480-450.008耶拿镉Cd空心阴极灯（原装）

北京龙天韬略科技有限公司代理德国耶拿Analytik Jena原子吸收光谱耗材配件、TOC分析仪/总有机碳分析仪耗材、有机元素分析仪耗材、碳硫分析仪（红外碳硫仪）耗材配件、卤素分析仪/水质卤素分析仪耗材。

耶拿contrAA800连续光源原子吸收光谱仪

耶拿contrAA® 600连续光源 石墨炉原子吸收光谱仪

耶拿ZEEnit®650P高级石墨炉原子吸收光谱仪

耶拿ZEEnit®700P火焰石墨炉原子吸收光谱仪

耶拿contrAA®700连续光源 火焰/石墨炉原子吸收光谱仪

耶拿novAA®350全自动火焰原子吸收光谱仪

耶拿contrAA®300连续光源 火焰原子吸收光谱仪

耶拿novAA®400P智能火焰－石墨炉原子吸收光谱仪

德国耶拿multi N/C ®2100 TOC

德国耶拿 multi N/C® 3100 TOC

德国耶拿multi EA® 5000碳、氮、硫、氯 元素分析仪

德国耶拿 multi EA® S 5000碳、氮、硫、氯 元素分析仪

德国耶拿multi EA® 4000碳、硫、氯 元素分析仪

德国耶拿multi X® 2500总有机卤素分析仪

原装空心阴极灯/石墨管/雾化器/样品杯/进样针/进样器/进样垫/注射器/TOC燃烧管等耗材配件，常用耗材配件现货供应，订货货期短，到货快，原装正品，质量保证。

部件号如下：

配套使用注射器/进样针/进样器/进样针

适用于德国耶拿EA3100和EA5000硫氮氯分析仪器现货供应 价格优惠 货号如下：

1、产品货号402-886.311

产品描述Syringe graduated 500 μl with removable needle for manual injection

2、产品货号402-889.589

产品描述Syringe 10 μl, for Autoinjector, with removable needle

3、产品货号402-889.590

产品描述Syringe 20 μl, for Autoinjector, with removable needle

4、产品货号402-889.591

产品描述Syringe 40 μl, for Autoinjector, with removable needle

5、产品货号402-889.592

产品描述Syringe 100 μl, for Autoinjector, with removable needle

6、产品货号402-823.080

产品描述100μl syringe H ?8 RN 0,64(G23s)c51

7、产品货号402-886.305

产品描述500μl SYR H ?8Vent 1/4"-28 RN 1,0x0,7c51

8、产品货号402-823.056

产品描述Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

9、产品货号402-823.106

产品描述Syringe 20 μl, for Autoinjector, with removable needle

10、产品货号402-886.306

产品描述Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

11、产品货号402-889.186

产品描述Removable special needles, set of 3 pieces

Consumables multi EA 5000

effective from 01.01.2010

 PriorityOrder numberDescription

Consumables general

402-889.527Auto-Protection valve assembly, complete

no picture available

 B402-889.091Lids for sample vials, 2 ml, set of 500 pieces

402-889.652Flow test kit

no picture available

A402-889.182Wires for cleaning syringe needles, set of 10 pieces

402-007.513FAST connector, 1 piece

(adaptor angeled for gas tubings, black)

402-801.317Fuse for furnace unit

T 10 A H, 20 mm

 402-820.044Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece

402-889.510Multi purpose combustion tube

B402-825.045Tweezers, straight, truncated

B402-889.092Sample vials, 2 ml, set of 100 pieces

(for sample rack with 112 positions)

402-889.558PTFE filter plate, d = 25 mm  (Auto protection replacement

filter)

Set of 5 pieces

402-820.129Oxygen and argon gas supply tubing

FEP, OD 6 mm (sold by meter), 1 m

A402-889.306Screw cap with hole, GL 18

402-889.557Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces

402-889.583Special sealing 12 mm

(FAST connector at outlet of multi purpose combustion tube)

402-822.118Heat resistent gloves, 1 pair

Sampling modules

MMS 5000

402-812.374Replacement screw

(mounting of autosampler on the basic unit/ ABD)

A402-823.079Removable needles for 50 and 100 μl syringes, set of 3 pieces

402-886.248Waste hose

A402-889.206Septum for rinsing vessel

402-889.533Syringe 50 μl, with removable needle, without markings

 402-889.534Syringe 100 μl, with removable needle, without markings  402-889.547Gripper for sample boats

Autoinjector

402-889.589Syringe 10 μl, for Autoinjector, with removable needle

recommended for higher element concentrations and systems with carbon module

402-889.592Syringe 100 μl, for Autoinjector, with removable needle

402-889.590Syringe 20 μl, for Autoinjector, with removable needle

recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)

402-889.591Syringe 40 μl, for Autoinjector, with removable needle

recommended as standard syringe for N/S systems

A402-889.186Removable special needles, set of 3 pieces

Manual Boat Drive - MBD

no picture

available

402-815.839Sealing for sample port MBD

402-889.671Feed  tube for MBD

402-889.672Hook for MBD

402-889.670MBD coupling tube, glass

402-889.674Quartz boat, 40 mm x 9 mm, set of 10 pieces

 402-889.560Set of sealing elements horizontal 402-889.673Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Automatic boat drive - ABD

402-889.551ABD coupling tube, glass

402-886.236Sealing for sample port ABD

A402-881.028Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing

A402-889.073Feed tube, for MVS shunt/ABD

A402-889.066Hook, for MVS shunt/ABD

suitable from MVS serial number  509 046 and higher

402-815.838O-ring 14 mm x 4 mm for ABD

402-889.674Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560Set of sealing elements horizontal

A402-889.050Septum; 12.5 mm; set of 5 pieces

 402-889.673Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

A402-889.039Adsorption material, set of 3 pieces

Gas Sampling System - GSS

B402-889.148Replacement septum for gas sampling bag 10 l, 1 piece

402-820.057Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123Ferrule for injection needle, vertical operation, 1 piece

B402-889.147Gas sampling bag 10 l for GSS and GSS type C, 1 piece

A402-889.180Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

no picture

available

 402-889.423Septum perforated for special needle PEEK in horizontal operation mode

A402-890.018Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

LPG Module and GSS/LPG combi module

402-889.439Bubble vessel

402-820.057Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123Ferrule for injection needle, vertical operation, 1 piece

A402-889.180Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

A402-815.058Lab-type screw joint D 3.2 - GL 14, complete (red)

multi EA 5000: for bubble vessel

A402-881.116O-ring, i.d. = 6 mm x 3 mm

multi EA 5000: for screw cap GL 14 bubble vessel

no picture

available

 402-889.423Septum perforated for special needle PEEK in horizontal operation mode

A402-890.018Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

Detection

Sulfur / nitrogen / carbon detection

no picture

available

402-889.061Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

no picture

available

 402-889.060Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l  B402-889.070Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

 B402-889.167Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B402-889.164Sulfur Calibration Kit (100 - 500 mg/l)

B402-889.069Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B402-889.165Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B402-889.162Nitrogen Calibration Kit (100 - 500 mg/l)

A402-823.048Membrane dryer

B402-815.030O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A402-889.313Absorber tube for  Sulfur coulometer, glass

402-820.110Connecting hose 1/8", (sold by meter), 1m

A402-889.302Diaphragma for titration cell of Sulfur coulometer

A402-889.308Sealing for screw cap with hole, GL 32, Sulfur coulometer

A402-889.309Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307Sealing for screw cap with hole, GL 18, Sulfur coulometer

A402-889.311Gas introduction tube for titration cell of Sulfur coulometer, glass

A402-520.137Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A402-889.301Indicator electrode for titration cell of Sulfur coulometer

A402-889.303Cathode  for titration cell of Sulfur coulometer

A402-889.310Stirrer bar, titration cell, Sulfur coulometer

 402-884.015Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

A402-889.306Screw cap with hole, GL 18

A402-889.304Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

A402-889.314Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300Titration cell for Sulfur coulometer, glass

A402-889.312Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B402-886.311Syringe graduated 500 μl with removable needle for manual injection

B402-885.019Halogen absorber, complete with U-tube

 402-810.050Halogen absorber filling (copper- and brass wool)

 A402-885.017High-temperature mat, set of 3 pieces

A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

402-889.657Condensation coil

no picture available

 B402-810.059Special catalyst platinum, sufficient for 5 refills

A402-810.048Special catalyst platinum, one refill

B402-886.318Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A402-884.005Pump hose for peristaltic pump, waste

A402-881.006Quartz glass cullet, coarse grains, packet of 80 g

A402-825.044Quartz wool, 1 packet

402-889.659Septum TIC vessel

no picture available

402-889.658Septum combustion tube

no picture available

402-881.245Set of TC prefilter and water trap

402-889.594Syringe 250 μl with vent and removable needle

(for autosampler)

402-889.593Syringe 500 μl with vent and removable needle

(for autosampler)

no picture

available

402-889.656TIC vessel

A402-825.150U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

no picture

available

402-889.655Combustion tube

Chlorine Detection

402-815.831Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549Connecting part (metal) for  gas transfer line

with outside thread

402-825.123Beaker for sulfuric acid vessel

402-889.561Replacement hose for heated gas transfer line

402-820.053Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055Ferrule for screw joint

gas transfer line with inside thread

402-889.559Gas transfer hose

no picture

available

no picture

available

B402-889.071Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B402-889.166Chlorine Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B402-889.163Chlorine Calibration Kit (100 - 500 mg/l)

A402-520.177ferrule set,  1/4" TFE

402-30003Ferrule set,  1/8" PTFE

402-825.124Petri dish for sulfuric acid vessel

402-889.569Tubing inside sulfuric acid vessel with ferrule

402-889.508sulfuric acid vessel with outlet

402-889.507Safety cowl for the sulfuric acid tank

402-825.108Funnel for sulfuric acid vessel

402-889.573Connector sulfuric acid vessel

A402-30031Swagelok screw fitting, 1/4" onto 1/8", PTFE

Chlorine detection with chlorine module high sensitive

 B402-890.007Storage vessel for sensor electrode

A402-889.085Mounting to connect suction extractor at workplace, NS

14.5 brown glass

402-99998preamplifier for sensor electrode

A402-889.123Gas introduction tube

A402-889.124Set of rubber plugs; 1 x NS14, 1 x NS7

A402-889.112Internal electrolyte sensor electrode, 50 ml

A402-815.023Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

A402-889.006Platinum electrode

A402-889.184Electrolyte bridge

B402-889.110Salt solution to make up 100 ml electrolyte

 A402-889.002Sensor electrode   402-889.536Silver electrode

Chlorine detection with titration cells sensitive and high concentration

402-889.538Storage vessel for combination electrode

B402-880.605Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

 402-890.610Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

A402-880.211Combination electrode (ceramic)

A402-815.022Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

 402-889.673Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.