6890N Includes:
-
7683 Autosampler with Injector Tower
-
Computer Loaded with Chemstation Software
· Injector: Split-splitless (standard)
· Oven temperature: Ambient +4 °C– 450 °C
· Oven ramps/plateaus: 6/7
· Electronic pneumatic control (EPC): Auto pressure regulation for split/splitless, septum purge
· Carrier gas control modes: Constant pressure and flow modes; pressure and flow Programmable
5975VL/SD Mass Spectrometer Specifications:
· Mode (standard) EI
· Ion source type: Noncoated inert EI source
· Mass filter: Monolithic hyperbolic quadrupole
· Maximum mass: 1050 u
· Detector: EM with replaceable horn
· Scan rate (electronic): Up to 10,000 amu/s
· Pumping system: 70 L/s or 262 L/s turbomolecular pump with 2.5 m3/h mechanical pump
Data System
· eMethods: Transfer methods between 5975 and 5973 Series MSDs
· Simultaneous MS and GC: Four signals (up to two MS) detector data acquisitions
· SIM/Scan: Automated SIM setup and synchronous SIM/scan operation
· Application autotunes: One-click autotune for BFB, DFTPP
Overview:
-
Laboratories worldwide are looking for a GC solution that delivers reliability, performance, and reproducible results, And nothing produces these benefits like the Agilent 6890N Network GC. By integrating leading-edge technologies with an emphasis on quality manufacturing processes, the 6890N will bring a work ethic to your laboratory that’s matched only by your own.
Accomplish more with networking abilities
-
Lets you share business and scientific data easily within a laboratory and across sites for fast and informed decision making.
-
Incorporates local area network (LAN) technology as a standard feature, which makes it easy to link communication and control of multiple analytical instruments. With networking, you can work smarter, faster, and more economically.
Increased Laboratory Efficiency
-
Clock-time programming allows you to set up runs for unattended operation whenever you want. The system can be ready to work when you get to your laboratory. Pre-run and post-run commands automatically prepare the system for the next sample.
Decreased Calibration Time
-
You can manually enter existing calibration data and make a run with just one standard peak. The system can normalize the calibration table for you, allowing you to cut calibration time and avoid re-running your calibration standards.
High Sample Throughput
-
The 6890N network GC system is already set up for the Agilent 7683 automatic liquid sampler, enabling fast and easy installation. Single or dual injectors, equipped with either an 8-sample turret or a 100-vial sample tray, allow unattended operation. Using the 11-vial transfer turret with the tray and the solvent saving mode, you have enough solvent to run unattended eight times longer than before.
Minimal Rework
-
The Agilent 6890N network GC system is the only GC system that automatically selects the optimum pressure-control mode for split and splitless analyses. Forward-pressure control is best for splitless injections. Along with a large inlet liner volume and pressure-pulse operation, this mode reduces discrimination, sample degradation, and sample loss caused by liner overload while maximizing sensitivity. For split injections, the system automatically selects back-pressure control for linear split ratios over the entire usable split-ratio range and over wide column flow and pressure ranges. This reduces sample preparation and increases reproducibility and accuracy. Automatic switching between forward-and back-pressure modes yields optimal results in less time and with less effort.
5975 Features:
-
Inert ion source—now programmable up to 350°C—delivers enhanced response for active compounds and late eluters
-
Proprietary hyperbolic quadrupole enhances performance up to 1050 u; the unique stability of the quartz monolith allows the analyzer to be heated to 200°C to eliminate contamination commonly seen at lower temperatures
-
Triple-Axis HED-EM Detector provides the market’s highest signal-to-noise specification (1 pg OFN, 400:1)
-
Trace Ion Detection and the second generation of Deconvolution Reporting Software (DRS) accurately identify and quantify trace components that coelute with other analytes or matrix peaks
-
Synchronous SIM/Scan mode lets you selectively monitor for ions of interest with high sensitivity SIM while simultaneously acquiring library-searchable scan data
-
Safe operation with low cost, hydrogen carrier gas—with sensitivity greater than most other GC/MS systems
-
All ionization modes (PCI, NCI and EI) in one automated sequence using the standard Cl source; AutoCI feature makes CI as easy as EI
-
High performance and entry level models that are perfectly complemented by the Agilent 7890A GC, 6890 GC, and 6850 GC
-
MSD Productivity ChemStation for most laboratories and MSD Security ChemStation for laboratories adhering to FDA’s 21 CFR Part 11 guidelines
气质联用仪信息由天津阿尔塔科技有限公司为您提供,如您想了解更多关于气质联用仪报价、型号、参数等信息, 欢迎来电或留言咨询。除供应气质联用仪外,天津阿尔塔科技有限公司还可为您提供其他等产品, 公司有专业的客户服务团队,是您值得信赖的合作伙伴。