光时域反射计

FTE7000A-DWDM OTDR波分复用光时域反射计The FTE7000A-DWDM is a Tunable DWDM OTDR with 89 wavelengths from the C Band spectrum. These 89 wavelengths are available in a single hand-held, tunable OTDR. The FTE7000A-DWDM also operates as Tunable Light source with 0 to +5 dBm output. Use the FTE7000A-DWDM for commissioning and troubleshooting DWDM Metro Ethernet Networks. The FTE7000A-DWDM OTDR offers one-touch auto test with up to 89 DWDM wavelengths, Automatic Pass/Fail summare with Fib-R-Map trace analysis and allows for testing throught MUX and DEMUX units. Use the Supplied Cert-Soft software to produce complete networks test documentation. The FTE7000A-DWDM also includes a auto pass/fail video scope with auto image centering. FTE7000A-DWDM OTDR密集波分复用光时域反射计 Features? Tunable OTDR with 89 C Band Wavelengths? Tunable CW/Pulsed Laser Source w/ 50/100GHz Spacing? Touch Screen Operation ? Fib-R-View Auto Pass/Fail/Centering Fiber Inspector ? Fib-R-Map Comprehensive Event Analysis? 89 Channels (17-61) on the ITU Grid? 35 dB OTDR Dynamic Range? 12 Hour Li-ion Battery Pack? Bidirectional Analysis? Bluetooth Android Tablet Operation? Report Generating Software Included Applications? Fiber Characterization in DWDM Networks? Varify ROADM Channel Routing? Wavelength Provisioning ? Test through OADMs? In service DWDM Network Trouble shooting? CBH Antenna Feeds Ordering InformationFTE-7000A-DWDM C Band DWDM Tunable OTDR/Laser Source 1528-77nm - 1563-86nmFTE-DWDM-KFTE7000A-DWDM OTDT/Laser Source and FTE8100-C Mini OSA VIS300Video Probe for FTE7500A-CWDM and FTE7500A-DWDM and FTE7000 SeriesVideo ProbeFTE7000A-DWDM OTDR SpecificationsStandard Wavelengths1528.77-1563.86nm @ 0.4 and 0.8nm Spacing Dynamic Range35dBPulse Width5 - 20,000 nsUnits of Measurementkm, kf, mi Event Dead zone1m Attenuation Dead Zone4m Data Pointsup to 120,000Resolution .125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution)Full Scale Distance Range1-240km Typical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048Linearity ± .05 dB/dBMemory Capacity(Internal) ~1000TL SpecificationsFrequency Range192 - 196 THz (1529-1563nm) Accuracy 1.5 GHzLine Width 1 MHz Side Mode Suppression Ration45 dB Output Power Range+8 dBm to +14 dBm (C Band) Power Setting Resolution0.01 dB Power Variation over Wavelength Range± 0.5 dB Minimum Channel Spacing 50 GHz (0.4nm)Fiber Type9/125 μm ±Relative Intensity Noise-140 dB/Hz General SpecificationsGraphical Display4 in Color Touch Screen Power Supply / Charger Input 100-240V 50-60Hz, 0.6A / Output 15V, 1.2ABattery / Operating Time Rechargeable Li-Ion / 10 hourStorage Temperature -20 to 60 COperating Temperature Range-10 to 40 C Dimensions (w/out rubber boot )7.75” L x 4.5” W x 2.25” H (197mm L x 114mm W x 57mm H) Weight1.7 lbs Communications / PortsBluetooth / USB-PCConnector StylesFC, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC and SC Adapters, Windows/Telcordia SR4731 Software, Rubber Boot and Manual on CD, 2 stylus FTE7000A-DWDM OTDR密集波分复用光时域反射计

FTE7500A 36/35dB OTDR 高级Cobra 光时域反射计 FTE-7500光时域分析仪测试速度快， 使用方便，经济，坚固。这款光时域分析仪具有手携式仪器的全部优点,具有短的盲区，明亮的4英寸显示屏，机载背景系统帮助使用者学习，1/2秒的刷新速度，动态范围大，易于操作使用。 这些特性使其在各类网络领域获得广泛应用。该产品不仅方便老用户操作，也受到新用户的欢迎。FTE-7500提供如下3种组合：850/1300 MM, 1310/1550 SM and quad (850/1300/1310/1550) ，坚固的外壳设计可在任何工作环境中使用。FTE-7500的测量距离可以达到240km, 在LAN网络测试中具有优良的表现性能。 Features? 36 dB Dynamic Range? Instant On? 1 Meter Dead Zone ? Event Table with Pass/Fail Feature? Trace Overlay Capability? Onboard Memory for ~500 traces? Auto Test Power Meter? Stable Light Source? Built in Video Inspection Scope ? Visible Fault Locator? USB Flash Drive Port and Mini USB Port? Context Sensitive Help? Light Weight Rugged Enclosure? Easy To Read Color Display? CertSoft Report Software? Long Battery LifeOrdering InfomationFTE-7500A-8513850/1300nm Multimode Dual Wavelength OTDR W/VFL and LTSFTE-7500A-13151310/1550nm Single Mode Dual Wavelength OTDR W/VFL and LTSFTE-7500A-QUAD 850/13001310/1550nm Quad Wavelength OTDR W/VFL and LTSFTE-SCASE-LG Soft Case for FTE-7500 and FTE-8000 SeriesCI1100Video Probe for FTE7500 and FTE-8000 SeriesFTE-7500A Specifications Wavelength 850, 1300, 1310, 1550, 1625nm ±20nm Dynamic Range 27/26dB MM, 36/35/35dB SM, Pulse Width 5 - 20,000 ns Units of Measurement km, kf, mi Event Dead zone1m Attenuation Dead Zone5m Resolution.125 - 32m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range1-64km MM , 1-240km SM Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) 1.024 - 2.048 Linearity ± .05 dB/dB Memory Capacity~500 Memory TypeInternal and Flash Drive Power Supply / ChargerUniversal 110-220V witn Interchangeable MainsBattery8hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.75” L x 4.5” W x 2.25” H (197mm L x 114mm W x 57mm H) Weight2 lbsCommunications portsUSB and USB Flash Drive PortsConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Windows/Telcordia SR4731 Software, Rubber Boot and Manual on Flash Drive Power MeterDetector TypeInGaAsConnector Type2.5mm Interchangeable+5 to -77dB (CATV - +25 to -57dB)Calibrated Wavelengths850,1300,1310,1490,1550,1625nmUnits of MeasurementdBm, dBResolution.01 dBPower MeasurementUncertainty±0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmAuto Test Range0 to -40dB CW Source Fiber Type Single mode, MultimodeWavelengths850, 1300, 1310, 1550, 1625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz Visible Light SourceEmitter TypeLaserWavelength650nm ±5nmLaser Safety ClassClass IIFDA21 CFR1040.10 &1040.11 IEC 825-1: 1993Connector Type2.5mm UniversalOutput Power1mW Max.

FTE1700 32/30dB OTDR 经济型光时域反射计The U.S. made FTE-1700 has all the features of the FTE-7000, but with the added feature of bluetooth operation. The FTE-1700 may be operated over Bluetooth with the free Android app.This Android OTDR is one of the most affordable OTDRs on the market today. This unit is equipped with Bluetooth for use with any compatible Android device operating 2.2 or newer operating system, having bluetooth capability. This unit is available in 1310/1550nm, 850/1300 dual wave, single wave or quad wavelength configurations. This OTDR comes standard with a video scope (for use with optional VIS300 video probe) and power meter. Operate the OTDR either from either the onboard keypad or use your Android phone or tablet. The Android application allows for more mobility, offers a more powerful file management system, Geo- tagging of files, easy file sharing as well as a display limited only by the size of your Android device. The FTE-1700 has a 32/30 dB dynamic range with a 2 meter dead zone. Testing is made simple and fast with the press of the Autotest button. Examine the trace using the straight forward zoom feature and A/B cursor selection button or quickly zero in on events with the powerful event selection feature. The FTE-1700 OTDR’s abundant dynamic range and a 2 meter dead zone, makes it ideal for links up to 240km as well as being perfect for short LAN links within the facility and FTTA/FTTH applications. Trace analysis and reporting is fast and easy with the Pass/Fail feature, onboard event table or the supplied Telcordia SR4731 software with multi-trace, macro bend and bi-directional capability. The OTDR has on board storage of 1000 traces with the ability to download traces directly to your computer via USB cable. If you use your android phone or tablet, storage is only limited by your removable drive or cloud storage capabilities. Features? Most Affordable OTDR on the Market? Free Fiber-Droid Application? Optional Video Probe ? Live Fiber Detection? Bluetooth Operation? Bi-directional Averaging? Macro Bend Analysis? Ultra Fast Trace Acquisition? One Short Dead Zone? Button Testing? Event Table with Pass/Fail Analysis? Trace Comparison with Trace Overlay? Easy Training with Onboard Help Screens? CertSoft Report Software Included? Onboard Memory for 1000 tracesOrdering InformationFTE-1700-8513850/1300nm Multimode Dual Wavelength OTDR Includes Video Scope with Probe and LTSFTE-1700-13151310/1550nm Single Mode Dual Wavelength OTDR Includes Video Scope with Probe and LTSFTE-1700-QUAD 850/13001310/1550nm Quad Wavelength OTDR Includes Video Scope with ProbeFTE-1700E-1315 1310/1550nm Single Mode Dual Wavelength Economy OTDR(Choice of one adapter for Economy OTDR)FTE-SCASE-LG Soft Case for FTE-7500. FTE-6000 and FTE-8000 SeriesVIS-300Video Probe for FTE-1700, FTE-7000A, FTE7500 and FTE-8000 Series***Video Probe and Soft Case are included with the purchase of an FTE1700 (excluding the FTE1700E)** OTDR Specification Wavelength 850, 1300, 1310, 1550nm ±20nm Dynamic Range 27/26dB MM, 32/30dB SM, Pulse Width20 - 10,000 ns Units of Measurementkm, kf, mi Event Dead zone2m Attenuation Dead Zone5m Resolution0.25 - 64m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range1-64km MM , 1-240km SM Typical Real-time Refresh Rate4 Hz Group Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dB Memory Capacity1000 traces Memory TypeInternal Power Supply / ChargerUniversal 110-220V witn Interchangeable MainsBattery 6hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.62” L x 3.88” W x 1.56” H (194mm L x 99mm W x 40mm H) Weight 1.6 lbsCommunications portsUSB and BluetoothConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, CertSoft Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAsConnector Type2.5mm InterchangeableDynamic Range+5 to -77dB (CATV - +25 to -57dB)Calibrated Wavelengths850,1300,1310,1490,1550,1625nmUnits of MeasurementdBm, dBResolution.01dBPower MeasurementUncertainty± 0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmAuto Test Range0 to -40dBCW Source Specifications Fiber Type Single mode, MultimodeWavelengths850, 1300, 1310, 1550, 1625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

FTE7500A-CWDM-12 OTDR高级光时域反射计The FTE7500A-CWDM-12 offers up to 12 CWDM Wavelengths in a Single OTDR. These OTDRs may be order with 8, 10 or even 12 CWDM wavelengths. Standard units include 1471-1611nm for 8 wavelengths and 1431-1611nm for 10 wavelengths or configure a 12 wavelength unit using the 1471-1611nm 8 wavelength unit and add 4 additional wavelengths of your choice. Test a fiber at 1, 2 or up to 12 wavelengths with the touch of just one button. The Fault Finder mode uses one button to scan a fiber under test, have the OTDR select the best parameters at the selected wavelength and displays event analysis. The onboard Broadband Power Meter is calibrated at up to 12 CWDM wavelengths. to match the OTDR configuration. The FTE7500A-CWDM may be used as a CW light source. Select any of the configured wavelengths as a CW light source for commissioning or for Loss test with the onboard Power Meter. The CertSoft Software Suite, project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image. Features? 35 dB Dynamic Range? Express Help System? CW & Fiber Identifier Light Source? Video Scope With Pass/Fail Grading Zones? Integrated Power Meter? Bidirectional Trace Analysis with Certsoft? Full Auto, Construction and Expert Modes? Live Fiber Detection? Onboard Memory of ~4000 traces? CertSoft Report Software with .sor Capability? Dual Trace Capability Ordering InfomationFTE-7500A-CWDM-121471-1611nm +4 Additional Wavelengths of Choice, CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-101431-1611nm 10 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-OE 1271-1411nm, 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-7500A-CWDM-SCL1471-1611nm 8 Wavelength CWDM OTDR W/VFL, LTS, Video Scope Capability (Probe Sold Separately)FTE-SCASE-LGSoft Case for FTE7500, FTE600 and FTE8000 SeriesVIS-300Video Probe For FTE7000 and FTE7500-CWDM and FTE7500-DWDM SeriesFTE-7500A-CWDM Specifications Wavelength CWDM Wavelenghts (1271nm-1611nm) as Configured +/-3nm Dynamic Range35dB Pulse Width 5 - 20,000 ns Units of Measurement km, kf, mi Event Dead zone1m Attenuation Dead Zone4m Resolution.125 - 32m Distance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range10.25-260km Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) 1.024 - 2.048 Linearity ± .05 dB/dB Memory Capacity~500 Memory TypeInternal and External USB Flash Drive Power Supply / ChargerInput 100-240VAC, 50-60Hz, 0.3A, Output 13.6V, 1.2ABattery8hrStorage Temperature-20 to 60 COperating Temperature Range-10 to 40 CDimensions (w/out rubber boot )8.62” L x 4.25” W x 2.375” H (219mm L x 108mm W x 60mm H) Weight2 lbsCommunications portsUSB and USB Flash Drive PortsConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/interchangeable mains, Interchangeable FC/ST and SC Adapters for optical port and FC, ST, SC, 1.25mm and 2.5mm universal adapters for power meter port, Software, Manual on CD and Protective Rubber Boot Power MeterDetector TypeInGaAsConnector TypeInterchangeable - FC?ST/SC/1.25mm univ and 2.5mm univ. Measurement Range+5 to -77dB (CATV - +25 to -57dB)Calibrated WavelengthsAs configured with OTDR wavelengthsUnits of MeasurementdBm, dBResolution.01 dBPower MeasurementUncertainty±0.18 dB under reference conditions± 0.25 dB from 0 to -65 dBm± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBm CW Source Fiber Type Single mode, MultimodeWavelengths(Light Source Wavelengths are Limited by the OTDR Configuration)Output Power0 dBm Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz Visible Light SourceEmitter TypeLaserWavelength650nm ±5nmLaser Safety ClassClass IIFDA21 CFR1040.10 &1040.11 IEC 825-1: 1993Connector Type2.5mm UniversalOutput Power1mW Max.

太赫兹时域光谱仪(台式) 筱晓光子供应太赫兹时域光谱仪(Benchtop)，如下模块组成：飞秒激光器、光导天线、延迟线、脉冲发生器、锁相放大器、密封样品室、操作软件、笔记本电脑。该系列THz太赫兹时域光谱仪是一种透射式检测系统，为了便于将系统扩展至反射模式和成像模式，外部光纤耦合模块可供选择。SpecificationsTDS1008 with 800nm laserTDS1010 with 1040nm laserTDS1015 with 1560nm laserSpectral range0.05-3.5Thz0.05-2.5Thz0.05-2ThzDynamic range60dB60dB50dBScan range500ps (2GHz resolution)THz beam diameter22mm (collimated beam)/1-3mm (focussed beam) Sample size55×55mm (collimated beam)/5×5mm (focussed beam)Supply voltage100-240V, 50-60HzDimensions600×600×250mm3Weight50kg

SA-Stage-RT透反射测量支架 关键词：反射/透射/漫反射光谱 1 产品简介SA-Stage-RT透反射测量支架是一个新型的，能满足透射和反射测量的采样支架。适用于分析如硅、金属、玻璃和塑料等一类的材料。SA-Stage-RT与如海光电的光纤光谱仪、光源、积分球有多种组合方式。可以同时满足客户对于反射光谱测量和透射光谱测量的需求。 2 产品功能示意图3 产品参数产品参数SA-Stage-RT底座尺寸φ150mm样品区域尺寸宽度＜100mm样品通光口径（透射测量）直径10mm调节高度~150mm（其他长度可以定制）准直镜波长范围200~2500nm台体材料阳极氧化铝反射积分球用于连接38毫米积分球（另外选配）用途 专为透反射光纤测量而设计，能有效固定光纤，防止因抖动等人为因素影响检测效果

FC-TDS 太赫兹光时域系统德国BATOP公司在TH系统的产品性价比非常高，款式也很多。 其主要产品有: TDS10XX、FC TDS和TDS（1060nm飞秒激光器）及其成像系统。 FC TDS是BATOP公司推出的全光纤式THz-TDS系统。 主要特点：脉冲THz波最高达1.5THz简单方便全光纤结构可透射也可反射THz波可聚焦也可准直包含软件 性能参数：频率范围0.05～1.5THz动态范围50dB扫描范围500ps(3GHz频率分辨)THz直径12mm（准直结构）THz光斑大小1.5mm@1THz（聚焦结构）快扫描周期0.5s慢扫描周期8分钟偏置电压10V调制频率1～30KHz（默认10KHz）电源电压115～230V 激光要求：波长1μm，1.56μm脉冲宽度＜200fs（越短越好）重复频率～100MHz平均功率≥60mW 软件截屏：

SA-Stage-C 单点反射支架SA-Stage-C单点反射测量支架是一个光纤探头支架，用于厚度达150mm的光学层和其它基底的反射测量。这一反射光纤探头支架适于固定直径达6.35mm的反射光纤探头和其它取样设备，可以在一个不锈钢支柱上上下滑行，调节高度可达80mm。规格 SA-Stage-C尺寸：Φ 150mm×厚10mm高度：垂直可调高度80mm材质：铝合金表面处理：亚光发黑适配产品： QR系列反射光纤用途：专为反射光纤测量而设计，能有效固定光纤探头，防止因抖动等人为因素影响检测效果。

FTE7000A-EXT 39dB OTDR光时域反射计专业触屏The FTE7000A-EXT Optical Time Domain Reflectometer is designed for Metro or PON applications. With 39dB at 1310nm and 1550nm there is abundant range to meet your requirements. Add the 39dB 1625nm active port to perform liver fiber test in your PON networks. The FTE7000A series is a simple to operate touch screen unit with a bright color display. As with our other FTE7000A units, it has an IEC61300-3-35 method “B” video inspection system for use with the optional VIS300 video probe. The FTE7000A-EXT and FTE7000A-PON units have our rechargeable lithium Ion battery pack that supports up to 10 hours of operation with a quick 2 hour recharge cycle. This unit includes all the features expected in today’s hand held OTDR and more bright color touch screen, project management, file storage, Fib-R-Map schematic event analysis, pass/fail threshold settings and onboard context sensitive Express Help system to keep the learning curve shor and simple.This OTDR may also be operated with our Andriod app which is a real time application for your compatible android tablet or phone. The FTE7000A weighs less then 2.0 pounds and with a hardened water resistant enclosure in a sturdy rubber boot, this OTDR is great for all working conditions. You can print professional reports that include Fib-R-Map schematic analysis and loss tests set measurements with the included “CertSoft” certification software suite. Features? 39 dB Dynamic Range ? 10 Hour Battery Life w/2 Hour Quick recharge ? Auto-Grade Fault Finder? Express Help System? Bluetooth Operation with Android Devices? Video Scope With Pass/Fail Grading Map? Fib-R-Map Event Analyzer? Macro Bend and Bidirectional Analysis ? Full Auto, Construction and Expert Modes ? Instant On, Immediate Scan ? Live Fiber Detection? Onboard Memory of ~4000 traces? CW / Fiber Identifier Light Source? CertSoft Report Software with .sor Capability ? Real Time System ORLOrdering Information FTE-7000A-EXT 1310/1550 nm SM Dual Wavelength OTDR with Video Scope/Probe and LTS FTE-7000A-PON 1310/1550nm with 1625 Acitve, PON OTDR with Video Scope/Probe and LTSVIS300Video ProbeFTE7000A SpecificationsWavelength1310, 1550 and 1625 ±20nmDynamic Range39/39/38dBPulse Width 5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone 4mData Pointsup to 120,000Resolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution)Full Scale Distance Range0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048Linearity± .1 dB/dBMemory Capacity~1000Memory TypeInternal Power Supply / ChargerUniversalBattery Type/OperationLi-ion /10 hr typ.Storage Temperature-20 to 60 C Operating Temperature Range-10 to 40 CDimensions (w/rubber boot )8.75” L x 4.25” W x 2.125” H (222mm L x 108mm W x 554m H)Weight1.7 lbs (0.8 kg)Communications portsUSB and BluetoothOTDR Connector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable OTDR Adapters, FC/ST and SC.Interchangable Power Meter Adapters, FC/ST/SC/1.25mm univ and 2.5mm univ., Android Application, Windows Compatible Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAs Connector TypeInterchangable Dynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths850,1300,1310,1490,1550,1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of MeasurementdBm, dB Resolution.01 dBLight Source SpecificationsFiber TypeSingle mode Wavelengths1310, 1550 and 625 nm ±20nm or (As Ordered with OTDR)Output Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 Regulation Modulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

镀介质膜元件：包括激光高反射镜，分光镜，激光输出耦合镜，波长分束镜，增透膜窗口等。材质：主要材质有BK7，UVFS。规格：直径有12.7mm，25.4mm和50.8mm。用途：适用波长从紫外到近红外波段，高反射镜反射率可达到99.9%。

线性激光窄带反射镜高反射率、高损伤阈值，覆盖紫外到红外的所有主流激光器的波段。有十几款不同产品对应不同的波长和不同激光美国CVI laser optics 反射镜有超过350种镜片可供选择；设计入射角为0°或45°，覆盖波段从190nm 到 2000nm 提供金、银、铝等金属镀膜，用于提高反射率、起保护作用等；使用BK7或UVFS材料，能够实现λ/10表面质量的镜片；提供具有高反射率的镀膜镜片,如MaxMirror 和MaxBRlte 能在宽波段内实现大于98%的反射率。若是单面镀膜,会在未镀膜面用箭头指向镀膜面,方便使用。

FTE7000A-CWDM OTDR粗波分复用光时域反射计The FTE7000A Optical Time Domain Reflectometer is designed for your CWDM networks with 4 CWDM lasers per unit. These units have 36dB dynamic range to meet your CWDM testing requirements. The FTE7000A series is a simple to operate touch screen unit with intuitive operation. As with our other FTE7000A units, it has an IEC61300-3-35 method “B” video inspection system for use with the optional VIS300 video probe. The FTE7000A-CWDM units have our rechargeable lithium Ion battery pack that supports up to 10 hours of operation with a quick 2 hour recharge cycle. This unit includes all the features expected in today’s hand held OTDR and more bright color touch screen, project management, file storage, Fib-R-Map schematic event analysis, pass/fail threshold settings and onboard context sensitive Express Help system to keep the learning curve short and simple. This OTDR may also be operated with our Android app which is a real time application for your compatible Android tablet or phone. The FTE7000A weighs less then 2.0 pounds and with a hardened water resistant enclosure in a sturdy rubber boot, this OTDR is great for all working conditions. You can print professional reports that include Fib-R-Map schematic analysis and loss tests set measurements with the included “CertSoft” certification software suite. Features? 36 dB Dynamic Range ? 10 Hour Battery Life w/2 Hour Quick recharge ? Auto-Grade Fault Finder? Express Help System? Bluetooth Operation with Android Devices? Video Scope With Pass/Fail Grading Map? Fib-R-Map Event Analyzer? Full Auto, Construction and Expert Modes ? Instant On, Immediate Scan ? Live Fiber Detection? Onboard Memory of ~4000 traces? CW / Fiber Identifier Light Source ? CertSoft Report Software with .sor Capability ? Real Time System ORLOrdering Information FTE-7000A-LR 1471/1491/1511/1531nm SM 36dB Dual Wavelength OTDR, Video Scope with Probe and LTS FTE-7000A-HR 1551/1571/1591/1611nm with 1625 Acitve, 39dB PON OTDR, Video Scope with Probe and LTSVIS300Video ProbeFTE7000A SpecificationsWavelength1471/1491/1511/1531 or 1551/1571/1591/1611nm +/-3nmDynamic Range 36dBPulse Width5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone4mResolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dBMemory Capacity~4000Memory TypeInternal Power Supply / ChargerUniversalBattery Type/OperationLi-ion /10 hr typ.Storage Temperature-20 to 60 C Operating Temperature Range-10 to 40 CDimensions (w/rubber boot )8.75” L x 4.25” W x 2.125” H (222mm L x 108mm W x 554m H)Weight1.7 lbs (0.8 kg) Communications portsUSB and BluetoothOTDR Connector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable OTDR Adapters, FC/ST and SC.Interchangable Power Meter Adapters, FC/ST/SC/1.25mm univ and 2.5mm univ., Android Application, Windows Compatible Software, Rubber Boot and Manual on CDPower Meter SpecificationsDetector TypeInGaAsConnector TypeInterchangable - 1.25mm and 2.5mm univ, FC, ST, and SC includedDynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths850, 1300, 1310, 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611, and 1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of Measurement dBm, dBResolution.01 dBLight Source SpecificationsFiber Type Single modeWavelengthsAs Ordered with OTDROutput Power0 dBm Laser Safety Classification Class I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

FTE7000A 36/35dB Advanced OTDR光时域反射计触屏The FTE-7000A Optical Time Domain Reflectometer performs a wide variety of functions as well as being a fast, simple to use OTDR. Its instant on feature, ease of use, rugged housing and affordable price make this the best day to day unit on the market. This unit includes an integrated Video Scope with pass/fail grading map, AutoTest /AutoWave Power Meter and CW/Fiber Identifier Light Source. It is available in 850/1300nm dual multi mode, 1310/1550nm dual singlemode, triple wave and 850/1300/1310/1550nm quad wavelength versions. The FTE-7000A has a 36dB dynamic range and a 1 meter dead zone. These specifications, and a full set of operational modes, such as one button fault finder, construction, real time and full manual mode, make it perfect for most testing and troubleshooting requirements, in LAN, MAN, or WAN Applications. This unit includes all the features expected in today’s hand held OTDR and more bright 4” color touch screen, file storage, Fib-R-Map schematic event analysis, pass/fail threshold setting and onboard context sensitive help to keep the learning curve as short as possible. This OTDR also operates with our Android application allowing operation via compatible Android devices.The FTE-7000A weighs in at less then 2.0 pounds and with a hardened water resistant enclosure, this OTDR is great for all working conditions. The rubber boot with bail adds protection and provides the ideal angle for viewing the display while operating on a work bench. Print professional reports that can include loss tests set measurements and connector end face images with the included “CertSoft” certification software suite. Features? Instant On, Immediate Scan? Touch Screen, Keyboard or Tablet Control? Storable Project Management w/Parameter Setup Screen? CW & Fiber Identifier Light Source? Bluetooth Android Tablet Operation? 36 dB Dynamic Range W/1 meter Dead Zone? Video Scope With Pass/Fail Grading Map? CertSoft Report Software with .sor Capability? Auto-Wavelength Power Meter? Bi-Directional Trace Analysis? Fib-R-Map Event Analyzer? SM, MM, Triple and Quad Units Available? Full Auto, Construction and Expert Modes? Live Fiber & Macro Bend Detection? Onboard Memory of ~1000 tracesOrdering InformationFTE-7000A-8513850/1300nm Multimode Dual Wavelength OTDR W/Video Scope/Probe and LTS. FTE-7000A-13151310/1550nm Single Mode Dual Wavelength OTDR W/Video Scope/Probe and LTS. FTE-7000A-QUAD 850/13001310/1550nm Quad Wavelength OTDR W/Video Scope and ProbeVIS300Video ProbeFTE7000A SpecificationsWavelength850, 1300, 1310, 1490,1550 and 1625 ±20nmDynamic Range27/26dB MM, 36/35/35/35dB SM,Pulse Width 5 - 20,000 nsUnits of Measurementkm, kf, miEvent Dead zone1mAttenuation Dead Zone4mData Pointsup to 120,000Resolution.125 - 32mDistance Uncertainty±(0.75m + 0.005% x distance + sampling resolution) Full Scale Distance Range0.25-64km MM , 0.25-240km SMTypical Real-time Refresh Rate2 HzGroup Index of Refraction (GIR)1.024 - 2.048 Linearity± .05 dB/dBMemory Capacity~1000Memory TypeInternal Power Supply / ChargerUniversalBattery6hrStorage Temperature-20 to 60 C Operating Temperature Range-10 to 50 CDimensions (w/out rubber boot )7.62” L x 3.88” W x 1.56” H (194mm L x 99mm W x 40mm H)Weight1.7 lbs (0.8 kg) Communications portsUSB and BluetoothConnector StylesFC, ST, SC InterchangeableAccessories ProvidedUniversal Power Adapter w/US, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Android Application, Windows Compatible Software, Rubber Boot and Manual on CD Connector Type2.5mm InterchangeableDynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths Power Meter SpecificationsDetector TypeInGaAs 850,1300,1310,1490,1550,1625nmPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of MeasurementdBm, dB Resolution.01 dBLight Source SpecificationsFiber TypeSingle mode, Multimode Wavelengths850,1300,1310,1490,1550 and 625 nm ±20nmOutput Power0 dBm (-3dBm @ 1625nm)Laser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 Regulation Modulation ModesCW, 270 Hz, 1000 Hz, 2000 Hz

自由空间THz-TDS 太赫兹时域光谱系统德国BATOP公司在THz系统的产品性价比非常高，款式也很多。主要产品有: TDS10XX、FC TDS和TDS（1060nm飞秒激光器）及其成像系统。 自由空间结构THz-TDS是基于1060nm飞秒光纤激光器的时域光谱系统。 主要特点：飞秒光纤激光器作为激励源发射天线为PCA-40-05-10-1060-a-l接收天线为PCA-44-06-10-1060-a-l延迟线最高可延迟1ns包含软件性能参数：频率范围0.1～2.5THz动态范围60dB 信噪比@0.4 THz1000最短扫描周期0.5s焦点离天线距离50mm

Stage-RTL-T型平台是一种新型采样系统，适用于分析如硅、金属、玻璃和塑料一类的材料。RTL-T与海洋光学的光谱仪和光源有多种组合方式，配合进行反射和传输测量 Stage-RTL-T包括一个附着在基座上的可调轨夹。有三个用螺丝固定在轨夹上的设备，包括一个带 UV-VIS校准镜头的光纤固定器；一个反射和传送的样品盒；一个光阱用来减少背射光和 环境光的影响。 STAGE-RTL-T型平台使用非常广泛：可以将探头放置在样品上或样品下（从下部测量时样品和探头要保持一个固定的距离）完成反射测量； 将光阱放置在适当的位置进行光反射测量；或使用两个光纤进行样品传输的测量。 STAGE-RTL-T型平台规格 尺寸(底座): 206.3 mm 尺寸 (样品区): 直径152.4 mm(样品架) 重: 4,500 g 高: 立杆可调至 400 mm

TDS10XX 时域光谱系统德国BATOP公司在THz系统的产品性价比非常高，款式也很多。其主要产品有: TDS10XX；FC TDS和TDS（1060nm飞秒激光器）及其成像系统。 TDS10XX是全封装时域光谱系统。 主要特点：全封装最高带宽3.5THz 可充氮气进行采样光纤输入口 性能参数：频率范围0.05～3.5THz（800nm激光的TDS1008）0.05～2.5THz（1040nm激光的TDS1010）0.05～2THz（1560nm激光的TDS1015）动态范围60dB（800nm激光的TDS1008）60dB（1040nm激光的TDS1010）50dB（1560nm激光的TDS1015）扫描范围500ps(2GHz频率分辨)THz直径22mm（准直结构）THz光斑大小1～3mm（聚焦结构）采样尺寸55×55mm（准直结构）5×5mm（聚焦结构）电源要求100～240V，50/60Hz外型尺寸1500px×60 cm×25 cm重量50kg电源电压115～230V

总览当超短激光脉冲通过光学系统时，其形状会发生变化。 由于色散与波长有关，每个单独的波都会有不同程度的延迟，并且传播时间会出现差异。 结果，激光脉冲变宽并且脉冲能量降低。 为了中和这种效应，使用了啁啾镜。LAYERTEC 生产特殊介电系统（反射镜、泵浦反射镜、短通或长通滤波器、解耦器等），可根据客户要求在 200 – 5000 nm 波长范围内对相位响应（即负或正 GDD）产生适应性影响 。具有简单布拉格反射镜（经典 Lambda/4 反射镜）或更大带宽的相位校正反射系统称为啁啾反射镜。 另一方面，用于仅在几纳米带宽上具有（高）负 GDD 的 ps 激光器的相位校正镜被称为 GTI 镜。LAYERTEC 超快激光啁啾反射镜,LAYERTEC 超快激光啁啾反射镜通用参数LAYERTEC 超快激光啁啾反射镜带普克尔斯盒的倾腔皮秒激光器的示意 带宽与布拉格反射镜大小相同的啁啾反射镜通常可以在不增加 GDD 振荡的情况下进行计算和制造。所需带宽越大，GDD 的振荡越强。在这些情况下，我们原则上建议使用其他光学元件（例如通过啁啾镜对）来相互补偿该 GDD 振荡啁啾反射镜236条编号外形双面形状涂层Laser mirror 109072Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)planeRear&ensp Side (S1)planeFront&ensp Side (S2)HR(0°,340-480nm)99.7%, GDD=-25fs² Chirped Mirror 100688Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)planeRear&ensp Side (S1)planeFront&ensp Side (S2)HR(0°,350-450nm)99.8%, GDD=-25fs² Chirped Mirror 109813Corning 7980 2F or equal&emptyv = 12.7  mmt = 6.35  mmFront&ensp Side (S2)planeRear&ensp Side (S1)planeFront&ensp Side (S2)HR(0°,480-640nm)99.85%, GDD=-70--40fs² Laser mirror 139481Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)planeRear&ensp Side (S1)planeFront&ensp Side (S2) HR(0°,505-525nm)99.9%, GDD=-100fs² Chirped Mirror 128916Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)planeRear&ensp Side (S1)planeFront&ensp Side (S2)HR(0°,520-540nm)99.9%, GDD=-375fs² Laser mirror 103954Corning 7980 2F or equal&emptyv = 12.7  mmt = 6.35  mmFront&ensp Side (S2)concaver = 50  mmRear&ensp Side (S1)planeFront&ensp Side (S2) HR(0°,620-1120nm)99.9%Laser mirror 137632Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)concaver = 500  mmRear&ensp Side (S1)planeFront&ensp Side (S2) HR(0°,620-1120nm)99.9%Chirped Mirror 103516Corning 7980 2F or equal&emptyv = 25  mmt = 6.35  mmFront&ensp Side (S2)concaver = 100  mmRear&ensp Side (S1)planeFront&ensp Side (S2) HR(0°,630-1140nm)99.85%, GDD=-200-100fs²

这款欧洲进口激光谱线反射镜/(HR Laser Line mirrors )是一种高功率激光反射镜,比较适合关于中心波长百分之十范围内的激光高反使用。激光谱线反射镜,高功率激光反射镜在窄带上提供绝佳的高反性能，而且比较适合对反射要求较高的应用。这款激光谱线反射镜,高功率激光反射镜比较适合关于中心波长10%范围浮动的激光的高反应用，比如，HR@800nm, 比较适合反射的激光范围为760-840nm, 由于激光谱线反射镜适合的激光波段较窄，因此高功率激光反射镜常常被称为激光谱线反射镜Laser Line mirrors 或单波长激光高反镜。 这种激光谱线反射镜常常用于腔外激光束的操作应用，对激光束的反射要求非常严格，不允许存在透过激光的问题产生，常常使用这种单波段激光谱线反射镜,高功率激光反射镜，但是它只适合固定的入射角(常用45度），而且最好是单波长激光或对波带宽度要求很窄的激光。 单波长激光谱线反射镜,高功率激光反射镜采用了离子束溅射技术（Iom Beam Sputtering, IBS)或电子束蒸发技术进行镀膜，这些镀膜技术非常成熟。 基片尺寸公差：+0/-0.1mm 基片波前畸变：基片表面质量：20/10 SD 40/20SD(曲面） 镀膜粘附性和耐久性：Per MIL-C-675A 净孔径： 90% 镀膜反射率：R99,6% @ 0o Rs99,8% and Rp99,3% @ 45o 激光损伤阈值:5-7J/cm2 for 10 ns pulses @1064nm激光谱线反射镜,高功率激光反射镜问询： 根据如下格式填写您的要求，复制后发邮件给我们，我们将及时回复报价 Substrate material ShapeRectangularRoundElliptic Dimensionsmm Thicknessmm TypePlano-ConvexFlat/FlatPlano-ConcaveOther Radius of Curvature (ROC) for curved substrates only eg ROC1=-50mm ROC2=+1000mm Surface quality20/1040/2060/4020/5 Central wavelengthnm Angle of incidence (AOI)deg Surface figure L/4 L L/2 L/8 Parallelism error10arcsec1arcmin3arcmin- WedgeNo wedge30arcmin1deg2deg3deg Comments

太赫兹时域光谱仪筱晓光子供应太赫兹时域光谱仪(THz time-domain spectrometer)，光谱范围0.1-2.5THz，分辨率2GHz。该系列太赫兹时域光谱仪包括：飞秒激光器、太赫兹发生器、太赫兹探测器、延迟线、电子元件、操作软件。ModelFiber coupledTHz time-domain spectrometerTHz time-domain spectrometerApplicationtransmission and reflection measurementstransmission measurementMain parametersspectral range0.1 - 2.5THz0.1 - 2.5THzspectral resolution2GHz2GHzS/N-ratio at 0.4 THz10001000minimum scan time0.5s0.5sTHz beam diameter12mm12mmComponentslaser excitationfemtosecond fiber laser with 1060nm wavelengthfemtosecond fiber laser with 1060nm wavelengthTHz emitter modulefiber-coupled PCA with THz lensPCA-40-05-10-1060-c-femitter antenna with THz lensPCA-40-05-10-1060-a-lTHz detector modulefiber-coupled PCA with THz lensPCA-44-06-10-1060-c-fdetector antenna with THz lensPCA-44-06-10-1060-a-ldelay linedelay line with 1ns time delaydelay line with 1ns time delayelectronic componentspulse generator + lock-in detectionpulse generator + lock-in detectionsoftwareLaptop with spectrometer software T3DSLaptop with spectrometer software T3DSotherssignal amplifier, DAQ-Boardsignal amplifier, DAQ deviceOptions sample holdersubstrate holder with manual XY-movementof 50 mmsubstrate holder with manual XY-movementof 50 mmlensPTFE-lens including mount and postaspheri silicn substrate lenses, PTFE-lens

这款宽带激光反射镜,HR Broad Band mirrors是欧洲进口的宽波段激光反射镜,非常适合宽范围波段的激光反射应用，比较适合大于关于中心波长10%范围浮动的激光的高反应用，比如，对用中心波长为800nm的激光，HR@800nm, 这种宽带激光反射镜就比较适合反射的激光范围为750-850nm 甚至更大的范围。 这种宽带激光反射镜,宽波段激光反射镜常常用于腔外激光束的操作应用，对激光束的反射要求非常严格，不允许存在透过激光的问题产生，常常使用这种宽波段激光反射镜 ，但是它只适合固定的入射角(常用45度）。宽带激光反射镜,宽波段激光反射镜采用了离子束溅射技术（Iom Beam Sputtering, IBS)或电子束蒸发技术进行镀膜，这些镀膜技术非常成熟。 基片尺寸公差：+0/-0.1mm 基片波前畸变：基片表面质量：20/10 SD 40/20SD(曲面） 镀膜粘附性和耐久性：Per MIL-C-675A 净孔径： 90% 镀膜反射率：R99% @ 0o Rave99% @ 45o 激光损伤阈值:2-3J/cm2 for 10 ns pulses @1064nm宽带激光反射镜,宽波段激光反射镜垂询格式： 如下是镜片的标准参数格式，请阁下仿照如下格式把您对镜片及其镀膜的要求发邮件给我们，我们会及时回复报价。Substratematerial 基片材料 CaF2, FS, ZnSe, UVFS, IRFSShape 形状Rectangular Round （方形还是圆形）Dimensions 尺寸 mm Thickness 厚度 mm Type 类型Other Flat/Flat Plano-Concave Plano-Convex Radius of Curvature (ROC) 曲率半径（对曲面镜而言） for curved substrates only eg ROC1=-50mm ROC2=+1000mm Surface figure L/4 L L/2 L/8 Surface quality 表面质量20/10 40/20 60/40 Parallelism error 平行误差10arcsec 1arcmin 3arcmin Wedge No wedge 30arcmin 1deg 2deg 3deg Coatings on Side1 S1面镀膜例如. PR(R=80+/-2%)@1064nmCoatings on Side2 S2 面镀膜例如. AR(R0,2%)@1064nmAngle of incidence (AOI) 入射角Comments 评论订购数量

透射反射探头是最新的单程透射探头和双程透射反射光纤探头，与任何光谱仪和光度计兼容使用，透射反射探头用于工业和实验室的反应监测。透射反射探头功能应用 可以在从紫外到中红外光谱范围内使用， 用于液体中的远距离透射光谱。灵活强大，可应用在恶劣环境下的工业应用，如反应监测，PAT，结晶生成和筛选， 用于生物制药分析和生物燃料的开发和生产。

反射镜有超过350种镜片可供选择；设计入射角为0°或45°，覆盖波段从190nm 到 2000nm 提供金、银、铝等金属镀膜，用于提高反射率、起保护作用等；使用BK7或UVFS材料，能够实现λ/10表面质量的镜片；提供具有高反射率的镀膜镜片,如MaxMirror 和MaxBRlte 能在宽波段内实现大于98%的反射率。若是单面镀膜,会在未镀膜面用箭头指向镀膜面,方便使用。飞秒激光反射镜:具有宽带、高反射率、高损伤阈值和低群延迟色散的特点，应用于飞秒激光器。飞秒激光反射镜有以下两个型号，分别对应740-860nm,720-900nm两个波段，不同尺寸可选。美国CVI laser optics 设计和生产紫外到近红外波段的高性能光学器件，主要应用在激光的光束调节和传输方面，在业内有很高的知名度。 主要生产包括球面镜，平面镜，偏振片，棱镜和波片。 还提供一系列用于超快激光应用的低色散和色散补偿光学元件。

测量反射光的比色皿 ①外形尺寸：Φ34×25 ，容积：12.0ml； ②外形尺寸：Φ50×30，容积：32.0ml； ③外形尺寸：Φ60×40.5 ，容积：73.0ml。

双线激光反射镜又名双激光谱线反射镜,是英文Dual Laser Line reflecting mirrors 的翻译。双线激光反射镜用于在两个不同的波带上实现进行高反或高透应用，入射角一般为45度。百分之百进口，质优价廉。双激光谱线反射镜采用多层镀膜，当可以在两个激光波长上实现最高的激光反射率。双线激光反射镜采用了离子束溅射技术（Iom Beam Sputtering, IBS)或电子束蒸发技术进行镀膜，这些镀膜技术非常成熟，并且采用多层镀膜技术可以保证双线激光反射镜高功率应用。双激光谱线反射镜,Dual Laser Line reflecting mirrors 技术指标基片尺寸公差：+0/-0.1mm基片波前畸变：基片表面质量：20/10 SD 40/20SD(曲面）镀膜粘附性和耐久性：Per MIL-C-675A净孔径： 90%镀膜反射率：R99,5% @ 0o Rs99,3% and Rp98,5% @ 45deg激光损伤阈值:3-5J/cm2 for 10 ns pulses @1064nm进The measured transmission curve for dual wavelength HR coating (HR @ 515+1030 nm)双线激光反射镜,双激光谱线反射镜,Dual Laser Line reflecting mirrors 询问服务：请阁下根据如下格式选择和填写您需要的镜片和镀膜参数，然后复制后直接通过Email发送给我们，您会收到及时的报价回复。Substrate material 基片材料 Shape 基片形状RectangularRound 请选择圆形或方型Dimensions 尺寸mm 如果是圆形就填写直径大小Thickness 厚度mm Type 类型Plano-ConcavePlano-ConvexOtherFlat/Flat如果您选择曲面镜片，请填写曲率半径 eg ROC1=-50mm ROC2=+1000mmSurface figure L/4 L L/2 L/8Surface quality 20/1040/2060/40Parallelism error10arcsec1arcmin3arcminWedgeNo wedge30arcmin1deg2deg3degCentral wavelenghs: eg. 1064nm+532nm Angle of incidence (AOI)deg Comments

单点反射测量支架是一个探头支架，用于厚度达150mm的光学层和其它基底的反射测量。 这一探头支架适于固定直径达6.35mm的光学探头和其它取样设备，可以在一个不锈钢支柱上上下滑行，调节高度可达63.5mm。 反射台是电镀台面，表面刻有同心圆以确定直径，用于放置圆形样品。 规格 尺寸（基座）: 直径为152.4mm 尺寸（样品区）: 直径为101.6mm* 重量: 620 g 高度: 垂直可调高度63.5mm *指带有同心圆刻度的区域，用户也可利用整个基座的区域。

用于反射光谱的参考反光镜订货信息：产品描述部件编号用于反射光谱的参考反光镜N1010504在对珀金埃尔默和非珀金埃尔默的反射附件进行镜面反射校准时，需要使用这种反光镜。这种带有氟化镁涂层的铝制反光镜是一种次级标准品并按照GLP规定在250-2500 nm的波长范围内进行了校准；本品也包括关于进行%RC反射校正所需的便捷转移介质的光谱数据。

IS-RFLT8C-50反射积分球IS-RFLT8C-50是8°反射积分球（高灵敏度积分球；辐射积分球；反射/透射积分球；高均匀度积分球；紫外均匀积分球），采用的是反射测量的8/d的标准，8°角照明，散射接收。在相对于8°角光源对阵的方位上，设置光陷阱或者标准反射片，从而实现漫反射和全反射的测量。IS-RFLT8C-50积分球的特点是紧凑的尺寸和耐用的设计，所有的IS-RFLT8C-50积分球有两个SMA-905接口，光输入端有一个用于在光纤接入积分球之前校正光纤的8°角接口，光输出端口与输入端口成90°角（用于连接光谱仪）。另配有一个圆柱形的吸收盖，内部涂有黑色的吸光材料（用于吸收镜面反色光）。这个嵌入件刚好放入一个与积分球顶部成-8°角的接入孔中。每一个积分球都可与光谱仪一起组合成一个系统，用于测量置于积分球的采样口区域内的平面样品的综合反射率。这些积分球可测量杂色的样品及不透明或者高指向性的样品。产品特点? 光纤光学积分球：测量表面总的整体反射率? 积分球采样口直径：9.6mm? PTFE制造，可见光反射率98%。? 直径可选：38mm、50mm。

透反射偏光显微镜配件是进口高级透反射偏振光显微镜，具有入射光和透射光照明系统，提供40X-1000X的放大倍率，特别适合实验室科研等高级应用。 透反射偏光显微镜配件特点 具有4x,10x,40x,100x物镜配置，放大40-1000倍。 可添加相机组成显微成像系统。 偏光器可旋转，0位置可调。 * 样品载物台：360度可旋转可定心样品台，170mm直径，分辨率6' ,45度检查杆， * 日光滤光片45mm直径，防尘，2个12V/100W备用长寿命灯泡 透反射偏光显微镜配件配置 Strain-Free ICO2 PLAN objectives infinity corrected 5x/0.12, WD 15.5mm, CC - 10x/0.25, WD10.0mm, CC – 20x/0.4, WD 4.30mm, CC 0 50x/0.75, WD 0.32mm, CC 0 100x/0.8, WD 2.00mm, CC 0 40x/0.65, WD 0.54mm, CC 0.17 100x/1.25, WD 0.13mm, CC 0.17 孚光精仪是全球领先的进口科学仪器和实验室仪器领导品牌服务商，产品技术和性能保持全球领先,拥有包括透反射偏光显微镜在内的全球最为齐全的实验室和科学仪器品类，世界一流的生产工厂和极为苛刻严谨的质量控制体系，确保每个一产品是用户满意的完美产品。我们海外工厂拥有超过3000种仪器的大型现代化仓库，可在下单后12小时内从国外直接空运发货，我们位于天津保税区的进口公司众邦企业（天津)国际贸易公司为客户提供全球零延误的进口通关服务。更多关于透反射偏光显微镜价格等诸多信息，孚光精仪会在第一时间更新并呈现出来，了解更多内容请关注孚光精仪官方网站方便获取！

高斯反射镜是一种可变反射率反射镜,也是一种梯度反射率镜,Gaussian mirror, 这种高斯反射镜可以有效改善激光光束质量。高斯反射镜和变反射率镜的反射率是位置的函数，镜片反射率随着镜片上位置不同而不同。高斯反射镜能够在不稳腔中提供更加的激光模式，控制实现基模振荡而消除高阶模。高斯反射镜和梯度反射率镜能够改善输出激光的光束质量，特别是在低放大倍率情况下这种光束质量的改变更为明显。高斯反射镜提供的锥形反射率分布可以减少光场分布中的振荡，从而减少高功率激光应用中的光学损伤。高斯反射镜和变反射率镜典型的反射率分布是镜片中心的反射率最大，反射率从镜片中心到边缘依次按函数关系减低。 高斯反射镜和梯度反射率镜参数变反射率镜材料：熔炉石英，UVFS或BK7梯度反射率镜类型：平/平镜片, PCV, PCX高斯反射镜直径：19.05mm +0.0, -0.15 mm变反射率镜厚度：6 mm +/-0.1 mm梯度反射率镜平整度：&lambda /10高斯反射镜光洁度：20-10 scratch & dig变反射率镜平行度：10 arc sec梯度反射率镜净孔径：90%变反射率镜镀膜损伤阈值：10 J/cm2 @ 1064 nm for 10 ns pulses高斯反射镜,变反射率镜,梯度反射率镜询问服务：请直接在如下的询问栏里填写您的要求，然后复制后Email给我们，您会收到及时的报价回复。 Material 材料 Dimensions, mm尺寸 Thickness, mm厚度 Type类型PCXPCVFlat/FlatMeniscus Radius of Curvature, mm 曲率半径 Center wavelength, nm 中心波长 Wedge 倒角 Ro, % 中心反射率 Wm, mm Gaussian order, k 高斯级数 Quantity

IR衰减全反射和漫反射附件的详细资料： 详情请联系吴小姐：15080317079 衰减全反射和漫反射附件满足您所有采样需要 通用衰减全反射 (UATR) 附件 适用于Spectrum 400/100/One/65 分光计 通用ATR是一款优秀的附件，可用于固体和液体的分析。UATR的压力臂通过让金刚石晶体与样品良好接触来产生高质量谱图。压力臂使指示器保证结果的高度可重复性。 特色和优势 Ø 自动识别&mdash &mdash 旦附件放置到样品仓中，通用ATR模块及其序列号和ATR晶体类型(1, 3, 或9反射)就能立即被识别出来，并且系统适应性检查会随即启动。仅限于Spectrum 400/100/One Ø 自动优化&mdash &mdash 根据顶板的不同自动优化光学器件。仅限于Spectrum 400/100/One Ø 零校正，零设置&mdash &mdash 旦Spectrum 100样品仓锁住，该附件即随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件一旦安装完毕就成为了设备的组成部分 Ø 标准情况下配备有带压力传感器的压力臂挥发物盖(仅限于9反射UATR) 金刚石/硒化 UATR 配备1反射 顶 板 和压力臂 L1250050 配备3反射 顶 板 和压力臂 L1250051 配备9反射 顶 板 和压力臂 L1250052 金刚石/KRS-5 UATR 配备1反射 顶 板 和压力臂 L1250053 Ge/Ge UATR 配备1反射 顶 板 和压力臂 L1250054 注意:UATR附件需.Spectrum v.6及以上版本支持 UATR附件用备用/替换件顶板和耗材 UATR &ndash 1反射 金刚石顶板&ndash ZnSe 1 L1250240UATR &ndash 3反射 金刚石顶板&ndash ZnSe 1 L1250241 UATR &ndash 9反射 金刚石顶板&ndash ZnSe 1 L1250242 UATR &ndash 1反射 金刚石顶板&ndash KRS-5 1 L1250046 UATR &ndash 1反射Ge/Ge顶板 1 L1250048 UATR 0.5mm套管 1 L1202049 UATR 6.0mm ATR套管 1 L1202050 UATR 锥形套管 1 L1201980 UATR 3.0mm样品定位板 1 L1202023 UATR 7.0mm样品定位板 1 L1202024 Miracle ATR附件 单反射ATR附件用来分析高吸收固体，半流体，和液体样品。小型圆形晶体是采样板构造的最大特点，它能实现对微量(5&mu L及以上)样品的可靠分析。 固体材料能够和晶体接触良好，从而保证了高质量、可重复的谱图。附件还配备有千分尺控制的压缩钳，挥发物品盖，清洁工具和一系列的晶体材料。 Miracle单反射ATR 金刚石适用于Spectrum RX/BX L1272239 ZNSE适用于Spectrum RX/BX L1272107 ZNSE适用于Spectrum 400/100/One/65 L1272126 GE适用于Spectrum 400/100/One/65 L1272127 ZNSE适用于Spectrum GX L1272103 GE适用于Spectrum GX L1272104 漫反射附件 是不透明样品和强散射样品测量的理想选择。该漫反射附件为药品、食品、肥皂粉末、煤炭、泥土、纸片、镀有涂层的表面、泡沫塑料和催化剂等不透明和强散射固体样品的分析提供了方便灵敏的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，漫反射附件及其序列号就能立即被识别出来 Ø 系统适应性检查&mdash &mdash 包括噪声，通量和污染情况的检查，当附件插入时或得到指令时，系统就会随即启动进行检查 Ø 自动优化&mdash &mdash 对于粉末、硅碳板或金刚石杵等的所有采样方法，样品位置都能被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作。 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 配备多功能样品支架，2个大容量样品杯和2个微量样品杯，25个金属镀层研磨垫，25个金属镀层带支架的研磨杵，和一瓶30g KBr粉末。 用于 Spectrum 400/100/One L1200351 漫反射附件耗材 大容量杯 1 L1201654 微量杯 1 L1201655 多功能样品支架 1 L1201865 金属镀层研磨垫 100 L1275106 金属镀层研磨杵 100 L1275105 硅碳磨研磨垫 100 L1271021 金刚石研磨杵 100 L1275102 水平ATR附件 PerkinElmer水平ATR (HATR)附件基于衰减全反射原理，能为各种常规透射技术难以检测的固体、液体和糊剂样品的分析提供快速可靠的方法。 特色和优势 Ø 自动识别&mdash &mdash 当附件放入样品仓时，HATR附件及其序列号就能立即被识别出来，并且系统适应性检查会随即启动 Ø 自动优化&mdash &mdash 无论是何种种类的晶体，光路都能够被自动优化 Ø 零校正，零设置&mdash &mdash 旦样品仓锁住，该附件就随时可用，无需任何校正操作 Ø 集成化&mdash &mdash 插件模块设计意味着该附件安装之后就成为了设备的一个组成部分 Ø 标准情况下配备有带压力传感器的压力臂(仅限于平顶板型) 与配备ZnSe 45° 晶体、粉末压片机和挥发物盖的平顶板一起提供。 适用于 Spectrum 400/100/One L1200351 HATR附件配备有 ZnSe平顶板和压力臂 L1200311 HATR附件配备有 ZnSe槽型顶板 L1200312 HATR附件用备用/替换件顶板和耗材 HATR ZnSe 45° 平板 1 L1200313 HATR ZnSe 45° 槽形板 1 L1200314 HATR Ge 45° 平板 1 L1200333 HATR Ge 45° 槽形板 1 L1200334 HATR 压力臂套件 1 L1200321 粉末压片机 1 L1201944 挥发物盖 1 L1205436