供货周期: | 现货 |
品牌: | 完美光子 |
Terahertz太赫兹线栅起偏器
筱晓光子技术独家代理英国Thomas Keating的THZ太赫兹线栅起偏器,我们根据客户的尺寸,线栅尺度进行定制。欢迎前来定制咨询
Our photolithographic polarisers are designed for the higher frequency range (i.e. above 3 THz) where free-standing polarisers become less efficient. They are commonly used in polarising FT spectrometers for the far infrared region and in polarisation sensitive receivers such as the higher frequency bands of ALMA. They have also been qualified for use in long-life space-borne projects such as Cassini.
A pattern of thin parallel lines is created in metal on the surface of an ultra-thin polymeric substrate. As a consequence of their structure and of the method used to construct them, these polarisers must be circular and are usually mounted in stainless steel support frames.
The support substrate is usually 0.9 um or 1.5 um thick Mylar, and the metal 'wires' are copper or gold.
The polarisers are mounted in their support frames by means of a press, and each frame design requires pressing tools. We therefore offer a range of standard polariser support frame sizes. Special sizes, up to the maxima indicated in the table below, are still available but costs will include the manufacture of special press tools.
We have a range of patterns available with dimensions as follows:
Polarisers are optical components which convert unpolarised radiation into orthogonal linearly polarised components.
We offer two distinct devices for operation throughout the millimetre and far infrared spectral region and at both ambient and cryogenic temperatures.
Wire grid polarisers are suitable at frequencies below 3 THz; wire is wound across a supporting metal frame and then glued into place. Wire diameters as low as 5 um are available, and we recommend this relatively low-cost option for frequencies up to 3 THz. Diameters up to 500 mm are possible. More information can be found below.
At higher frequencies wire grid polarisers become less efficient. For these frequencies we offer lithographic polarisers in which thin metal patterns are deposited onto ultra-thin polymeric substrates. Pattern repeat distances of 2um and 10um are standards and these are available in diameters up to approximately 200 mm. See below for further details.
Wire grid polarisers are offered using wire diameters from 5 um upwards. Our computer-controlled grid-winding machine weighs more than one tonne and is capable of winding grids up to 500 mm in diameter. The photograph shows one of the larger wire grid polarisers we have made to date – the winding of a pair like this used more than 6km of wire.
Wire is wound across a supporting metal frame and then glued in place (often sandwiched between two frame halves).
相关产品
Golay Cell THZ太赫兹高莱盒光声探测器 (金刚石窗片 可见光到THz 0.4~8000 um )
WinCamD-LCM-NE 近红外增强型光斑分析仪 (355-1150nm)
INT05-N 迈克尔逊 PLX 单片干涉仪 (NIR FTIR 光谱仪的主要光学组件)
C++波段增益平坦型掺铒光纤功率放大器,24dbm,EDFA台式
超宽中红外光束质量分析仪(带M2测试,光敏面:10.8×8.7mm)
超宽中红外光束质量分析仪(不带M2测试,光敏面:15.3×12.2mm)
C波段增益平坦型掺铒光纤放大器,饱和输出功率:26dbm,保偏,FC/APC接头,模块
C波段增益平坦型掺铒光纤放大器,饱和输出功率:26dbm,保偏,FC/APC接头,台式
O波段 1310nm 电动可调光纤激光器
刻线式衍射光栅 (Ruled Gratings) 波长200-700nm 12.5 x 12.5 x 6mm
均匀光纤布拉格光栅FBG 600-2300nm
切趾-啁啾光纤布拉格光栅FBG 600-2300nm
Al2O3 标准带通滤光片 5300nm 直径50mm
中红外量子级联超快光电探测器 20GHz 4.65 µm
FTIR分束器/分光镜 Tydex 0.65-8.5um
关注
拨打电话
留言咨询