SC-CSRS 300 盐转换器阳离子自再生抑制器

Dionex SC-CSRS 300 盐转换器阳离子自再生抑制器

通过使用 Thermo Scientific™ Dionex™ SC-CSRS™ 300 盐转换器阳离子自再生抑制器来将弱电离有机胺和铵根转化为用于电导检测的高度离子化甲磺酸 (MSA)，从而提高被分析物响应，并且将线性范围扩大三倍之多。提供 4 mm 规格（与 4 mm 和 5 mm 柱配合使用）和 2 mm 规格（与 2 mm 和 3 mm 柱配合使用），这款易于使用的自再生抑制器不需要再生液。

描述

针对胺、铵、以及第I、II族阳离子的强化性能

• 将线性范围最多扩大三个数量级

• 提高对广泛铵或胺浓度的样品的灵敏度

• 用于更高浓度样品时的准确度更高，减少了所需的校准检查标准品数量

• 提高具有高样品工作负荷行业（例如发电工业）的样品通量

• 更新的设计，更高的耐反压能力以及最高的抗泄漏性能

• 得益于创新的再生液清除设计，实现更低噪音和快速启动

• 自再生功能，节省时间

Dionex SC-CSRS 300 盐转换器阳离子自再生抑制器

订货信息：

Converts Analytes to the Fully-Dissociated Methanesulfonic Acid Species

With the SC-CSRS 300, nonlinear response of ammonia and certain amines can be overcome by converting the weak base analyte to a fully ionized form, thus extending the linear response. The SC-CSRS 300 suppressor is designed to make this conversion and provide linearity across as much as three orders of magnitude.

• Increased linearity for ammonium and amines

• Increased sensitivity for ammonium and amines

• Low background and noise

• Conversion to and detection as fully dissociated methanesulfonic acid

The SC-CSRS should be used in industries where regulated methods require a linear response. A linear response increases accuracy at higher concentrations, and so requires fewer calibration check standards over the calibration curve. Reduced calibration requirements increase sample throughput for industries with high sample workloads such as the power generation industry.

Method detection limits for Group I and II cations, ammonium, and amines using the SC-CSRS are equivalent to or better than those achieved using the CSRS 300.

Product Data Sheets
	Salt Converter-Cation Self-Regenerating Suppressor 300