方案摘要
方案下载应用领域 | 能源/新能源 |
检测样本 | 天然气/燃气 |
检测项目 | |
参考标准 | 暂无 |
采用LaVision公司的2D-PIV系统和Artium公司相位多普勒粒子干涉仪,对一种新型燃气轮机燃烧室双相喷射器的喷雾特性和速度分布特性进行了实验测量和研究。
A novel airblast injector is designed for gas turbine combustors. Unlike standard pressure swirl and prefilming/non-prefilming air blast atomizers, the novel injector is designed to improve the fuel injection delivery to the injector by applying porous stainless steel tube with 7 m porosity to enhance atomization of the fuel. The porous tube is used to inject the fuel between two air streams, viz. through inner section of the tube and the other swirling stream merging downstream of the tube. Jet-A fuel is injected through the outer surface of the porous tube. The swirler located at the bottom of the porous tube, swirl vane angle and air split are selected to increase the amount of air through the tube and facilitate the atomization. Due to the permeability of the tube, a thin liquid sheet is produced along the inner surface of the tube. The liquid sheet is atomized by the inner airstream by surface stripping. The advantage of such an injector is that the surface area of contact between the fuel and air can be increased, which can enhance the distribution of the fuel more effectively, obtain constant uniform liquid sheets under all liquid loadings, and produce a fine spray at engine idle conditions. The injector can also be used to inject simultaneously both liquid and gaseous fuels. An experimental approach is adopted in the present study to characterize initially the spray and fuel placement emanating from this injector. Patternator tests are carried out to study the fuel distribution. The results show a hollow cone spray with symmetric distribution of droplets surface area density. Spray characterization is further analyzed by PDPA measurements. The measured SMD shows that the atomization is reasonably good with wide fuel placement downstream of the atomizer at atmospheric conditions. The effect of pressure drop on the velocity profile is investigated by PIV measurements.
在一个双稳湍流涡旋火焰中,对间歇性动态的时间-频率定位
Particle-laden Taylor-Couette流:高阶转变和径向局部波浪涡旋的证据
7根杆束的流体-结构相互作用:用实验数据对比数值模拟
相关产品
汽车光学检测系统AIS
PT403型波长可调谐皮秒激光器
ANL系列高能量高重复频率DPSS纳秒激光器
APL4206 系列高能量皮秒激光放大器
UltraFlux FF/FT 5000 高能量可调谐飞秒激光器系统
UltraFlux FT300型波长可调谐飞秒激光器系统
Ekspla 超高功率激光器系统SYLOS 2A
LaVision PTUx 可编程时间控制单元
LaVision 用于粒子成像测速PIV的相机
LaVision StrainMaser 全场应变测试系统组件
LaVision 用于数字图像相关DIC的相机
LaVision StrainMaster 数字图像相关分析软件包
LaVision 标定板
LaVision StrainMaster 形变应变成像测量系统
LaVision StrainMaster DVC 体视全场应变测量系统
关注
拨打电话
留言咨询