Comparison of the softness and springine

2008-12-01 09:44  下载量：50

资料摘要

资料下载

Test Set-Up: Screw the probe into the load cell and tighten the bell lock to position the probe. The probe should be aligned parallel to the instrument arm so that the "V" is visible only from looking from either side of the instrument. Position the loaf centrally under the probe, so that the loaf is perpendicular to the instrument arm. Six tests were conducted along the length of each loaf, giving no consideration for slices, the tests were evenly spaced along the length and no test was conducted within 30 mm of the ends of the loaf.

资料下载

文献贡献者

厦门超技仪器设备有限公司
金牌会员 | 第18年
查看全部资料
相关资料 更多

相关产品

当前位置： 超技仪器 资料 Comparison of the softness and springine

关注

拨打电话

留言咨询