型号: | 美国 Cryocomp 低温刺刀头 |
产地: | 美国 |
品牌: | ULTECH |
评分: |
|
Cryogenic Bayonets
Cryocomp manufactures high quality cryogenic bayonets, needed for safe and effcient cryogenic transfer & piping systems. The bayonet is a mechanical joint which allows for the connection of sections of vacuum-jacketed/fex lines & pipe that can be dismantled and assembled easily in the feld while maintaining low heat leak at the joint.
CB700 Series Cryogenic Bayonets (Linde style) | |||
CB700 Male Bayonet | CB700 Female Bayonet | ||
The CB700 Series Cryogenic Bayonet design is a tube sized high-efficiency connection for vacuum insulated piping and transfer line applications. This series utilizes a threaded connection nut to facilitate easy connection and separation functions. A close tolerance seal design maximizes the efficiency and a silicone O-ring assures tight sealing at cryogenic temperatures. The bayonet is available in four lengths, 3", 6", 9" & 15" to interchange with new or existing installations. The CB700 will operate efficiently in the vertical or horizontal positions and is recommended for use with most cryogenic fluids including nitrogen, oxygen (with proper cleaning) argon and helium. | |||
B3000 Series Cryogenic Bayonets (Piping) | |||
B3000 Male Bayonet | Seal | V-Band | B3000 Female Bayonet |
Cryocomp bayonet assemblies offer low heat leak and quick solution field installation. Our B3000 Cryogenic Bayonet series is a high-efficiency tube & pipe connection for vacuum-jacketed transfer lines and vacuum insulated piping systems. The assemblies range from 1/2" tube to 1" pipe with a 150 PSI MAWP. The design utilizes an extremely close tolerance fit between the male and female components establishing a gas pocket (vapor lock) between the components to form a seal, which is at process stream temperature at one end and ambient at the other. The very small gas pocket and thin stainless elements contribute to the high-efficiency of the design. The close tolerance design eliminates the necessity of a nose seal. Other advantages are frost-free transfers, minimization of heat leak and easy disassembly. The pipe product line connects with a clamping system for continuous leak-free operation. Bayonet assemblies offer savings in terms of decreasing field assembly time and lower installation costs coinciding with low heat leak |
CB700 Tube Size Linde Style Bayonets | |||
TECHNICAL DATA | |||
• Will operate efficiently in the vertical or horizontal positions. | |||
• Designed in four thermal lengths: 3" to interchange with existing Linde installations, 6", 9" and 15" to fit most thermal and physical criteria. | |||
Inner lines are tube size and available in 1/2" OD only. Adapters are available for 1/4" and 3/8". | |||
MAWP: 150 PSIG | |||
Recommended for use with most cryogenic fluids including nitrogen, oxygen (with proper cleaning and seal material), argon, and helium. |
B3000 Series Pipe Size Bayonets | |||
TECHNICAL DATA | |||
Highly efficient and reliable close tolerance design for vertical or horizontal applications. | |||
Designed for fast and convenient installation for piping fabricators. | |||
No clamshell required. | |||
MAWP: 300 PSIG. Proof: 450 PSIG | |||
All internal components leak tested to 1 X10-9 SCC GHe/SEC. | |||
Convenient v-band closure. |
Bayonet Installation | |||
Vertical bayonets must be installed with the male above the female, no exceptions. (FIG. 1) For best thermal results it is necessary to have the flange or closure junction and seal at the upper most location and the cold interface at the bottom. This forms a gas pocket between the liquid interface and the O-ring which keeps the seal at a nearly ambient temperature. Horizontal bayonet sets can be installed with the male either up stream or down stream.[FIG. 2) Industry convention has For flanged bayonets, be sure to grease the O-ring seal with a system compatible grease. After tightening the V-band tension nut, tap the outside of the strap at several points around the OD with a plastic hammer to firmly seat the “V” section on the flange and then re-torque the nut. (FIG. 3) Repeat this process at least 2 more times. |
相关产品
OPTI-MAGNETO磁光超导低温系统
DRYICE1K 超低温系统
美国ARS LT3-OM显微型低温恒温器
美国ARS LT3液氦流型低温恒温器
美国IRLabs红外实验室Bolometer 辐射热测量计系统
美国ARS超稳超低振动低温探针台‐PS‐NS‐10‐4
美国ARS低温闭循环真空探针台-PSF-10-4
美国ARS标准光学型闭循环低温恒温器X-1AL
美国ARS超稳无液氦低温恒温器-udrift
美国ARS超低振动超精细闭循环低温恒温器X-20
美国ARS顶端装载型闭循环非光学低温恒温器X-19-NO
美国ARS显微型超低振动超精细闭循环低温恒温器-X20-OM
美国ARS液氦型连续流低温恒温器LT4
美国ARS-UHV超低振动超精细闭循环恒温器 X-20B
美国ARS UHV显微型连续流低温恒温器 LT3B-OM
关注
拨打电话
留言咨询