CarboPac PA1碳水化合物柱 057179_价格_上海希言科学仪器有限公司

产品详情

CarboPac PA1 Carbohydrate Column

Ideal Column for the Separation of Neutral and Acidic Monosaccharides

The CarboPac^® PA1 is an anion-exchange column for the separation of mono-, disaccharides, and specific oligosaccharides using an isocratic eluent. Sialic acid analysis has also been demonstrated on this column.

General-purpose column for isocratic determination of monosaccharides and disaccharides
Detection by pulsed amperometric detection; no derivatization needed
Approved for use in a variety of official methods for the analysis of foods

The unique MicroBead^™ pellicular structure of the CarboPac PA1 resin gives it stability from pH 0–14 at all concentrations of buffer salts. The pellicular resin structure allows excellent mass transfer resulting in fast gradient reequilibration.

The CarboPac PA1 column is used with pulsed amperometric detection; no derivatization is required. Sensitivity on the PA1 is not as high as with the CarboPac PA20 or PA10 for monosaccharide analysis. Thus the CarboPac PA1 is well suited for the analysis of foods for nutritional labeling. The CarboPac PA1 has been approved for use in a number of official methods.

CarboPac PA1 Column for Routine Carbohydrate Analysis Specifications
Dimensions	CarboPac PA1 Analytical Column: 4 × 250 mm and 2 × 250 mm CarboPac PA1 Guard Column: 4 × 50 mm and 2 × 50 mm CarboPac PA1 Semipreparative Column: 22 × 250 mm
Maximum operating pressure	4000 psi (27.9 MPa)
Temperature range	4–55 °C Recommended operating temperature: ambient
Typical operating conditions	1500 psi at 1.0 mL/min (analytical and guard columns) Recommended flow rate: 1.0 mL/min (for 4 × 250 mm)
Mobile phase compatibility	pH 0–14; up to 2% of common HPLC solvents. Acetate or hydroxide eluents only.
Resin composition	10-μm-diameter substrate (polystyrene 2% cross-linked with divinylbenzene) agglomerated with 500-nm MicroBead quaternary ammonium functionalized latex (5% cross-linked).
Anion-exchange capacity	Approximately 100 μeq/column (4 × 250 mm analytical column)
Column construction	PEEK with 10-32 threaded-ferrule-style end fittings. All components are nonmetallic.

Analytical Columns
CarboPac PA1 Analytical Column (2 x 250 mm)	057178
CarboPac PA1 Analytical Column (4 X 250 mm)	035391
CarboPac PA1 Semi-Preparative Column (9 x 250 mm)	039686
CarboPac PA1 Semi-Preparative Column (22 x 250 mm)	SP2866

Guard Columns
CarboPac PA1 Guard Column (2 x 50 mm)	057179
CarboPac PA1 Guard Column (4 x 50 mm)	043096
CarboPac PA1 Guard (9 x 50 mm)	063501

CarboPac PA1碳水化合物柱 057179信息由上海希言科学仪器有限公司为您提供，如您想了解更多关于CarboPac PA1碳水化合物柱 057179报价、型号、参数等信息，欢迎来电或留言咨询。除供应CarboPac PA1碳水化合物柱 057179外，上海希言科学仪器有限公司还可为您提供其他等产品，公司有专业的客户服务团队，是您值得信赖的合作伙伴。

供货周期：	现货
品牌：	戴安
货号：	57179