| 型号： | FPA0640P15F-22-T2 |
| 产地： | 陕西 |
| 品牌： | 立鼎 |
| 评分： |
|
FPA0640P15F-22-T2
ShortwaveInfrared(1.2-2.2μm)640x512 InGaAs Focal Plane Array FPA0640P15F-22-T2:with 2-Stage Thermoelectric Cooler | |
FEATURES 640x512 Array Format 28-pin Metal SDIP Package Embedded Thermoelectric Cooler Built-in Temperature Sensor 1.2μm-2.2um Spectral Range Quantum Efficiency >70%at 1.9μm Typical Pixel Operability >98% Snapshot ITR/WR and IMRO Readout Modes 2,4 or8 Outputs with up to 18MHz Pixel Rate Windowing Capability | APPLICATIONS ● Shortwave-Infrared Imaging ● Hyper-/Mulli-Spectral lmaging ● Semiconductor Inspection/Process Monitoring ● Waste Recycling ● Medical Science and Biology ●lce/Slush/Moisture Mapping ● High-Speed Industrial Thermal Imaging ● See through Fog/Smoke ● Laser Beam Profling ● Mineral ldentification |
| Row lmage @-40℃ |
GENERAL DESCRIPTIONS
PARAMETER | UNIT | VALUE |
Sensor Technology | Planar InGaAs PIN | |
Spectral Range | μm | 1.2-2.2 |
Actugl Pixel Array | 640x512 | |
Fffective Pixel Array | 636x508 | |
Pixel Pitch | μm | 15 |
lmag Size | mm | 9.6x7.68 |
Pack )C | 28-pin Metal SDIP Package | |
Package Size LxWx] | mm | 36.1x25.4x7.3(without pins) |
Weigh | g | 19.5(±0.5 |
SPECIFICATIONS(ITS=-40℃)
Parameter | Unit | Typical Value | Conditions | |
2.3Dark Current | fA (=6250 e/s) | ≤500 | Photopixel Biased @-0.1 V Mean Value | |
23Quantum Efficiency*Fill Factor (QEFF) | % | ≥60 | λ=1.4μm-2.1μm | |
23Response Nonuniformity | % | ≤10 | At 50%Well Occupation | |
2.3Response Nonlinearity Max.Peak-to-Peak Deviation) | % | ≤4 | 15%-85%Well Occupation Range | |
4Charge Capacity | @High Gain,46.2 μV/e | Me | 0.041 | ROIC Specifications |
@Mid Gain,16.2 μV/e | 0.118 | |||
@Low Gain,1.39 μV/e | 1.380 | |||
4Readout Noise Floor | e | <35 | In High Gain Mode | |
Noise-Equivalent Irradiance (NEl) | ph#/cm²s | ≤4.5x10lc | In High Gain Mode Integration Time =3.33 ms λ=1.9μm | |
Mean Detectivity | cm- √Hz/W | ≥1.7x1012 | ||
Output Swing | V | 2.25 | ||
Minimum Integration Period | μs | <1 | ||
2.5Pixel Operability | % | ≥98 | Percentage of Pixels with Response Output Deviation within±30%of MeanValue. | |
6Maximum Cooling Capability (△Tnx | ℃ | ≥60 | THeatsrk =20C | |
Readings from integrated temperature sensor (TS).
These ifems are defined for central effective pixel array(636x508),.Theirvalues correspond to default operation conditions.
Contact us for furtherinformation.
ABSOLUTE MAXIMUM RATINGS
Parameter | Unit | Min. | Max |
7Operating Temperature | ℃ | -40 | +71 |
7Storage Temperature | ℃ | -40 | +80 |
Power Consumption | mW | 200 | |
9TEC Bias | V | 10 | |
9TEC Current | A | 2.1 |
7.Non-condensing environment.
8.Without powering on the thermoelectric cooler.
9.Applied to Pin-1 for cooling operation.Operation above these maximum ratings causes excessive(local)heat accumulation and may result in permanent damage to the cooler.
PACKAGE OUTLINE (Unit:mm)
TOPVIEW
SIDE VIEW
BOTTOM VIEW
InGaAs Focal Plane Array
FPA0640P15F-22-T2
EADINGOPTOELECTROMIC
DATASHEET VERS.2.0 May 2021
EXAMPLE CURVES
Histograms of Dark Condition
Dark Output (%Full Well)
Histograms of lluminated Condition
QEFF(%)
QEFF Spectrum
Wavelength (nm)
Output(V)
Output Linearity
TINT (ms)
Note:The example curves are subject to change without notice.
相关产品
工商信息
信息已认证
关注
拨打电话
留言咨询
