产品特点:4.0 mm ID 顶部钻孔 Uniliner 进样口衬管4.0 mm ID Drilled Uniliner Inlet Liner with Hole near Top订货号:21471适用于 Bruker/Varian GCs equipped with 1177 inlets型式:钻孔Uniliner(顶部附近的孔)衬管ID:4.0毫米类似于:Restek 21470(已停产)长度:78.5毫米外径:6.3毫米惰性化处理:标准材料:硼硅酸盐玻璃
产品特点:3.5 mm ID 顶部钻孔 Uniliner 进样口衬管3.5 mm ID Drilled Uniliner Inlet Liner with Hole near Top适用于 Bruker/Varian GCs equipped with 1078/1079 inlets订货信息:3.5 mm ID Drilled Uniliner Inlet Liner with Hole near TopCatalog #LengthODDeactivationMaterialUnits2497554 mm5.0 mmStandardBorosilicate Glass5-pk.24975-214.554 mm5.0 mmSiltekBorosilicate Glass5-pk.
产品特点:4.0 mm ID 顶部钻孔 Uniliner 进样口衬管4.0 mm ID Drilled Uniliner Inlet Liner with Hole near Bottom适用于 Agilent GCs equipped with split/splitless inlets订货信息:4.0 mm ID Drilled Uniliner Inlet Liner with Hole near BottomCatalog #LengthODDeactivationMaterialUnits2077178.5 mm6.3 mmStandardBorosilicate Glass5-pk.20771-214.578.5 mm6.3 mmSiltekBorosilicate Glass5-pk.
产品特点:Topaz 4.0 mm ID Drilled Uniliner 进样口衬管,顶部有孔Topaz 4.0 mm ID Drilled Uniliner Inlet Liner with Hole near Top订货号:23311适用于配备分流/不分流进样口的Agilent GCTopaz GC进样口衬管具有革命性的技术和惰性,可为您提供更高级别的True Blue性能:停用 - 令人难以置信的低分解,可实现准确,精确的低水平GC分析。再现性 - 无与伦比的制造控制和QC测试,可在复合材料类别中实现卓越的可靠性。生产率 - 无与伦比的清洁度,最大化GC正常运行时间和实验室吞吐量。型式:Drilled Uniliner(顶部有孔)衬管ID:4.0mm类似:Restek 23311.1(已停产),23311.5(已停产),23311.25(已停产)长度:78.5mm外径:6.3mm材料:硼硅酸盐玻璃
产品特点:4.0 mm ID Drilled Cyclo Uniliner 进样口衬管顶部和顶锥附近有孔4.0 mm ID Drilled Cyclo Uniliner Inlet Liner with Hole near Top and Top Taper适用于 Agilent GCs equipped with split/splitless inlets订货信息:4.0 mm ID Drilled Cyclo Uniliner Inlet Liner with Hole near Top and Top TaperCatalog #LengthODDeactivationMaterialUnits2298078.5 mm 6.3 mmStandardBorosilicate Glass5-pk.22980-214.578.5 mm6.3 mmSiltekBorosilicate Glass5-pk.
产品特点:Uniliner 衬管Uniliner Liner● 用于1/4英寸填充进样口转换● 减少溶剂尾矿。● Versatile-0.53 mm ID版本可用于直接(DI)或柱上(OC)注入模式。● 采用柔和的锥形密封柱和减少死体积在直接注射模式。● 有多种设计可供选择。柱上进样只能使用0.53 mm内径色谱柱进行,因为26号针头不适合0.32 mm内径色谱柱的孔,或者装入Uniliner衬管锥度。* DI =直接进样,OC =柱上进样注意:Uniliner衬管必须与Uniliner衬管适配器(cat。#20310或20311)一起使用,用于1/4英寸进样端口。 除非您购买替换的Uniliner衬管,否则请在订购Uniliner衬管时包括衬垫适配器。订货信息:Uniliner LinerCatalog #Product NameBenefits And UsesFits Column IdUnits20305Uniliner Linerlarge buffer volume chamber: 85 mm long, for injections ≤4 μL 0.53 mm DI or OC5-pk.20320Cyclo-Uniliner Linerfor active, dirty samples0.32 and 0.53 mm DI only5-pk. 20316Open-Top Uniliner Liner (packed with wool)0.32 and 0.53 mm DI only5-pk.20310Uniliner Liner Adaptor for injection ports 8 cm ea.20311Uniliner Liner Adaptor for injection ports 8-15 cmea.202341/4" Ferrules for Uniliner Liner Adaptor5-pk.