Spray Geometry and Patternation

LaVision’s SprayMaster Geometry package extracts spray plume morphology and geometry information from backlight and light sheet spray images.
Depending on the optical arrangement, the spray image obtains information about the spray pattern (radial spray cuts) or the spray plume shape and propagation (axial spray cuts).
Analysis of multi-hole injectors (e.g. automotive fuel sprays) reveals geometry information for each individual spray cone separately.

Radial spray cuts: spray patternation

Radial cuts are derived from light sheet images in cross section with the
spray axis.

spray pattern area and its equivalent diameter
mass circle diameters according to SAE definition
centroid position based on spray image intensity
largest and shortest radius of the pattern rim
plots about radial and angular spray distribution to reveal the structural characteristics of spray plumes

Axial spray cuts: plume geometry and propagation

Axial cuts are aligned with the spray propagation direction. Measurements
are achieved using light sheets, global lighting or backlighting.

spray cone angle measured e.g. at a given distance from the orifice
bent angle (deviation from orifice axis) and both
half angles to indicate the symmetry and direction of the spray plume
tip penetration to represent the propagation of the spray
angular spray density plot to show the uniformity of the spray

Product Information

Spray Geometry Software

LaVision SprayMaster Geometry 喷雾几何参量测量系统信息由北京欧兰科技发展有限公司为您提供，如您想了解更多关于LaVision SprayMaster Geometry 喷雾几何参量测量系统报价、型号、参数等信息，欢迎来电或留言咨询。除供应LaVision SprayMaster Geometry 喷雾几何参量测量系统外，北京欧兰科技发展有限公司还可为您提供LaVision SprayMaster inspex 喷雾成像测量系统、LaVision SprayMaster 喷雾成像测量系统等产品，公司有专业的客户服务团队，是您值得信赖的合作伙伴。