nanoViper 手拧接头 6041.5240
nanoViper 手拧接头最大化纳米液相色谱(LC)的性能和方便性的Thermo Scientific™ nanoViper™ 手拧接头。几乎为零死体积连接,确保最佳的分离效率。预装配和手指拧紧,nanoViper手拧接头能够轻松,免工具的仪器设置和配置,防止过紧。高压测试,这些接头提供UHPLC兼容性高达1000巴(14500磅)。nanoViper 手拧接头订货信息:TubingnanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 20 μm, Length 350 mm6041.5240nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 20 μm, Length 550 mm6041.5260nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 20 μm, Length 650 mm6041.5275nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 50 μm, Length 350 mm6041.5540nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 50 μm, Length 550 mm6041.5560nanoViper UHPLC Fingertight Fitting incl.Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 50 μm, Length 650 mm6041.5575nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 75 μm, Length 250 mm6041.5730nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 75 μm, Length 550 mm6041.5760nanoViper UHPLC Fingertight Fitting incl. Fused Silica Capillary with PEEK Sheath for 10-32 Fitting, ID 75 μm, Length 650 mm6041.5775Sample Loops1 μL Sample Loop with nanoViper Fittings Connection6826.24015 μL Sample Loop with nanoViper Fittings Connection6826.240520 μL Sample Loop with nanoViper Fittings Connection6826.242050 μL Sample Loop with nanoViper Fittings Connection6826.2450125 ul Dionex UltiMate 3000 Pulled Loop Autosampler WPS-3000(T)PL RS6826.241210 μL Dionex UltiMate 3000 Pulled Loop Autosampler WPS-3000(T)PL RS6826.2410 nano LC Made EasyEverybody who has ever worked with capillary and nano LC knows that one bad connection can mean the difference between quality results and a failed experiment. The typical low flow rates in these applications make them exceptionally sensitive to dead volumes. Even when the nut, ferrule, PEEK™ sleeve, and column have been connected dead-volume free, care must be taken to not over tighten and damage the fused silica or, worse, the separation column.nanoViper™ is the new, fingertight connection system for nano LC connections which eliminates the assembly of PEEK sleeve connections. It is preassembled to maximize ease-of-use, and is fingertight, making over tightening impossible. The nanoViper fitting is capable of withstanding pressures up to a 1000 bar and is compatible with third party valves and unions.nanoViper allows you to configure your nano LC application completely tool free.That is truly nano LC made easy!Zero-dead-volume UHPLC fingertight nano LC connectionsnanoViper connections are standard on RSLCnano accessories and Acclaim® PepMap™ RSLC nano columnsnanoViper—nano LC made easy SpecificationsConnection principleFingertightMaximum pressure1000 bar (14,500 psi)Tubing typeFused SilicaOuter diameter0.79 mmTemperature compatibility120 °CWetted materialFused Silica, PEEKProduct Data SheetsThermo Scientific Dionex nanoViper Fingertight Fitting System