抄回去好好看看,,,
happy_cheng(happy_cheng) 发表:26 ALARM# ICS:Data supplied to ICS out of range
27 ALARM# ICS:No instrument START
28 ALARM# ICS:Incorrect ACS Command sequence
29 ALARM# ICS:Reading attempted with no measure
30 ALARM# ICS:Power up instrument controller
31 ALARM# ICS:Link ICS-MSC USART-2,ICS Input buffer full
32 ALARM# ICS:Link ICS-MSC USART-1,ICS Input buffer full
33 ALARM# ICS:Autosampler timeout
34 ALARM# ICS:Command not executed bu ICS
35 ALARM# ICS:Link ACS-ICS USART-1,checksum error
36 ALARM# ICS:Illegal command received from ACS
37 ALARM# ICS:Link ACS-ICS USART-1,transmission error
38 ALARM# ICS:Illegal ACS string format to ICS
39 ALARM# ICS:Undefined status parameters on ICS
40 ALARM# ICS:Robot'breackdown' detected by ICS
41 ALARM# ICS:Link ICS-MSC USART-2,checksum error on MSC
42 ALARM# ICS:SEQ:ERR.GRATING 1 on
43 ALARM# ICS:SEQ:ERR.GRATING 2 on
44 ALARM# ICS:Optical filter carrousel unsynchronised
45 ALARM# ICS:Illegal optical filter nr selection
46 ALARM# ICS:SEQ:Invalid command
47 ALARM# ICS:SEQ:Lambda too high
48 ALARM# ICS:SEQ:M1:2 switchs on
49 ALARM# ICS:SEQ:M1:2 limit error
50 ALARM# ICS:M1 locked at SW1