702-A63.623 Seal rings for siphon and mixing compartment

 公司为国内外广大用户专业提供原子吸收光谱仪用各种型号石墨锥、石墨管、石墨平台片；气体分析仪器用各型号石墨坩埚；油料光谱分析仪用各型号石墨电极；原子吸收光谱仪用各型号单元素空心阴极灯、多元素复合空心阴极灯、自吸扣背景空心阴极灯、高性能空心阴极灯、氘灯等分析光源；高性能原子荧光灯；原子吸收各型号金属套玻璃高效雾化器、ICP/ICP-MS雾化器、ICP/ICP-MS雾化室、ICP/ICP-MS矩管、ICP/ICP-MS采样锥截取锥；色谱柱、空心阴极灯电源、空心阴极灯激活器、高性能空心阴极灯电流分配器、比色皿、标准物质、进样杯等分析测试仪器耗材配件，常规型号现货供应，特殊型号可定制。

B402-889.164Sulfur Calibration Kit (100 - 500 mg/l)

B402-889.069Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B402-889.165Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B402-889.162Nitrogen Calibration Kit (100 - 500 mg/l)

A402-823.048Membrane dryer

B402-815.030O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A402-889.313Absorber tube for  Sulfur coulometer, glass

402-820.110Connecting hose 1/8", (sold by meter), 1m

A402-889.302Diaphragma for titration cell of Sulfur coulometer

A402-889.308Sealing for screw cap with hole, GL 32, Sulfur coulometer

A402-889.309Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307Sealing for screw cap with hole, GL 18, Sulfur coulometer

A402-889.311Gas introduction tube for titration cell of Sulfur coulometer, glass

A402-520.137Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A402-889.301Indicator electrode for titration cell of Sulfur coulometer

A402-889.303Cathode  for titration cell of Sulfur coulometer

A402-889.310Stirrer bar, titration cell, Sulfur coulometer

 402-884.015Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

A402-889.306Screw cap with hole, GL 18

A402-889.304Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

A402-889.314Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300Titration cell for Sulfur coulometer, glass

A402-889.312Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B402-886.311Syringe graduated 500 μl with removable needle for manual injection

B402-885.019Halogen absorber, complete with U-tube

 402-810.050Halogen absorber filling (copper- and brass wool)

 A402-885.017High-temperature mat, set of 3 pieces

A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

402-889.657Condensation coil

no picture available

 B402-810.059Special catalyst platinum, sufficient for 5 refills

A402-810.048Special catalyst platinum, one refill

B402-886.318Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A402-884.005Pump hose for peristaltic pump, waste

A402-881.006Quartz glass cullet, coarse grains, packet of 80 g

A402-825.044Quartz wool, 1 packet

402-889.659Septum TIC vessel

no picture available

402-889.658Septum combustion tube

no picture available

402-881.245Set of TC prefilter and water trap

402-889.594Syringe 250 μl with vent and removable needle

(for autosampler)

402-889.593Syringe 500 μl with vent and removable needle