1.微量天平: 可配合用户自备之微量天平,规格具备电磁补偿 及内置校准砝码,
称重范围80/210g,可读性各别为0.01 mg/0.1 mg, 可进行上下部称重测量,
内置RS232接口,可进行归零,校准及数据传输功能.
2.等温箱:
铝合金材质,具备不透气密闭箱门及锁定装置,同时方便样品进出,温度控制范
围15-95℃,精度±O.1℃, 箱体样品空间为5.2 x 5.2 x 12.8 cm ,RH及温度
探针方便移动设计,空间设计可视需要额外容纳升降台或微量加热器( 500℃ ),
箱体与天平间具备专利接口设计,可将水气排出箱体,配备额外进气口,可外接
独立气体(有机)来源.
3.V-Gen 湿度产生模块:
全自动计算机控制湿度产生器,基本”两温法”产生露点值0-90℃,精度±0.2℃,
配备两支温度探针(RTDs),各别位于V-Gen凝结箱及样品箱,精度±0.1℃,此两温
模式适用于高温应用,不须干燥气体,产生RH值低于0℃露点时,使用分流法产生
湿度,气体干燥程度决定最低RH值,流速由使用者设定,最高500 cc/min.,采用
Rotronic(SC05)高温数字RH传感器(最高100℃),提供16位RH及温度数字数据,
最大精确度RH±1%,温度±0.2℃,传感器(仅5 mm直径及5 cm长度)适用于局限
小空间.
4.具备两套专用软件
A. V-Gen湿度产生器操作软件:
可单独操作V-Gen湿度产生器,包含全套控制软件,RH设定及曲线产生,可于任何
实验当中改变设定参数,使用不同传感器进行RH控制,绘制曲线,报表,处理储存
数据及RH计算.
B. V-GA水份吸附分析软件:
技术参数: - Temperature control of sample chamber from sub-ambient to 95 C with
stability 0.1 C
- Temperature of experiment from sub-ambient to 60 C at full range of
RH (standard model)
- Sample chamber size (5.2cm x 5.2cm x 12.8cm),different sizes
optional
- High temperature digital RH probe (RH and T data)
- Additional temperature sensor (RTD) (in the vicinity of the sample)
- Proprietary design of vapors exhaust system and anti-condensation
protection
- Uniform RH distribution (special diffuser)
- Dual gas/vapor entry ports
- Large area sample holders with fine mesh bottoms
- USB/Serial communication port for transfer of RH and temperature
data to PC
- Small size of instrument (w/o balance): 23cm x 27cm x 38cm
- Options,like precision lift table or high temperature internal furnace with temperature ramping (up to 400 C) can be implemented