卤代化合物

碳水化合物去除盒 消除劳动密集型的样品净化，确保可靠的氨基酸定量使用的Thermo Scientific戴安ICS-5000+/3000碳水化合物拆卸配件套件为ED电化学检测线去除氨基酸样品的碳水化合物。注射泵和六通阀在使用的Thermo Scientific戴安™ CRC去除碳水化合物结合盒该试剂盒的工作，以使Thermo Scientific的戴安AAA级直接离子色谱系统上的氨基酸样品的自动预处理。 碳水化合物去除盒订货信息：Carbohydrate Removal Accessory Kit for ICS-3/5000 DP064418Carbohydrate Removal Accessory Kit for ICS-3/5000 SP070510Carbohydrate Removal Cartridge (CRC) for AAA-Direct0685982nd Channel Kit, LC20/30, Right Slide, Rear Loading052322Acclaim SST Guard Cartridge Holder V-1059456 The Carbohydrate Removal Cartridge (CRC) is an in-line sample pretreatment cartridge that removes carbohydrates from your amino acid sample.In-line sample pretreatment cartridge eliminates laborious sample cleanup.Removes carbohydrates from amino acid samples, ensuring reliable amino acid quantification.AAA-Direct™ is a simple new approach for separating and detecting amino acids without derivatization. With this technique, it is also possible to separate and detect select carbohydrates simultaneously with amino acids in a single run. For applications where carbohydrates are present, but only the amino acids are of interest, the CRC can be installed to remove the carbohydrates on-line.The CRC is an in-line pretreatment cartridge packed with cation-exchange resin. The amino acids are retained and the carbohydrates are washed to waste. After the carbohydrates have been removed from the cartridge, the CRC is switched in-line with the AAA-Direct system and the AminoPac® PA10 column separates the amino acids.The CRC is used in conjunction with the carbohydrate removal accessory (CRA). In addition to the CRC, the CRA consists of a syringe pump and six-port valve. To install the CRA, the AAA-Direct system must be modified. The syringe pump is connected to the autosampler, whereas the GS50 pump and AminoPac PA 10 are redirected to the six-port switching valve.Comparison of Chromatograms with and without the SugarTrap Installed.Ordering InformationCarbohydrate Removal Accessory Kit for ICS-3/5000 DP064418Carbohydrate Removal Accessory Kit for ICS-3/5000 SP070510Carbohydrate Removal Cartridge (CRC) for AAA-Direct0685982nd Channel Kit, LC20/30, Right Slide, Rear Loading052322Acclaim SST Guard Cartridge Holder V-1059456

作为专门适合分离分析碱性化合物的色谱柱，其健合相为改性C8疏水基团，60A的孔径使得其健合相密度比常规色谱柱高出许多，从而使得硅胶表面的硅醇基团暴露在流动相中的几率大大减少，如此碱性化合物的拖尾影响也将微乎其微。卡套柱：Lichrospher 60 RP-select B的粒径为5μm，10μm两种；长度有4mm, 25mm,75mm,100mm,125mm,150mm,250mm；内径有3mm, 4mm, 4.6mm。标准柱有三种规格，粒径5μm，长度100mm, 150mm,250mm,内径均为4.6mm。

糖及碳水化合物的分析XBridge Amide HPLC分析柱，和ACQUITY UPLC BEH Amide超高效液相色谱柱1、将复杂基质中的干扰成分如盐、色素等和糖完全分开2、从根本上解决了氨基键合硅胶柱不能耐受高 pH和键合相流失严重的问题，柱寿命大大延长，同时避免了氨基柱和糖形成Schiff碱的问题3、性能大大优于传统硅胶基质氨基柱 4、3.5μm 粒径更提升柱效与分辨率更详细的产品介绍请见XBridge与ACQUITY UPLC BEH产品相关章节。离子交换柱(钙基)Sugar-Pak TM Ⅰ色谱柱，用于单糖，二糖等低分子量糖及糖醇的分离，例如，药厂维生素C原料中山梨醇，甘露醇等的分析；葡萄酒、啤酒中糖及乙醇含量的分析。在80-90C高温条件下，水作为流动相进行分析。高效碳水化合物分析柱(经典硅胶氨基柱)高效碳水化合物分析柱用于单糖、二糖和三糖等低分子量糖的分离。流动相通常为65-85%乙腈/水溶液，温度为室温到70C。离子交换柱 规格 部件号Sugar-Pak 1色谱柱 6.5 x 300mm WAT085188Sugar-Pak 1Guard-Pak TM 保护柱芯 10/包 WAT015209保护柱套 WAT088141碳水化合物分析柱碳水化合物分析柱 3.9 x 300mm WAT084038碳水化合物分析柱卡套柱柱芯(需配合卡套柱套使用) 4.6 x 250mm WAT044355卡套柱套(包括接头和C-环形箍) WAT037525保护柱芯(2/包)(需配合Sentry保护柱套使用) 3.9 x 20mm WAT046895Sentry TM 一体式保护柱套(配合用于卡套柱) WAT046905