供货周期: | 现货 |
品牌: | 戴安 |
货号: | SP2866 |
The CarboPac® PA1 is an anion-exchange column for the separation of mono-, disaccharides, and specific oligosaccharides using an isocratic eluent. Sialic acid analysis has also been demonstrated on this column.
General-purpose column for isocratic determination of monosaccharides and disaccharides
Detection by pulsed amperometric detection; no derivatization needed
Approved for use in a variety of official methods for the analysis of foods
The unique MicroBead™ pellicular structure of the CarboPac PA1 resin gives it stability from pH 0–14 at all concentrations of buffer salts. The pellicular resin structure allows excellent mass transfer resulting in fast gradient reequilibration.
The CarboPac PA1 column is used with pulsed amperometric detection; no derivatization is required. Sensitivity on the PA1 is not as high as with the CarboPac PA20 or PA10 for monosaccharide analysis. Thus the CarboPac PA1 is well suited for the analysis of foods for nutritional labeling. The CarboPac PA1 has been approved for use in a number of official methods.
CarboPac PA1 Column for Routine Carbohydrate Analysis Specifications | |
---|---|
Dimensions | CarboPac PA1 Analytical Column: 4 × 250 mm and 2 × 250 mm CarboPac PA1 Guard Column: 4 × 50 mm and 2 × 50 mm CarboPac PA1 Semipreparative Column: 22 × 250 mm |
Maximum operating pressure | 4000 psi (27.9 MPa) |
Temperature range | 4–55 °C Recommended operating temperature: ambient |
Typical operating conditions | 1500 psi at 1.0 mL/min (analytical and guard columns) Recommended flow rate: 1.0 mL/min (for 4 × 250 mm) |
Mobile phase compatibility | pH 0–14; up to 2% of common HPLC solvents. Acetate or hydroxide eluents only. |
Resin composition | 10-μm-diameter substrate (polystyrene 2% cross-linked with divinylbenzene) agglomerated with 500-nm MicroBead quaternary ammonium functionalized latex (5% cross-linked). |
Anion-exchange capacity | Approximately 100 μeq/column (4 × 250 mm analytical column) |
Column construction | PEEK with 10-32 threaded-ferrule-style end fittings. All components are nonmetallic. |
Analytical Columns | |
---|---|
CarboPac PA1 Analytical Column (2 x 250 mm) | 057178 |
CarboPac PA1 Analytical Column (4 X 250 mm) | 035391 |
CarboPac PA1 Semi-Preparative Column (9 x 250 mm) | 039686 |
CarboPac PA1 Semi-Preparative Column (22 x 250 mm) | SP2866 |
Guard Columns | |
---|---|
CarboPac PA1 Guard Column (2 x 50 mm) | 057179 |
CarboPac PA1 Guard Column (4 x 50 mm) | 043096 |
CarboPac PA1 Guard (9 x 50 mm) | 063501 |
相关产品
奥立龙Fisherbrand FE 系列双液接pH电极S35932
奥立龙Fisherbrand FE 系列单液接pH电极S35931
奥立龙Fisherbrand FE 系列pH/ATC电极S35930
奥立龙Accumet XL系列仪表IQOQ文件IQOQ-XL
奥立龙Accumet AE 自动温度补偿探头(120mm)13-620-21
奥立龙Accumet AE 自动温度补偿探头 (90mm)13-620-22
奥立龙Accumet AE DJ 凝胶填充 pH电极13-620-299B
奥立龙Accumet AE SJ 凝胶填充 pH电极13-620-108B
奥立龙Accumet AE SJ pH/自动温度补偿电极13-620-AE6
奥立龙溶解氧膜套,6个/个13-637-DOM
奥立龙FISHER SCIENTIFIC USB 鼠标13-637-692
奥立龙打印纸,2卷装13-637-691
奥立龙ACCUMET AB XL打印机,100-240V13-637-690
奥立龙RS232 输出线, PC到打印机13-637-681
奥立龙电导率校正组件13-637-674
关注
拨打电话
留言咨询