核心参数
规格 | 407-232.393 |
产品介绍
北京龙天韬略科技有限公司业务
1、石墨管、石墨锥、雾化器、空心阴极灯、荧光灯、氘灯、矩管、样品杯、消解罐等高品质高性价比自产OEM耗材产品;
2、国内外各品牌各型号AAS、AFS、UV、HPLC、GC、ICP-AES、ICP-MS、EA等分析测试仪器设备、辅机及原装耗材;
3、精密仪器专用空气压缩机、氢气氧气氮气发生器、冷却循环水机、精密稳压延时电源、氢化物发生器等仪器配套辅机;
4、标准物质标准溶液,GBW,GSB、单标、混标、质控、考核、曲线、方法、校准,常规现货,证书随货,按需定制。
品牌原装 原厂售后 厂家质保 常规现货
407-232.393 德国耶拿Pack of 50 pieces PP- sample cups, 8 ml
407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces
407-230.073 Pack of 10 pieces PP-sample cup, 5 ml
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
407-402.926 Pack of 30 pieces Sarstedt PP- sample cups with 50 ml
Consumables multi EA 5000
effective from 01.01.2010
PriorityOrder numberDescription
Consumables general
402-889.527Auto-Protection valve assembly, complete
B402-889.091Lids for sample vials, 2 ml, set of 500 pieces
402-889.652Flow test kit
A402-889.182Wires for cleaning syringe needles, set of 10 pieces
402-007.513FAST connector, 1 piece
(adaptor angeled for gas tubings, black)
402-801.317Fuse for furnace unit
T 10 A H, 20 mm
402-820.044Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece
402-889.510Multi purpose combustion tube
B402-825.045Tweezers, straight, truncated
B402-889.092Sample vials, 2 ml, set of 100 pieces
(for sample rack with 112 positions)
402-889.558PTFE filter plate, d = 25 mm (Auto protection replacement
filter)
402-820.129Oxygen and argon gas supply tubing
FEP, OD 6 mm (sold by meter), 1 m
402-889.306Screw cap with hole, GL 18
402-889.557Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces
402-889.583Special sealing 12 mm
(FAST connector at outlet of multi purpose combustion tube)
402-822.118Heat resistent gloves, 1 pair
402-812.374Replacement screw
(mounting of autosampler on the basic unit/ ABD)
402-823.079Removable needles for 50 and 100 μl syringes, set of 3 pieces
402-886.248Waste hose
A402-889.206Septum for rinsing vessel
402-889.533Syringe 50 μl, with removable needle, without markings
402-889.534Syringe 100 μl, with removable needle, without markings 402-889.547Gripper
402-889.589Syringe 10 μl, for Autoinjector, with removable needle
recommended for higher element concentrations and systems with carbon module
402-889.592Syringe 100 μl, for Autoinjector, with removable needle
402-889.590Syringe 20 μl, for Autoinjector, with removable needle
recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)
402-889.591Syringe 40 μl, for Autoinjector, with removable needle
recommended as standard syringe for N/S systems
402-889.186Removable special needles, set of 3 pieces
供应商
银牌会员 第12年