CHEM4-UV-FIBER分光光度计系统可覆盖200-885nm的光谱范围,光学分辨率为1.0 nm(FWHM),可在1秒内捕获3648像素的数据。它是进行相对光强和辐射测量的理想工具。
CHEM4-UV-FIBER分光光度计系统由USB4000光谱仪和相关附件组成,来进行吸光度测量。这些可进行吸收测量的附件包括ISS-UV-VIS集成取样系统、一个300μm的抭负感作用光纤与一个1-cm样品支架。
基于光纤的系统的优越性在于其灵活性。根据测量的要求,还可以添加反射型光纤探头和浸入型光纤探头配件。
产品特点:
SPECIFICATOINS
Physical
|
|
Spectrometer dimensions:
|
89.1 mm x 63.3 mm x 34.4 mm
|
Spectrometer weight:
|
190 grams
|
Light source dimensions:
|
198 mm x 104.9 mm x 40.9 mm
|
Light source weight:
|
400 g
|
Detector Specifications
|
|
Detector:
|
Toshiba TCD1304AP Linear CCD array
|
Pixels:
|
3648 pixels
|
Pixel size:
|
8 μm x 200 μm
|
Pixel well depth:
|
100,000 electrons
|
Signal-to-noise ratio:
|
300:1 (at full signal)
|
A/D resolution:
|
16 bit
|
Corrected linearity:
|
>99.8%
|
Sensitivity:
|
130 photons/count at 400 nm; 60 photons/count at 600 nm
|
Optical Bench
|
|
Design:
|
f/4, Asymmetrical crossed Czerny-Turner
|
Focal length:
|
42 mm input; 68 mm output
|
Entrance aperture:
|
25 µm wide slit
|
Grating:
|
Grating #1
|
OFLV filter:
|
OFLV-200-850
|
UV enhanced window:
|
Yes, UV4
|
Fiber optic connector:
|
SMA 905 to 0.22 numerical aperture single-strand optical fiber
|
Spectroscopic
|
|
Wavelength range:
|
200-885 nm
(The actual range typically exceeds what's listed here. The range listed is where you will see changes as small as 0.01 absorbance units.) |
Optical resolution:
|
1.0 nm FWHM
|
Signal-to-noise ratio:
|
300:1 (at full signal)
|
A/D resolution:
|
16 bit
|
Dark noise:
|
50 RMS counts
|
Integration time:
|
3.8 ms to 10 seconds
|
Dynamic range:
|
2 x 108 (system), 1300:1 for a single acquisition
|
Stray light:
|
<0.05% at 600 nm; 0.10% at 435 nm
|
Light Source/Sample Holder
|
|
Power consumption:
|
420 mA @ 12 VDC; external power supply (included)
|
Pathlength:
|
1 cm
|
Cuvette shape:
|
Square
|
Light source:
|
Deuterium tungsten
|
"Z" dimension:
|
15 mm
|
Bulb life (hours):
|
800 deuterium; 2,000 tungsten
|
Time to stabilized output:
|
~30 minutes
|
Optical Fiber
|
|
Optical fiber:
|
P300-1-SR; 300 μm diameter, solarization resistant
|
Electronics
|
|
Power consumption:
|
250 mA @ 5 VDC
|
Data transfer speed:
|
Full scans to memory every 5 ms with USB 2.0 port, 18 ms with USB 1.1 port
|
Inputs/Outputs:
|
Yes, 8 onboard digital user-programmable GPIOs
|
Analog channels:
|
No
|
Auto nulling:
|
Yes
|
Breakout box compatible:
|
Yes, HR4-BREAKOUT
|
Trigger modes:
|
4 modes
|
Strobe functions:
|
Yes
|
Connector:
|
22-pin connector
|
Computer
|
|
Operating systems:
|
Windows 98/Me/2000/XP, Mac OS X and Linux with USB port; Any 32-bit Windows OS with serial port
|
Computer interfaces:
|
USB 2.0 @ 480 Mbps (USB1.1 compatible); RS-232 (2-wire) @ 115.2 K baud
|
Peripheral interfaces:
|
SPI (3-wire); I2C inter-integrated circuit
|
相关产品