LaVision SprayMaster Geometry 喷雾几何参量测量系统
报价 ¥80万 - 100万
仪器对比
关注
样本下载
Spray Geometry and Patternation
LaVision’s SprayMaster Geometry package extracts spray plume morphology and geometry information from backlight and light sheet spray images.
Depending on the optical arrangement, the spray image obtains information about the spray pattern (radial spray cuts) or the spray plume shape and propagation (axial spray cuts).
Analysis of multi-hole injectors (e.g. automotive fuel sprays) reveals geometry information for each individual spray cone separately.
Radial spray cuts: spray patternation
Radial cuts are derived from light sheet images in cross section with the
spray axis.
spray pattern area and its equivalent diameter
mass circle diameters according to SAE definition
centroid position based on spray image intensity
largest and shortest radius of the pattern rim
plots about radial and angular spray distribution to reveal the structural characteristics of spray plumes
Axial spray cuts: plume geometry and propagation
Axial cuts are aligned with the spray propagation direction. Measurements
are achieved using light sheets, global lighting or backlighting.
spray cone angle measured e.g. at a given distance from the orifice
bent angle (deviation from orifice axis) and both
half angles to indicate the symmetry and direction of the spray plume
tip penetration to represent the propagation of the spray
angular spray density plot to show the uniformity of the spray
Product Information
1年
是
有
一人次
质保期内一次
全天候电话邮件微信远程连接支援服务
一周内到达用户现场开始维修
- 相关仪器
相关产品
