供货周期: | 现货 |
品牌: | 戴安 |
货号: | 88235 |
Dionex CarboPac SA10-4μm Column for Fast, High-Resolution Mono- and Disaccharide Analysis
The New Thermo Scientific™ Dionex™ CarboPac™ SA10-4μm Column is designed for fast chromatographic analysis of simple sugars in Biofuel and Food samples. The peak efficiencies produced by the Dionex CarboPac SA10-4μm columns produce 60 – 80% higher peak efficiencies than standard Dionex CarboPac SA10 columns, thus producing better resolution and easier peak identification and integration. The Dionex CarboPac SA10-4μm column can analyze six common sugars in Food samples in only 10 min, or eight common Biofuel mono- and disaccharides in less than 8 min.
This is the first in a series of Dionex CarboPac columns that use smaller resin particles. The smaller particles produce more efficient peaks and better resolution making analysis easier and more reliable. The smaller particles also produce higher system back pressure (over 3000 psi) under standard operating conditions and therefore can only be run using Thermo Scientific™ Dionex™ HPIC™ systems such as the Thermo Scientific Dionex ICS-5000+HPIC system, which can operate up to 5000 psi.
The Dionex CarboPac SA10-4μm column should be used as a direct replacement for the Dionex CarboPac SA10 column only if an HPIC system is available
The polymeric Dionex CarboPac SA10-4μm column is packed with 4 μm supermacroporous substrate, coated with the same strong anion-exchange layer of latex nano beads as the Dionex CarboPac SA10 column, which provides high capacity and rapid, high-resolution separations. The Dionex CarboPac SA10-4μm columns feature high reproducibility, and can withstand thousands of injection cycles under high pH conditions.
Thermo Scientific™ Dionex™ CarboPac™ SA10-4μm Column for Monosaccharide and Disaccharide Analysis Specifications | |
---|---|
Dimensions | Dionex CarboPac SA10-4μm Analytical Column: 4 × 250 mm and 2 × 250 mm Dionex CarboPac SA10-4μm Guard Column: 4 × 50 mm and 2 × 50 mm |
Maximum operating pressure | 5,000 psi (34.5 MPa) |
Temperature range | 4–60 °C |
Typical operating conditions | 4,000 psi at 1.5 mL/min (standard-bore column) or 0.38 mL/min (microbore column) Recommended flow rate: 1.5 mL/min (standard-bore) or 0.38 mL/min (microbore) |
Typical Eluents | Potassium hydroxide via Eluent Generation |
Resin composition | 4-μm diameter sumpermacroporous substrate (ethylvinylbenzene 55% crosslinked with divinylbenzene) agglomerated with 55-nm MicroBead difunctional quaternary ammonium ion (4.5% cross-linked). |
Anion-exchange capacity | Approximately 290 μeq/column (4 × 250 mm standard-bore column) Approximately 73 μeq/column (2 × 250 mm microbore column) |
Column construction | PEEK |
Analytical Columns | |
---|---|
Dionex CarboPac SA10-4μm Analytical Column (4 x 250 mm) | 088233 |
Dionex CarboPac SA10-4μm Analytical Column (2 x 250 mm) | 088235 |
Guard Columns | |
---|---|
Dionex CarboPac SA10-4μm Guard Column (4 x 50 mm) | 088234 |
Dionex CarboPac SA10-4μm Guard Column (2 x 50 mm) | 088236 |
相关产品
奥立龙Fisherbrand FE 系列双液接pH电极S35932
奥立龙Fisherbrand FE 系列单液接pH电极S35931
奥立龙Fisherbrand FE 系列pH/ATC电极S35930
奥立龙Accumet XL系列仪表IQOQ文件IQOQ-XL
奥立龙Accumet AE 自动温度补偿探头(120mm)13-620-21
奥立龙Accumet AE 自动温度补偿探头 (90mm)13-620-22
奥立龙Accumet AE DJ 凝胶填充 pH电极13-620-299B
奥立龙Accumet AE SJ 凝胶填充 pH电极13-620-108B
奥立龙Accumet AE SJ pH/自动温度补偿电极13-620-AE6
奥立龙溶解氧膜套,6个/个13-637-DOM
奥立龙FISHER SCIENTIFIC USB 鼠标13-637-692
奥立龙打印纸,2卷装13-637-691
奥立龙ACCUMET AB XL打印机,100-240V13-637-690
奥立龙RS232 输出线, PC到打印机13-637-681
奥立龙电导率校正组件13-637-674
关注
拨打电话
留言咨询