产品介绍
THz功率计 太赫兹功率计
绝对功率/能量计
1、带宽:30GHz~3THz
2、灵敏度:5uW 以下
3、NEP: 5μW/Hz?
4、NEJ:1μJ
5、窗口有效面积直径大于30mm
6、精度优于10%
我们提供的THz功率/能量计是一款最新的带USB接口的绝对功率/能量计,具有噪声的连续FFT显示和功率级的动态数字显示功能。
该系统包括两部分:
1. 功率计探头。
2. 支持单元,基于National Instruments USB-6211数据采集模块。
特点
测量自由空间光束功率
可在计算机上显示功率
软件控制下,使用电子薄膜加热实现全自动绝对校准
频率相关窗口降低纠错率
准确性高于10%
NEP典型值为:5μW/Hz1/2
能量测量,典型的NEJ约为1μJ
宽带光谱:30GHz到3THz以上
感应区域大约Φ30mm
探头
探头为声光探测器,使用密封的空气室和压力传感器。
使用电池内置金属薄膜的电阻加热方式校准。
支持单元
支持单元基于National Instruments USB-6211数据采集模块。
附带的电子器件可增加校准时的薄膜加热功能和放大从探头的扩音压力传感器输出的信号。
写入LabVIEW的软件应用了锁定放大器,可以显示微波功率。
Absolute Terahertz Power/Energy Meter
A new USB version of our successful absolute power meter support unit is now available,
with continuous FFT display of noise and dynamic as well as digital readout of power levels.
The system is comprised of two parts:
1. The power meter head.
2. The support unit, based on a National Instruments USB-6211 data acquisition module.
Specifications:
Measures power in free-space beams
Displays power on a computer
Fully automatic absolute calibration using electrical film heating under software control
Frequency dependent window loss correction
Accuracy better than 10%
NEP typically 5μW/Hz?
For energy measurement the typical NEJ is about 1μJ
Broad Band: 30GHz to 3THz and beyond
Sensitive Area greater than 30mm in diameter
The Head
The head is a photo-acoustic detector using a closed air-cell and a pressure transducer.
Calibration is provided by ohmic heating of a thin metal film within the cell.
The Support Unit
The support unit is based around a National Instruments USB-6211 data acquisition module.
Additional electronics have been added to provide film heating for calibration and to amplify
the signal from the head's microphone pressure sensor. The compiled software, written in
LabVIEW, implements a lock-in amplifier and displays the microwave power.
供应商
金牌会员 第11年