核心参数
规格 | 1个 |
产品介绍
Dionex ERS 500 电解再生抑制器
该下一代抑制器拥有高容量、低噪音、耐高反压和快速启动的特点,可满足当前各种离子色谱应用需求。最新的电解抑制器是一款真正的主力设备,几乎适用于所有分析型 IC 应用。
拥有高容量、低噪音、耐高反压、快速启动,该新一代抑制器专为 IC 新需求而设计。Thermo Scientific™ Dionex™ ERS™ 500 电解再生抑制器使峰扩散最小化,提高峰效率,配合4μm 色谱柱效果更佳。该抑制器与高效 4μm 离子交换色谱柱匹配而起开发,在保持卓越分辨率的情况下以更高的流速实现更快的分离,或在保持样品通量的情况下以相同流速实现更高分辨率。
该高容量抑制器几乎支持所有分析型 的 IC 应用,可用于阴离子和阳离子分析,提供 2mm 和 4mm 两种规格。Dionex ERS 500 抑制器在标准孔 (4 mm) 和微孔 (2 mm) 规格下适用于碳酸盐(仅等度)、氢氧化物、甲基磺酸或硫酸淋洗液的等度或梯度应用。
下一代抑制器——专为 IC 应用新需求而造
由于其具有较高的反压耐受性(在高达 900 psi 的情况下无泄漏,在高达 200 psi 时进行操作),提高了联用检测技术的兼容性,特别是质谱仪
较高的温度耐受性(在运输和储存中高达 80°C,操作时为 40°C)
凭借其平面的填充床抑制槽,无电流操作后,无需试剂完全电解再生即可轻松恢复
低峰扩散保持 4μm 色谱柱的峰形效率
在无需化学再生的情况下重新启动之后,其高抑制容量可立即产生稳定的峰面积值
低噪音特性使抑制器适用于痕量分析
为更可靠定量提高灵敏度
与 Thermo Scientific™ Dionex™ CRD 300 碳酸盐去除装置配合使用时,Dionex ERS 500 抑制器在碳酸盐淋洗液条件下,能够降低背景电导和噪音、增强分析物响应和检测灵敏度,从而提高定量的可靠性。
对实现Reagent-Free™ IC (RFIC™) 操作十分重要
无需试剂的完全再生
Dionex ERS 500 抑制器可直接替代 Thermo Scientific™ Dionex™ SRS™ 300 自再生抑制器。
|
![]() The Dionex ERS 500 suppressor components and assembly |
订货信息:
The Thermo Scientific™ Dionex™ ERS™ 500 Electrolytically Regenerated Suppressor is compatible with Thermo Scientific Dionex IC systems equipped with a suppressor power supply. The new Dionex ERS 500 suppressors directly replace the Dionex SRS 300 suppressors. Simply install the new Dionex ERS 500 suppressor into your current Dionex IC system.
ERS 500 Electrolytically Regenerated Suppressor | |
---|---|
Dionex AERS 500 (4 mm) Suppressor | 082540 |
Dionex AERS 500 (2 mm) Suppressor | 082541 |
Dionex CSRS 500 (4 mm) Suppressor | 082542 |
Dionex CERS 500 (2 mm) Suppressor | 082543 |
Thermo Fisher Scientific is pleased to announce the introduction of the Thermo Scientific™ Dionex™ ERS™ 500 Electrolytically Regenerated Suppressor. The Dionex ERS 500 suppressor is a direct replacement for the Thermo Scientific™ Dionex™ SRS™ 300 Self-Regenerating Suppressor.
The Dionex ERS 500 suppressors have the same fit, form and function as the Dionex SRS 300 suppressors; they have been designed to directly address all the applications currently addressed by the Dionex SRS 300 suppressors with the following exception:
The Dionex ERS 500 suppressor does not support the chemical regeneration mode. The Thermo Scientific™ Dionex™ MicroMembrane™ MMS 300 Suppressor is recommended for chemical regeneration mode.
The key benefits of the new Dionex ERS 500 suppressor are:
Improved peak efficiency for improved performance, particularly when coupled with 4 μm based columns.
Improved back pressure resiliency for compatibility with a wider range of hyphenated detection techniques.
Improved thermal stability to eliminate installation failures due to damage during shipment, handling and operation.
Full electrolytic regeneration without reagents allowing easier recoveries after operation without current.
With the introduction of the Dionex ERS 500 suppressor, sales of the Dionex SRS 300 suppressor are being discontinued. Thermo Fisher Scientific will no longer receive orders for the Dionex SRS 300 suppressor once it is discontinued.
The Dionex ERS 500 Electrolytically Regenerated Suppressor serves virtually all analytical scale1 IC applications for both anions and cations. For anions, the preferred eluent is hydroxide. With Reagent-Free™ Ion Chromatography (RFIC)systems, the sample is determined using conductivity detection in the lowest possible background of high-purity water. AutoSuppression means ease of use; you don’t need to make regenerant because the suppressor is constantly regenerated by the continuous electrolysis of water. The Dionex ERS 500 suppressor offers:
Low background noise levels
Excellent peak efficiency for compatibility with 4 μm based columns
Fast startup equilibration times
Trace anion and cation determinations
Compatibility with hyphenated detection techniques including mass spectrometry detection
Compatibility with all Thermo Scientific Dionex ICS chromatography modules2
A three-fold increase in backpressure tolerance compared to previous generations
Full electrolytic regeneration without reagents
The Dionex ERS 500 suppressor delivers low backgrounds and low noise levels for the full range of ion-exchange Dionex IonPac columns and eluents, even under high-concentration gradient conditions.
When combined with the revolutionary Eluent Generator, the Dionex ERS 500 suppressor delivers truly automated, minimal-maintenance RFIC.
1For capillary scale IC applications use the Thermo Scientific Dionex CES 300 Capillary Electrolytic Suppressor.
2Excluding the Dionex ICS-90, ICS-90A, ICS-600 and ICS-900 systems. Older systems may require the Thermo Scientific Dionex RFC-10 or RFC-30 controller.
Dionex ERS 500 Electrolytically Regenerated Suppressor Specifications | |
---|---|
Dionex AERS 500 Suppressor | |
Physical Specifications | |
Dimensions (l × w × d) | 12.1 × 4.5 × 4.8 cm (4.25 × 1.8 × 1.9 in.) |
Weight | 295 g (0.65 lb) |
Void volume | 4 mm: <50 μL 2 mm: <15 μL |
Chemical Specifications | |
Operational Temperature Range1 | 15–40° C |
Shipping Temperature Range2 | 0–70° C |
Recommended Backpressure | 30–60 psi |
Maximum Eluent Flow Rate | 3 mL/min (4 mm) 1 mL/min (2 mm) |
Eluent Solvent Restrictions3 | <40% solvents in EWM4 |
Maximum Regenerant EWM4 Flow Rate | 5 mL/min (4 mm) 2 mL/min (2 mm) |
Modes of Operation Supported | Recycle, EWM4, MPIC5 (recycle recommended)6 |
Maximum Current | 500 mA for 4 mm, 100 mA for 2 mm |
Dionex CERS 500 Suppressor | |
Physical Specifications | |
Dimensions (l × w × d) | 12.1 × 4.5 × 4.8 cm (4.25 × 1.8 × 1.9 in.) |
Weight | 295 g (0.65 lb) |
Void volume | 4 mm: <50 μL 2 mm: <15 μL |
Chemical Specifications | |
Temperature Range1 | 15–40° C |
Shipping Temperature Range2 | 0–70° C |
Recommended Backpressure | 30–60 psi |
Maximum Eluent Flow Rate | 3 mL/min (4 mm) 0.75 mL/min (2 mm) |
Eluent Solvent Restrictions3 | <40% solvents in EWM4 |
Maximum Regenerant EWM4 Flow Rate | 5 mL/min (4 mm) 2 mL/min (2 mm) |
Modes of Operation Supported | Recycle, EWM4, MPIC5 (recycle recommended)6 |
Maximum Current | 500 mA for 4 mm, 100 mA for 2 mm |
1When installed outside the heated column enclosure, all suppressors can support applications up to 60 ?C.
2Short-term only; do not store or operate suppressors above 40°C for extended lengths of time.
3Solvents for anion eluents include methanol. Solvents for cation eluents include acetonitrile and dioxane.
4EWM = external water mode; for eluents containing >40% solvent, use the chemical regeneration mode.
5MPIC = Mobile Phase Ion Chromatography (or ion-pairing)
6Recycle recommended for aqueous applications without solvent.
供应商
银牌会员 第15年