应用型镜片 Si/glass/Ge/ZnSe/Sappire
Frontal Optics for Ultimate Applications资料下载：Download Frontal Optics for Ultimate Applications Datasheet (PDF, 285 KB)IR optics is widely used when the tasks like the following are arisen:- Early and fast detection of the people, targets, forest fires, etc. - Day and night panoramic surveillance - Security perimeters control - Range and visual tracking - Coastal and border passive surveillance - Traffic monitoring - Detection of intrusion, fight against piracy, anti-smuggling, anti-collision and many others. The challengings of these applications dictate special requirements both to a substrate' s material and to a coating since just the frontal elements face the most severe service conditions.Any optical assembling here must not only clearly “see” and distinguish an target/object, but minimize the posibility of its own detection.Below we emphasize the basic requirements to the materials and coatings:- for brightness and image contrasts the internal light scattering in the IR materials has to be not more than few percents. For more details please look at the chapter “Germanium Windows and Lenses for Thermography”. At the same time the maximal directional transmission for monocrystalline Ge should exceed 40% (when the integral one = 46%) and for monocrystalline Si should exceed 48% (when the integral one = 54%) - to the said above, to quarantee the high optical transmission the coatings should have minimal residual reflection (a few percents for a narrow wavelength range) over the working range including the cases when at the same time transmission within both atmospheric optical windows (3-5um and 7-14um) is required - to quarantee high enough reliabilty, durability and failure-free performance the coatings must meet the requirements of the optical-mechanical, adhesion, climatic and others tests: Russian OSТ 3-1901-95, MIL-C-675C, MIL-STD-810.Hereunder are some examples of the optical elements demonstrating the range of our products with brief information about application. Additional information is available in the chapter “Optics for Sensors and Detectors”.1) Si protection window for a night-sight operating at 3-5um range Generally used as a front window transmitting over the working range to protect an optical assembling of IR night vision system. Detection range is 10km.In combination with a window for a visible channel (for a daylight inspection - see below #2) such night-sights are placed at some military-oriented vehicles.Specification:Part typePlano-plano windowMaterialSiOverall dimensions, mm218.0 (-0.3/-0.5) x 119.0 (-0.3/-0.5)Thickness, mm16 (+/-0.2)Surface quality, scr/dig60/40Surface figure, fringesN=5, deltaN=0.3 @633 nmWedge, arc. min.1AR Coating (DLC/DLC type) @ 3-5 umSee the curve attached2) Radiation-resistant glass К108 window for a night-sightApplication - see above #1.This window is placed near the above-mentioned Si window and operates in the day-time. Combination of AR coating outside and indium tin oxide (ITO) coating from inside allows to minimize residual reflection and prevent ice accretion, snow ticking аnd to conduce of water/hoar/ice removal. As a result a window effectively works at three working wavelength ranges.Specification: Part typePlano-plano windowMaterialRadiation-resistant glass К108Overall dimensions, mm228.0 (-0.3/-0.5) x 109.0 (-0.3/-0.5)Thickness, mm20.0 (+/-0.5)Surface quality, scr/dig60/40Surface figure, fringesN=2, delta N=0.2 @633 nmWedge, arc. min.1AR Coating (AR/ITO type) @ 430-680 nm, 870-920 nm and 1060 nmSee the curve attached 3) Ge meniscus lens of thermal vision system for target-seeking and flight orientation Application - on-board equipment.Working wavelengths range - 3-5um.Working angles range - 0-57 degrees.Specification:Part typeMeniscus lensMaterialGeDiameter, mm36.0 (-0.05/-0.08)Central thikness, mm2.4 (+/-0.1)EFL tolerance, %+/-2Surface quality, scr/dig60/40Surface figure, fringesN=2, delta N=0.2 @633 nmAR Coating (BBAR/BBAR type) @ 3.6-4.8 umSee the curve attached 4) Ge protection window for a night-sight operation at 8-12um rangeApplication - periscopic night-sight for the armoured vehicles.Detection range (the target like a tank) is 3km.Specification: 5) Ge protection meniscus lens for infrared imaging camera operating at 7-14umApplication - passive surveillance system of long-distance targets as well as large area monitoring in real time regime. The feature of the system is automatic detection and target' s tracking.Vehicle detection range is 7km.Human detection range is 3km.Specification:Part typeMeniscus lens Part typePlano-plano windowMaterialGeOverall dimensions, mm156.0 (+0/-0.2) x 130.0 (+0/-0.2)Thickness, mm10.0 (+/-0.1)Surface quality, scr/dig60/40Surface figure, fringesN=5, delta N=0.5 @633 nmAR Coating (DLC/DLC type) @ 8-12 umSee the curve attached MaterialGeDiameter, mm154.0 (-0.145/-0.245)Central thikness, mm11 (+/-0.1)EFL tolerance, %+/-2Surface quality, scr/dig60/40Surface figure, fringesN=10, delta N=2 @633 nmAR Coating (DLC/BBAR type) @ 7-14 um See the curve attached 6) ZnSe protection meniscus lens for a land-based thermal vision systemApplication - monitoring, seeking and tracking of various flying objects.Specification:Part typeMeniscus lensMaterialCVD-ZnSeDiameter, mm130 (-0.043/-0.143) Central thikness, mm12.1 (+/-0.02)EFL tolerance, %+/- 2Surface quality, scr/dig60/40Surface figure, fringesN=2, delta N=0.2 @633 nm (deltaN=0.1 in central area of D33.5 mm)AR Coating (BBAR/BBAR type) @ 3-5 um as well as for 0,55 umSee the curve attached 7) Sapphire window for infrared imaging camera operating at 3-5um rangeApplication - the most demanding and severe working conditions when an application dictates the exaggerated requirements to durability of the material, its chemical stability, non-toxicity and so on.We have been suppling similar windows for:- the systems to measure temperature profile and speeds of the liquid' s flow - protection of the objectives during high pressure experiments as well as at dynamic impacts - observation of the processes into the wind-tunnels. Specification:Part typePlano-plano windowMaterialOptical grade sapphireDiameter, mm150.0 (+0/-0.2)Thikness, mm 10.0 (+/-0.2)Surface quality, scr/dig60/40Surface figure, fringesN=2, delta N=0.5 @633 nmAR Coating (BBAR/BBAR type) @ 3-5 umSee the curve attachedTydex has long-time and approved experience in suppling of such optics for above-mentioned applications all over the world.We are pleased to emphasize that the list of similar components is permanently replenished and we are ready to consider your new RFQ' s.
留言咨询
400-860-5168转6081
我要推广仪器
下载APP
新疆维吾尔自治区喀什地区妇幼保健计划生育服务中心493.20万元采购培养箱
江苏省疾病预防控制中心110.00万元采购流式细胞仪
河北省生态环境监测中心1393.00万元采购颗粒物监测仪
2024年全球前2%顶尖科学家榜单发布（附名单）
1075万！中国科学院长春应用化学研究所国家电化学与光谱研究分析中心和江西省检验检测认证总院食品检验检测研究院仪器设备采购项目
谈实验室分析工作对科学仪器售后服务的需求——访东莞新科材料科学实验室表面分析实验室主任陈学文
先河环保：2024年半年度净利润约1867万元，同比下降36.01%
吴立冬研究员与合作者开发出海洋垂直深度分布算法，揭示未来海洋牧场降低甲烷排放的巨大潜力！
易瑞生物：上半年业绩大幅减亏，食品安全检测收入增长41%
博晖创新：2024年半年度净利润约2763万元，同比增加366.35%