高功率光纤飞秒激光器用于微处理的新型高功率飞秒激光器。其紧凑的尺寸使其更易于使用和集成到现有系统中。它在高达 1 MHz 的重复频率下提蕞大能量为 30 μJ 的脉冲,在突发模式下提供高达 100 μJ 的脉冲。用户可配置的突发模式为消费电子产品、集成光子学和显示器制造行业带来了新功能。高功率激光器蕞重要的部分是飞秒振荡器。它是我们每个系统的核心。该飞秒激光器是基于Fluence独特的全光纤、无SESAM振荡器技术,该振荡器经过测试,可在40 g振动下运行。此外,它还在超过 50 o C 的广泛温度范围内进行了评估。振荡器与光纤前置放大器一起形成一个不受错位影响的整体结构。这定义了 该系统的稳健性。全光纤设计基于真正的全光纤、无SESAM的Fluence振荡器使用寿命长前所未有的稳定性缩小尺寸标准 270 fs – 默认 8 ps 脉冲持续时间调谐默认包含用于过程增强的突发模式Jasper Flex FlexMaximum average power 蕞大平均功率30 W (ask for higher 30 W (可要求更高)Maximum pulse energy 蕞大脉冲能量30 μJ up to 1 MHz (ask for higher) Maximum burst energy 蕞大爆发能量100 μJ @ 200 kHz, 1030 nmBase retitinorntne 基本重复率20+2 MHz两级重复率调谐可通过控制软件进行选择1- 20 MHz, internal repetio rate Single Pulse - 1MHz, realized with bil-in pulse picker 脉冲持续时间270 fsF WHM ( 250 fs typicall)脉冲持续时间调谐 270 fs - 8 ps, software-controlLED ( 270 fs - 20 ps optional)中心波长1030土5nm可选波长输出With Harmonic Generation Module (HGM) 515 mm.343 nm, 258 nm (awailiale upon request)极化Linar, vrticical光束质量 M² :13( 1.15 tyicicl)输出光束腰径 1/e² 2.0土0.5 mm (ask for ather) 突发模式,用于工艺增强Indluded6U 19*机架式冷水机组Induded外部门控触发器Indluded外部模拟功率调制Indluded激光控制软件Induded每当需要高功率和高脉冲能量同时保持非常短的脉冲持续时间时,该飞秒激光是正确的选择。这些应用包括:DISPlay repair 显示器维修Micromachining 微加工Polymer cutting 聚合物切割Surface structuring 曲面结构Ophthalmology 眼科学pumping of Optical Parametric Amplifiers 光参量放大器的泵浦Pump and probe spectroscopy 泵浦和探针光谱FIBS sample preparation for AFM 用于 AFM 的 FIBS 样品制备Three-photon excited fluorescence 三光子激发荧光更多详情请联系昊量光电/欢迎直接联系昊量光电关于昊量光电:上海昊量光电设备有限公司是光电产品专业代理商,产品包括各类激光器、光电调制器、光学测量设备、光学元件等,涉及应用涵盖了材料加工、光通讯、生物医疗、科学研究、国防、量子光学、生物显微、物联传感、激光制造等;可为客户提供完整的设备安装,培训,硬件开发,软件开发,系统集成等服务。
留言咨询