Measurement channels | 1 to 8 channels (depending on the configuration) |
Synchronisation | Fully synchronized or fully independent control of each channel |
Signal processing | Integrated powerful signal processing unit for very fast and precise |
measurements even when all channels are active | |
Mechanical dimensions | 19 inch 3HE Housing (rack mountable) |
450mm x 290mm x 150mm (width x depth x height) | |
Connectors | USB, Power connector (100-240VAC) |
Specifications of a measurement channel equipped with an IF-Frontend
Frequency
Range | 100mHz to 10MHz | |
Resolution | 5mHz, 25mHz or 100mHz (depending on the setting) | |
Frequency | 100ppm (25°C) | |
Frequency-Sweep-Settings | ||
Sweep type | linear, logarithmic, list | |
Points | 1 to 2048 | |
Sweep-Delay | 0μs to 800μs in 1μs steps | |
Signal amplitude | ||
Range | 0.1mV to 100mV peak-amplitude | |
0.1mV to 250mV peak-amplitude (from revision June 2011) | ||
Resolution | 0.1 mV | |
Precision settings | ||
Range | 0 | fast, but less precise |
1 | standard configuration |Z|/|Z|<0.1% | |
>1 | slow, but high accuracy |
D a t as he e t S cio s pe c IS X - 5 | |||||
J u ne 2 0 1 2 | 2|P a ge | ||||
Relation between frequency range setting and frequency resolution or measurement accuracy | |||||
3 frequency ranges with different resolution | |||||
range | < 100kHz | < 1MHz | < 10MHz | ||
resolution | 5mHz | 25mHz | 100mHz |
The choice of the frequency range also affects the accuracy of the impedance measurement. This relation is shown schematically for one measurement.
Relation between the precision setting and the measurement time or the measurement accuracy
Overview of the different range and precision settings --'? rg????'? his "? to?'???n schematically for one measurement.
All specifications refer to measurements done with a Sciospec ISX-5 in combination with the Sciospec MEArack. The signal amplitude is set to 100mV and the frequency range to ?<10MHz“. Measurements done, using the BNC connectors show very similar results.
Beispiel Messungen:
Frequenzsweep: | 100Hz – 1MHz, 80 logarithmische Schritte, | |||||
Pr?zision 1, Amplitude 100mV, Messbereich MΩ | ||||||
Messadapter: | Sciospec MEA Rack | |||||
Messobjekt: | Multielektrodenarray, 40μm Elektroden, 200μm Abstand, Platin | |||||
PBS Pufferl?sung |
相关产品