NL300系列高能量电光调Q激光器

报价 ¥50万 - 100万

综合评分暂无

仪器对比

品牌

Ekspla

型号

NL300

产地

欧洲其他国家

应用领域

共5个

北京欧兰科技发展有限公司

营业执照已认证

金牌会员
第17年
一般经销商

样本下载

产品详情

Features

Rugged sealed laser cavity
Up to 800 mJ pulse energy
Better than 1 % rms pulse energy stability
10–30 Hz pulse repetitio rate
3–6 ns pulse duration
Thermo stabilized second, third, fourth and fifth harmonics generator modules
Optional attenuators for fundamental and/or harmonics wavelengths
Water-to-water or water-to-air cooling options
Replacement of flashlamps without misalignment of laser cavity
Remote control via keypad and/or RS232/USB port

Applications

Material processing
OPO, Ti:Sapphire, dye laser pumping
Laser spectroscopy
Remote sensing

NL300 series electro-optically Q-switched nanosecond Nd:YAG lasers produce high energy pulses with 3 – 6 ns duration. Pulse repetition rate can be selected in range of 10 – 30 Hz.
NL30×G models are optimized for OPO pumping that requires smooth beam profile without hot spots.
NL30×HT models are designed for maximum energy extraction from the active element. Up to 800 mJ pulse energy can be produced at a 10 Hz pulse repetition rate.
A wide range of harmonic generator modules for generation up to a 5th harmonic is available.
Harmonics generators can be combined with attenuators that allow smooth output energy adjustment without changing other laser parameters, i.e. pulse duration, pulse-to-pulse stability, divergence or beam profile. For a more detailed description of harmonic and attenuator modules please check our harmonic generators selection guide.
The extremely compact laser head is approximately 480 mm long and can be fitted into tight spaces. The laser power supply has a 330 × 490 mm footprint. Easy access to the water tank from the back side of the power supply facilitates laser maintenance. Replacement of flashlamp does not require removal of pump chamber from the laser cavity and does not lead to possible misalignment. The powering unit can be configured with water-to-water or water-to-air heat exchangers. The latter option allows for laser operation without the use of tap water for cooling.
For customer convenience the laser can be controlled via a RS232 or USB port with LabView™ drivers (included) or a user-friendly remote control pad. Both options allow easy control of laser settings.