高频介电常数介质损耗测试仪

LTS1500 光损耗测试仪光纤通讯 Loss Test Set-LTSThe FTE-4000 TTI Hand Held Variable Optical Attenuator is available in two models, with 40 dB attenuation level or 80 dB attenuation level to meet single mode testing requirements. Like the rest of the FTE line, the VOA has an onboard help feature. The FTE-4000 has a built in output power monitor to assist in setting the appropriate attenuation levels and a sweep mode which can scan the attenuation across desired levels. It is rugged with a splash proof housing with a highly protective boot. The FTE-4000 can assist in the testing of system budget compliance, balancing transmitter power and adjusting receiver attenuation settings.Features? Integrated Power Meter? Up to 80 dB Attenuation? Typical Insertion Loss 2dB (40dB Model)? Remotely Program Sweep Settings? Adjustable step sizes? USB PC Interface w/Remote Operation? Absolute/Relative Attenuation Settings? Calibrated at 1310/1550? Sealed Rugged Case? Lowest Cost Hand Held VOA? 4” Color DisplayOrdering InformationFTE-4000-4040 dB Variable Optical AttenuatorFTE-4000-8080 dB Variable Optical AttenuatorFTE-4000 SpecificationsAttenuation RangeFTE-4000-4 2 to 40dBFTE-4000-8 4 to 80dBWavelength Range1310, 1550 nmResolution.01 dBUncertainty+/- 0.5 dBRepeatability+/- 0.1 dBInsertion Loss2 dBReturn Loss50 dBMax Input Power27 dBmGraphical Display4 in Color TFTDimensions7.75 x 4.5 x 2.25 inchesWeight2 lbsBatteryRechargeable NiMH - 6 hours operating timePower100-240 universal US, GB, EU, AU MainsEnvironmental Operation-10°C to + 40°CAccessories IncludedUniversal power supply. FC and SC adaptors,CertSof VI Software, USB Cable and Manual

JKZC-YDZK50M型1000℃高温精密阻抗分析仪 关键词：阻抗，高温，导纳图，扫描,50MHZ JKZC-YDZK50M型1000℃高温精密阻抗分析仪是一款兼容高温功能的精密阻抗分析仪，是一款能够应用于先进材料测试的多功能复合型精密阻抗分析仪，该阻抗分析仪可以兼容多种高温夹具，可以测试粉末，液体，块体等多种不同类型的样品。常温下测试数据丰富，高温下测试数据稳定，无漂移。是一款兼顾中高端频率的精密阻抗分析仪。在陶瓷及先进材料生产中和科研院校广泛使用。一、主要应用：1、先进材料测试：高温及常温介电常数、弹性常数等C-V特性 2、高温及常温无源元件测试：电容器、电感器、磁芯、电阻器、压电器件、变压器、芯片组件和网络元件等的阻抗参数评估和性能分析。3、高温及常温半导体元件：LED驱动集成电路寄生参数测试分析；变容二极管的C-VDC特性；晶体管或集成电路的寄生参数分析4、高温及常温其它元件：印制电路板、继电器、开关、电缆、电池等阻抗评估5高温及常温介质材料：塑料、陶瓷和其它材料的介电常数和损耗角评估6、高温及常温磁性材料：铁氧体、非晶体和其它磁性材料的导磁率和损耗角评估7、高温及常温半导体材料：半导体材料的介电常数、导电率和C-V特性二、主要特点：1、高温及常温进行先进材料测试阻抗各参数测试：谐振频率Fs、反谐振频率Fp、半功率点F1与F2、导纳Gmax、静电容C0、动态电抗R1、动态电容C1、动态电感L1、自由电容CT、自由介电常数、机械品质因素Qm、机电耦合系数Keff、Kp、K31、K33等2、多种探头满足压电陶瓷，液体，及粉末相关电学性能测试3、高温夹具及常温测试装置，设计精巧灵活，测试数据可靠4、50MHZ高频阻抗频率满足高端测试需求 5、1000摄氏度高温条件下测试数据稳定无漂移，曲线与温度对应6、软件功能丰富，数据即读取，方便快捷三、主要技术参数：1、频率范围：20HZ-50MHZ2、温度：室温-1000℃3、阻抗参数：谐振频率Fs、反谐振频率Fp、半功率点F1与F2、导纳Gmax、静电容C0、动态电抗R1、动态电容C1、动态电感L1、自由电容CT、自由介电常数、机械品质因素Qm、机电耦合系数Keff、Kp、K31、K33等4、电极材质:铂铱合金(样品有无电均可以测试)同轴屏蔽层5、上电极 直径1.6mm球头电极，引线带同轴屏蔽层6、下电极： 直径26.8mm平面电极，引线带同轴屏蔽层7、保护电极： 消除寄生电容、边界电容对测试的影响8、电极干扰屏蔽： 电极引线带同轴屏蔽，样品平台带屏蔽罩9、夹具升降控制： 带程序和手动控制，可更换夹具的电动升降装置10、热电偶: 双探头11、无电极样品尺寸 : 直径小于40mm，厚度小于8mm12、带电极样品尺寸: 直径小于26mm，厚度小于8mm13、软件功能：自动分析数据，可以分类保存，样品和测量方案结合在一起，生成系统所需的实验方案，输出TXT、XLS、BMP等格式文件14、测量方案 提供灵活、丰富的测试设置功能，包括频率谱、阻抗谱、介电谱及其组合15、接口方式：包括Keysight\WayneKerr\Tonghui等多种LCR接口，16、外形尺寸: L360mm*W370mm*H510mm17、净 重: 22KG

FTE5000 损耗测试仪 带ORL和视频探头The FTE-5000 combines four functions for testing optical networks together in one unit. It brings together a -55dB ORL meter, power meter, laser source and video scope capability with IEC61300-3-35 method “B” Pass/Fail End face Grading Map (probe sold separately). The FTE-5000 is a full featured ORL Loss Test Set. It has 4” super bright color touch screen display with large easy to read characters. It performs optical return loss measurements to -55db at up to three wavelengths and is an automated loss test set with dual or triple wave Light sources. The power meter uses an InGaAs detector which is calibrated at 850,1300, 1310, 1490, 1550 and 1625nm, with a dynamic range of -77dBm. These units are available in single, dual, triple or quad wavelength configurations and displays measurements up to three wavelengths at one time. In the Autotest mode, the master unit changes wavelengths at a fixed rate and informs the slave unit of the wavelength currently being measured. Use this method to test up to three wavelengths at a time and store the loss measurements for each of the lasers fired during the test. Up to 5000 tests may be stored and recalled via the unit’s USB port. Use TTI’s CertSoft PC application software for downloading stored data and organizing the information or use the Android Bluetooth virtual instrument application for remote operation. The information from OTDR, LTS, ORL and video scope may be combined to offer a comprehensive report for all of your network testing needs. The FTE-5000 also includes a video scope (probe sold separately). Use the video scope to ensure the integrity and cleanliness of the connectors being tested. Use the modulation feature to perform fiber identification function. The power meter will identify modulated signals at 270, 1000 and 2000 Hz produced a modulate light source. Features?Optical Loss/ORL Tester?ORL Measurement Range to -55 dB ?PM with -77 dBm Dynamic Range ?IEC61300-3-35 method “B” Video Scope (Probe Sold Separately)?Auto Test Up To Three Wavelengths ?Automated Loss Measurements ?Auto Wavelength Switching ?Universal PM and LS Adapters?Storage for 5,000 Test ?Bright Color Display?Rechargeable NiMH Batteries?USB Interface ?Free Report Software ?On-Board Help FeatureOrdering InformationFTE-5000-8513 LTS with 850/1300nm Light Source and Video Scope (Probe Sold Separately)FTE-5000-1315LTS with 1310/1550nm Light Source and Video Scope (Probe Sold Separately) FTE-5000-345LTS with 1310/1490/1550nm Light Source and Video Scope (Probe Sold Separately)FTE-5000-QUADLTS with 850/1300/1310/1550nm Light Source (No Video Scope Capability)VIS300Video Probe for use with FTE-7000, FTE-1700 and FTE-5000 seriesGeneral SpecificationsDisplay4 in Color TFTStorage Locations5000Battery/Operating Time4 AA Rechargeable NiMH / 6 hrsPower Requirements Wall Mount, Universal 100-240V 47-63 Hz 9 VDC Center Positivewith, US, UK, Continental Europe, and Australian PlugsOperating Temperature Range -10 to 45 CDimensions(w/o rubber boot ) 7.62” L x 3.88” W x 1.56” H (194mm L x 99mm W x 40mm H) Weight 0.52 KgAccessories ProvidedFC, ST, SC adaptors for both Power Meter and Light Source, rubber boot, battery, power supply/charger, manual and software on CD and USB cable Power Meter SpecificationsDetector TypeInGaAsConnector Type 2.5mm InterchangeableDynamic Range+5 to -77dB (CATV - +25 to -57dB)Auto Test Range0 to -40dBCalibrated Wavelengths 850,1300,1310,1490,1550,1625nmUnits of MeasurementdBm, dB, mW, μW and nWPower Measurement Uncertainty± 0.18 dB under reference conditions, ± 0.25 dB from 0 to -65 dBm,± 0.35 dB from 0 to +5 dBm and from -65 to -77 dBmUnits of Measurement dBm, dBResolution.01 dBModulation Modes DetectedCW, 270 Hz, 1000 Hz, 2000 HzLight Source SpecificationsFiber TypeSingle Mode, Multimode Wavelengths Available850,1300,1310,1490,1550 and 625 nm ±20nm as Unit is Equipped Output Power0 dBm, 1mw (-3dBm @ 1625nm)Output Stability± .05 dB / 24 hrs @ constant temp,, ± .02 dB/C temperature coefficientLaser Safety ClassificationClass I Safety Per FDA/CDRH and IEC-825-1 RegulationModulation ModesCW, 270 Hz, 1000 Hz, 2000 HzSpectral Width3nm typ.ORL MeterOptical Return Loss Dynamic Range0-55 dBORL WavelengthsSM Source WavelengthsOptical Return Loss Accuracy± 1dB @ -40db reflectionResolution0.01 dB