Dionex IonPac ATC-HC阴离子捕集柱059604

Use Thermo Scientific™ Dionex™ IonPac™ ATC-HC and ATC-HC 500 Anion Trap Columns to strip anionic contaminants from deionized water or RFIC-EG eluents to prevent them from reaching the guard or analytical column. These high-capacity trap columns are designed specifically for use with RFIC-EG systems. The Dionex IonPac ATC-HC 500 column is identical to the Dionex IonPac ATC-HC column but packed in a column body that is compatible with non-stop operation at HPIC system pressures up to 5000 psi (34.5 MPa).

描述

Place the Dionex IonPac ATC-HC or ATC-HC 500 column between the pump outlet and the inlet of the EGC cartridge to remove contaminants from the deionized water. When using isocratic RFIC-EG eluents, the traps can be placed between the EGC cartridge outlet and the injection valve to remove contaminants from the eluent.

Engineered for superior chromatographic performance

• 4.0meq/column capacity

• One format, 9x75mm, for all applications

• High capacity allows for less frequent periodic off-line  regeneration

Dionex IonPac ATC-HC Anion Trap Columns

• For use with the Dionex EGC-KOH (Capillary),EGC-NaOH, EGC III LiOH, or EGC-K2CO3 cartridges in the Dionex EGC III KOH or EG50 Eluent Generator

Dionex IonPac ATC-HC 500 Anion Trap Columns

• Identical to the Dionex IonPac ATC-HC columns, but is packed in a column body that is compatible with nonstop operation up to 5,000 psi.

Dionex IonPac ATC-HC Anion Trap Columns, Borate Form

• For use with the EG generated borate eluents or with manually prepared borate eluents

Dionex IonPac ATC-HC 500 Anion Trap Columns, Borate Form

• Identical to the Dionex ATC-HC Borate Form but packed in a column body that is compatible with nonstop operation up to 5,000 psi.