF (Acrobat Reader)
* 全自动控制,自动诊断功能Fully automatic control and automatic diagnostic function
数据库:Database:
* 输入、输出 Import, Export
* 仪器与通信间的接口Communication & Instrument interfacing
* 文件的共享、传输File for sharing, transfering
* 输出文件、统计程序Export to files, statistic programs
文档:Documentation:
* 标准输出、页面设置logo或信头功能
Standard print, page set-up with logo or letter head functions
* 打印设置、打印预览Printer set-up, Print Preview
* 数据打印、工作曲线打印Data printing, curves printing
分析管理:Analyses management:
* 数据库管理和控制Database management and controller
* 多窗口支持多任务工作Multiwindows for multi tasks working
* 不限制察看分析结果列表的数目Unlimited number of views for analyses table
* 所有数据库域的查询功能Search function for all data fields in view
* 分析的编辑功能Edit function for analyses
* 分选结果时发出“滴滴”声Click’n’mark analyses selection
* 元素、大小、小数点的显示格式Display formats with elements, forms, dimensions, decimals
* 分析结果复制功能Copy function
* 结果的单位和小数点选择(不限数目)Units & dimensions (unlimited number)
* 手动分析结果输入和样品鉴别Manual analysis input and sample identification
* 可选的样品码输入使用条形码阅读器Optional sample code imput using bar code reader
* 所有样品识别和元素域的操作一目了然Transparent access thru all sample-ids & element fields
* 适用于所有分析结果的查询和输出Applicable for all analyses views and outputs
* 牌号数据库Quality database
* 牌号控制功能Quality control function
* 牌号识别功能Quality identification
* 分析结果列表中牌号控制的显示Display of quality control in the analyses table
* 收到的已存在牌号的自动检测Automatically check of received qualities for existence
* 展公式编辑功能Formula editor with extended possibilities
* 自定义公式编辑Formula calculation
* 数字统计功能(序号, 加合, 平均, 绝对/相对 标准偏差, 最大, 最小, 范围)
Numeric statistics (no., sum, average, abs./rel std dev., min, max, range)
* 步宏编辑Macro programs, with asynchronous execution
* 异步宏排序Macro sequences, with asynchronous execution
* 自动项目或预定宏执行的任务服务器
Job server for automatic event, or scheduled macro execution
7. 控制站:电脑CONTROL STATION : PERSONAL COMPUTER
建议配置:
电脑 :笔记本或台式机(可选)需安装并且确认软件的兼容性。
CPU奔腾酷睿2、 内存 2GB
硬盘 >320 GB 7.200转 、 DVD—CD-DVDRW-CDRW
显示器LCD 17” 或 19” TFT
Windows XP操作系统
网络、 显卡, USB接口…
键盘、鼠标
打印机 : 彩色惠普 Deskjet 打印机,或同等产品
8. 尺寸 : DIMENSIONS
尺寸(Dimension): P95 x L40 x H65 cm
重量(Weight) : 约 100 Kg
9. 电源 : POWER SUPPLY :
110/220V +/- 10%、 单相(single phase)、 50/60 Hz
16 A、 < 1.0 KVA
10. 其他 : OTHER CONDITIONS :
工作温度范围(Working temperature range): +10°C - +35°C
湿度范围(Working humidity): 15 – 85%
氩气溯流压力(Argon upstream pressure) : ~200 bar
氩气输入压力(Argon inlet pressure) : ~3.5 bar
氩气质量(Argon quality) (min.) : 5.0 (99.999% 氩)
氩气流量(Argon flow rates)
* 待机(Stand-by) : 0.001l/小时
* 常流量(Constant flow) : 0.5 l/小时
* 分析流量(Analytical flow) : 180l/小时 (3lt/分析)
相关产品
真空泵隔音罩
X荧光光谱仪制样设备电热熔样炉(熔片机)
电加热X荧光光谱仪专用全自动熔样机
锐光RGF-6300原子荧光光度计
SPECTRO xSORT德国斯派克手持式荧光光谱仪
ZXTA-20双极反渗透实验室超纯水机
RGF8780原子荧光光度计
RGF7800原子荧光光度计
RGF6200A原子荧光光度计
AFS-9560全自动四灯位双顺序注射式蒸汽发生原子荧光光度计四灯位双注射泵进样
AFS-9730全自动双道原子荧光光度计双灯位注射泵进样
AFS-230E全自动双道氢化物发生原子荧光光度计全自动蠕动泵进样
LC-AFS9700液相色谱原子荧光联用仪双灯位注射泵进样
LC-AFS-9780液相色谱原子荧光联用仪四灯位注射泵进样
LC-AFS 9600 液相色谱原子荧光联用仪半自动蠕动泵进样
关注
拨打电话
留言咨询